linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Lin <shawn.lin@rock-chips.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, Shawn Lin <shawn.lin@rock-chips.com>,
	Kishon Vijay Abraham I <kishon@ti.com>
Subject: [PATCH 2/9] PCI: dra7xx: Use pci_alloc_intx_irqd() helper to simplify the code
Date: Fri, 27 Apr 2018 16:22:59 +0800	[thread overview]
Message-ID: <1524817379-239123-1-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1524817322-239028-1-git-send-email-shawn.lin@rock-chips.com>

Just avoid code duplication, but no functional change intended.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

 drivers/pci/dwc/pci-dra7xx.c | 41 ++---------------------------------------
 1 file changed, 2 insertions(+), 39 deletions(-)

diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index ed8558d..45f6456 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -212,43 +212,6 @@ static int dra7xx_pcie_host_init(struct pcie_port *pp)
 	.host_init = dra7xx_pcie_host_init,
 };
 
-static int dra7xx_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
-				irq_hw_number_t hwirq)
-{
-	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
-	irq_set_chip_data(irq, domain->host_data);
-
-	return 0;
-}
-
-static const struct irq_domain_ops intx_domain_ops = {
-	.map = dra7xx_pcie_intx_map,
-	.xlate = pci_irqd_intx_xlate,
-};
-
-static int dra7xx_pcie_init_irq_domain(struct pcie_port *pp)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct device *dev = pci->dev;
-	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
-	struct device_node *node = dev->of_node;
-	struct device_node *pcie_intc_node =  of_get_next_child(node, NULL);
-
-	if (!pcie_intc_node) {
-		dev_err(dev, "No PCIe Intc node found\n");
-		return -ENODEV;
-	}
-
-	dra7xx->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
-						   &intx_domain_ops, pp);
-	if (!dra7xx->irq_domain) {
-		dev_err(dev, "Failed to get a INTx IRQ domain\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
 {
 	struct dra7xx_pcie *dra7xx = arg;
@@ -454,8 +417,8 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
 		return ret;
 	}
 
-	ret = dra7xx_pcie_init_irq_domain(pp);
-	if (ret < 0)
+	dra7xx->irq_domain = pci_alloc_intx_irqd(dev, dra7xx, true, NULL, NULL);
+	if (IS_ERR(dra7xx->irq_domain))
 		return ret;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbics");
-- 
1.9.1

  parent reply	other threads:[~2018-04-27  8:30 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27  8:22 [PATCH 0/9] Add new helper to allocate irq domain for hosts Shawn Lin
2018-04-27  8:22 ` [PATCH 1/9] PCI: Add new helper for allocating irq domain for INTx Shawn Lin
2018-04-27 17:18   ` Bjorn Helgaas
2018-04-28  0:44     ` Shawn Lin
2018-04-28 22:52   ` kbuild test robot
2018-04-28 23:08   ` kbuild test robot
2018-04-27  8:22 ` Shawn Lin [this message]
2018-04-27  8:23 ` [PATCH 3/9] PCI: keystone-dw: Use pci_alloc_intx_irqd() helper to get " Shawn Lin
2018-04-27  8:23 ` [PATCH 4/9] PCI: aardvark: " Shawn Lin
2018-04-27  8:23 ` [PATCH 5/9] PCI: faraday: " Shawn Lin
2018-04-28 23:32   ` kbuild test robot
2018-04-27  8:24 ` [PATCH 6/9] PCI: altera: " Shawn Lin
2018-04-27  8:24 ` [PATCH 7/9] PCI: mediatek: " Shawn Lin
2018-04-27  8:24 ` [PATCH 8/9] PCI: xilinx-nwl: " Shawn Lin
2018-04-27  8:25 ` [PATCH 9/9] PCI: xilinx: " Shawn Lin
2018-04-30 10:19 ` [PATCH 0/9] Add new helper to allocate irq domain for hosts Lorenzo Pieralisi
2018-05-02  0:59   ` Shawn Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1524817379-239123-1-git-send-email-shawn.lin@rock-chips.com \
    --to=shawn.lin@rock-chips.com \
    --cc=bhelgaas@google.com \
    --cc=kishon@ti.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).