linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Leonard Crestez <leonard.crestez@nxp.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Richard Zhu <hongxing.zhu@nxp.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	dl-linux-imx <linux-imx@nxp.com>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 4/4] PCI: imx: Add PME_Turn_Off support
Date: Thu, 04 Oct 2018 18:44:06 +0200	[thread overview]
Message-ID: <1538671446.3515.17.camel@pengutronix.de> (raw)
In-Reply-To: <37d60fe2119361381a6a81f439fa1c3ad29db45e.1538670431.git.leonard.crestez@nxp.com>

Am Donnerstag, den 04.10.2018, 16:34 +0000 schrieb Leonard Crestez:
> When the root complex suspends it must send a PME_Turn_Off TLP.
> Implement this by asserting the "turnoff" reset.
> 
> On imx7d this functionality is part of the SRC and exposed through the
> linux reset-controller subsystem. On imx6 equivalent bits are in the
> IOMUXC GPR area which the imx6-pcie driver accesses directly.
> 
> This is only for imx7d right now but it's deliberately implemented as an
> optional reset, ignoring the chip variant:
> * Older dtbs won't have this reset so it will be ignored.
> * Future chips might also expose this as a reset controller.
> 
> For example imx8m (not yet supported) has the exact same
> PCIE_CTRL_APPS_TURNOFF bit in the same location.
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 6ba16fd1373c..2bf80f1ad852 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -50,10 +50,11 @@ struct imx6_pcie {
> > >  	struct clk		*pcie_inbound_axi;
> > >  	struct clk		*pcie;
> > >  	struct regmap		*iomuxc_gpr;
> > >  	struct reset_control	*pciephy_reset;
> > >  	struct reset_control	*apps_reset;
> > > +	struct reset_control	*turnoff_reset;
> >  	enum imx6_pcie_variants variant;
> > >  	u32			tx_deemph_gen1;
> > >  	u32			tx_deemph_gen2_3p5db;
> > >  	u32			tx_deemph_gen2_6db;
> > >  	u32			tx_swing_full;
> @@ -812,10 +813,25 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
> >  	default:
> >  		dev_err(dev, "ltssm_disable not supported\n");
> >  	}
>  }
>  
> +static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
> +{
> > +	reset_control_assert(imx6_pcie->turnoff_reset);
> > +	reset_control_deassert(imx6_pcie->turnoff_reset);
> +
> > +	/*
> > +	 * Components with an upstream port must respond to
> > +	 * PME_Turn_Off with PME_TO_Ack but we can't check.
> > +	 *
> > +	 * The standard recommends a 1-10ms timeout after which to
> > +	 * proceed anyway as if acks were received.
> > +	 */
> > +	usleep_range(1000, 10000);
> +}
> +
>  static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
>  {
> >  	clk_disable_unprepare(imx6_pcie->pcie);
> >  	clk_disable_unprepare(imx6_pcie->pcie_phy);
> >  	clk_disable_unprepare(imx6_pcie->pcie_bus);
> @@ -832,10 +848,11 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
> >  	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
>  
> >  	if (imx6_pcie->variant != IMX7D)
> >  		return 0;
>  
> > +	imx6_pcie_pm_turnoff(imx6_pcie);
> >  	imx6_pcie_clk_disable(imx6_pcie);
> >  	imx6_pcie_ltssm_disable(dev);
>  
> >  	return 0;
>  }
> @@ -959,10 +976,17 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> >  		break;
> >  	default:
> >  		break;
> >  	}
>  
> > +	/* Grab turnoff reset */
> > +	imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
> > +	if (IS_ERR(imx6_pcie->turnoff_reset)) {
> > +		dev_err(dev, "Failed to get TURNOFF reset control\n");
> > +		return PTR_ERR(imx6_pcie->turnoff_reset);
> > +	}
> +
> >  	/* Grab GPR config register range */
> >  	imx6_pcie->iomuxc_gpr =
> >  		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
> >  	if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
> >  		dev_err(dev, "unable to find iomuxc registers\n");

  reply	other threads:[~2018-10-04 16:44 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-04 16:34 [PATCH v2 0/4] PCI: imx: Add PME_Turn_Off support Leonard Crestez
2018-10-04 16:34 ` [PATCH v2 1/4] reset: imx7: Add PCIE_CTRL_APPS_TURNOFF Leonard Crestez
2018-10-04 16:47   ` Philipp Zabel
2018-10-04 17:08     ` Lorenzo Pieralisi
2018-10-04 20:41       ` Leonard Crestez
2018-10-04 16:34 ` [PATCH v2 2/4] dt-bindings: imx6q-pcie: Add turnoff reset for imx7d Leonard Crestez
2018-10-04 16:34 ` [PATCH v2 3/4] ARM: dts: imx7d: Add turnoff reset Leonard Crestez
2018-10-04 16:34 ` [PATCH v2 4/4] PCI: imx: Add PME_Turn_Off support Leonard Crestez
2018-10-04 16:44   ` Lucas Stach [this message]
2018-10-05 10:29   ` Lorenzo Pieralisi
2018-10-05 10:59     ` Philipp Zabel
2018-10-05 11:08       ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1538671446.3515.17.camel@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=andrew.smirnov@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=fabio.estevam@nxp.com \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).