[PATCH v2] PCI: assign bus numbers present in EA capability for bridges

[sundeep.lkml@gmail.com]

From: Subbaraya Sundeep <sbhatta@marvell.com>

As per the spec, bridges with EA capability work
with fixed secondary and subordinate bus numbers.
Hence assign bus numbers to bridges from EA if the
capability exists.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
---
Changes for v2:
	No changes just added Sean Stalley who did EA support for BARs.

 drivers/pci/probe.c           | 58 ++++++++++++++++++++++++++++++++++++++++---
 include/uapi/linux/pci_regs.h |  6 +++++
 2 files changed, 60 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b1c05b5..f41d2e6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1030,6 +1030,40 @@ static void pci_enable_crs(struct pci_dev *pdev)
 
 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 					      unsigned int available_buses);
+/*
+ * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
+ * numbers from EA capability.
+ * @dev: Bridge with EA
+ * @secondary: updated with secondary bus number in EA
+ * @subordinate: updated with subordinate bus number in EA
+ *
+ * If it is a bridge with EA capability then fixed bus numbers are
+ * read from EA capability list and secondary, subordinate reference
+ * variables will be updated. Otherwise secondary and subordinate reference
+ * variables will be zeroed.
+ */
+static void pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *secondary,
+				u8 *subordinate)
+{
+	int ea;
+	int offset;
+	u32 dw;
+
+	*secondary = *subordinate = 0;
+
+	if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+		return;
+
+	/* find PCI EA capability in list */
+	ea = pci_find_capability(dev, PCI_CAP_ID_EA);
+	if (!ea)
+		return;
+
+	offset = ea + PCI_EA_FIRST_ENT;
+	pci_read_config_dword(dev, offset, &dw);
+	*secondary =  dw & PCI_EA_SEC_BUS_MASK;
+	*subordinate = (dw & PCI_EA_SUB_BUS_MASK) >> PCI_EA_SUB_BUS_SHIFT;
+}
 
 /*
  * pci_scan_bridge_extend() - Scan buses behind a bridge
@@ -1064,6 +1098,8 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 	u16 bctl;
 	u8 primary, secondary, subordinate;
 	int broken = 0;
+	u8 fixed_sec, fixed_sub;
+	int next_busnr;
 
 	/*
 	 * Make sure the bridge is powered on to be able to access config
@@ -1163,17 +1199,25 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 		/* Clear errors */
 		pci_write_config_word(dev, PCI_STATUS, 0xffff);
 
+		/* read bus numbers from EA */
+		pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
+
+		next_busnr = max + 1;
+		/* Use secondary bus number in EA */
+		if (fixed_sec)
+			next_busnr = fixed_sec;
+
 		/*
 		 * Prevent assigning a bus number that already exists.
 		 * This can happen when a bridge is hot-plugged, so in this
 		 * case we only re-scan this bus.
 		 */
-		child = pci_find_bus(pci_domain_nr(bus), max+1);
+		child = pci_find_bus(pci_domain_nr(bus), next_busnr);
 		if (!child) {
-			child = pci_add_new_bus(bus, dev, max+1);
+			child = pci_add_new_bus(bus, dev, next_busnr);
 			if (!child)
 				goto out;
-			pci_bus_insert_busn_res(child, max+1,
+			pci_bus_insert_busn_res(child, next_busnr,
 						bus->busn_res.end);
 		}
 		max++;
@@ -1234,7 +1278,13 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 			max += i;
 		}
 
-		/* Set subordinate bus number to its real value */
+		/*
+		 * Set subordinate bus number to its real value.
+		 * If fixed subordinate bus number exists from EA
+		 * capability then use it.
+		 */
+		if (fixed_sub)
+			max = fixed_sub;
 		pci_bus_update_busn_res_end(child, max);
 		pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
 	}
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index e1e9888..c3d0904 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -372,6 +372,12 @@
 #define PCI_EA_FIRST_ENT_BRIDGE	8	/* First EA Entry for Bridges */
 #define  PCI_EA_ES		0x00000007 /* Entry Size */
 #define  PCI_EA_BEI		0x000000f0 /* BAR Equivalent Indicator */
+
+/* EA fixed Secondary and Subordinate bus numbers for Bridge */
+#define PCI_EA_SEC_BUS_MASK	0xff
+#define PCI_EA_SUB_BUS_MASK	0xff00
+#define PCI_EA_SUB_BUS_SHIFT	8
+
 /* 0-5 map to BARs 0-5 respectively */
 #define   PCI_EA_BEI_BAR0		0
 #define   PCI_EA_BEI_BAR5		5
-- 
1.8.3.1