[PATCH v5 3/3] PCI: Set dma-can-stall for HiSilicon chips

[Zhangfei Gao <zhangfei.gao@linaro.org>]

HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
actually on the AMBA bus. These fake PCI devices can support SVA via
SMMU stall feature, by setting dma-can-stall for ACPI platforms.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
---
 drivers/pci/quirks.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5d46ac6..03b0f98 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1823,10 +1823,23 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI
 
 static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
 {
+	struct property_entry properties[] = {
+		PROPERTY_ENTRY_BOOL("dma-can-stall"),
+		{},
+	};
+
 	if (pdev->revision != 0x21 && pdev->revision != 0x30)
 		return;
 
 	pdev->pasid_no_tlp = 1;
+
+	/*
+	 * Set the dma-can-stall property on ACPI platforms. Device tree
+	 * can set it directly.
+	 */
+	if (!pdev->dev.of_node &&
+	    device_add_properties(&pdev->dev, properties))
+		pci_warn(pdev, "could not add stall property");
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
-- 
2.7.4