linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v15 10/17] PCI: imx6: Turn off regulator when system is in suspend mode
Date: Thu, 14 Jul 2022 15:31:02 +0800	[thread overview]
Message-ID: <1657783869-19194-11-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1657783869-19194-1-git-send-email-hongxing.zhu@nxp.com>

The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().

Move the regulator_disable to the suspend function, turn off regulator when
the system is in suspend mode.

Link: https://lore.kernel.org/r/1656645935-1370-11-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 2b42c37f1617..95815e4255d3 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -670,8 +670,6 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
 
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
-	struct device *dev = imx6_pcie->pci->dev;
-
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 	case IMX8MQ:
@@ -702,14 +700,6 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 		break;
 	}
 
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
-		int ret = regulator_disable(imx6_pcie->vpcie);
-
-		if (ret)
-			dev_err(dev, "failed to disable vpcie regulator: %d\n",
-				ret);
-	}
-
 	/* Some boards don't have PCIe reset GPIO. */
 	if (gpio_is_valid(imx6_pcie->reset_gpio))
 		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
@@ -722,7 +712,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	struct device *dev = pci->dev;
 	int ret;
 
-	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_enable(imx6_pcie->vpcie);
 		if (ret) {
 			dev_err(dev, "failed to enable vpcie regulator: %d\n",
@@ -795,7 +785,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	return 0;
 
 err_clks:
-	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+	if (imx6_pcie->vpcie) {
 		ret = regulator_disable(imx6_pcie->vpcie);
 		if (ret)
 			dev_err(dev, "failed to disable vpcie regulator: %d\n",
@@ -1022,6 +1012,9 @@ static int imx6_pcie_suspend_noirq(struct device *dev)
 		break;
 	}
 
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+
 	return 0;
 }
 
-- 
2.25.1


  parent reply	other threads:[~2022-07-14  7:47 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-14  7:30 [PATCH v15 0/17] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-07-14  7:30 ` [PATCH v15 01/17] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Richard Zhu
2022-07-14  7:30 ` [PATCH v15 02/17] PCI: imx6: Move PHY management functions together Richard Zhu
2022-07-14  7:30 ` [PATCH v15 03/17] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Richard Zhu
2022-07-14  7:30 ` [PATCH v15 04/17] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-07-14  7:30 ` [PATCH v15 05/17] PCI: imx6: Factor out ref clock disable to match enable Richard Zhu
2022-07-14  7:30 ` [PATCH v15 06/17] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Richard Zhu
2022-07-14  7:30 ` [PATCH v15 07/17] PCI: imx6: Propagate .host_init() errors to caller Richard Zhu
2022-07-14  7:31 ` [PATCH v15 08/17] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Richard Zhu
2022-07-14  7:31 ` [PATCH v15 09/17] PCI: imx6: Call host init function directly in resume Richard Zhu
2022-07-14  7:31 ` Richard Zhu [this message]
2022-07-14  7:31 ` [PATCH v15 11/17] PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() Richard Zhu
2022-07-14  7:31 ` [PATCH v15 12/17] PCI: imx6: Mark the link down as non-fatal error Richard Zhu
2022-07-14  7:31 ` [PATCH v15 13/17] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu
2022-07-14  7:31 ` [PATCH v15 14/17] PCI: imx6: Do not hide PHY driver callbacks and refine the error handling Richard Zhu
2022-07-14  7:31 ` [PATCH v15 15/17] PCI: imx6: Disable clocks in reverse order of enable Richard Zhu
2022-07-14  7:31 ` [PATCH v15 16/17] PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier Richard Zhu
2022-07-14  7:31 ` [PATCH v15 17/17] PCI: imx6: Reformat suspend callback to keep symmetric with resume Richard Zhu
2022-07-18 13:19   ` Guenter Roeck
2022-07-19 23:10     ` Bjorn Helgaas
2022-07-14 17:10 ` [PATCH v15 0/17] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1657783869-19194-11-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).