[PATCH v15 09/17] PCI: imx6: Call host init function directly in resume

[Richard Zhu <hongxing.zhu@nxp.com>]

Call imx6_pcie_host_init() instead of duplicating codes in resume.  Note
that this also means we do MPLL setup again during resume, which we didn't
do before.

[bhelgaas: add MPLL setup note, pointed out by Lucas]
Link: https://lore.kernel.org/r/1656645935-1370-10-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/controller/dwc/pci-imx6.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index eaae144db4f3..2b42c37f1617 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1034,9 +1034,9 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
 		return 0;
 
-	imx6_pcie_assert_core_reset(imx6_pcie);
-	imx6_pcie_init_phy(imx6_pcie);
-	imx6_pcie_deassert_core_reset(imx6_pcie);
+	ret = imx6_pcie_host_init(pp);
+	if (ret)
+		return ret;
 	dw_pcie_setup_rc(pp);
 
 	ret = imx6_pcie_start_link(imx6_pcie->pci);
-- 
2.25.1