linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, bhelgaas@google.com, robh+dt@kernel.org,
	broonie@kernel.org, lorenzo.pieralisi@arm.com,
	festevam@gmail.com, francesco.dolcini@toradex.com
Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: [PATCH v15 17/17] PCI: imx6: Reformat suspend callback to keep symmetric with resume
Date: Thu, 14 Jul 2022 15:31:09 +0800	[thread overview]
Message-ID: <1657783869-19194-18-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1657783869-19194-1-git-send-email-hongxing.zhu@nxp.com>

Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions.
Encapsulate clocks, regulators disables and PHY uninitialization into
imx6_pcie_host_exit().

To keep suspend/resume symmetric as much as possible, invoke these two
new created functions in suspend callback.

To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().

Link: https://lore.kernel.org/r/1656645935-1370-18-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/controller/dwc/pci-imx6.c | 62 ++++++++++++++++-----------
 1 file changed, 37 insertions(+), 25 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 21e9101f63f0..b7a7e3465f28 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -703,13 +703,6 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
-	int ret;
-
-	ret = imx6_pcie_clk_enable(imx6_pcie);
-	if (ret) {
-		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
-		return ret;
-	}
 
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX8MQ:
@@ -904,6 +897,14 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
 	return 0;
 }
 
+static void imx6_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct device *dev = pci->dev;
+
+	/* Turn off PCIe LTSSM */
+	imx6_pcie_ltssm_disable(dev);
+}
+
 static int imx6_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -923,11 +924,17 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
 	imx6_pcie_assert_core_reset(imx6_pcie);
 	imx6_pcie_init_phy(imx6_pcie);
 
+	ret = imx6_pcie_clk_enable(imx6_pcie);
+	if (ret) {
+		dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
+		goto err_reg_disable;
+	}
+
 	if (imx6_pcie->phy) {
 		ret = phy_power_on(imx6_pcie->phy);
 		if (ret) {
 			dev_err(dev, "pcie phy power up failed\n");
-			goto err_reg_disable;
+			goto err_clk_disable;
 		}
 	}
 
@@ -941,24 +948,40 @@ static int imx6_pcie_host_init(struct pcie_port *pp)
 		ret = phy_init(imx6_pcie->phy);
 		if (ret) {
 			dev_err(dev, "waiting for phy ready timeout!\n");
-			goto err_clk_disable;
+			goto err_phy_off;
 		}
 	}
 	imx6_setup_phy_mpll(imx6_pcie);
 
 	return 0;
 
-err_clk_disable:
-	imx6_pcie_clk_disable(imx6_pcie);
 err_phy_off:
 	if (imx6_pcie->phy)
 		phy_power_off(imx6_pcie->phy);
+err_clk_disable:
+	imx6_pcie_clk_disable(imx6_pcie);
 err_reg_disable:
 	if (imx6_pcie->vpcie)
 		regulator_disable(imx6_pcie->vpcie);
 	return ret;
 }
 
+static void imx6_pcie_host_exit(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+
+	if (imx6_pcie->phy) {
+		if (phy_power_off(imx6_pcie->phy))
+			dev_err(pci->dev, "unable to power off PHY\n");
+		phy_exit(imx6_pcie->phy);
+	}
+	imx6_pcie_clk_disable(imx6_pcie);
+
+	if (imx6_pcie->vpcie)
+		regulator_disable(imx6_pcie->vpcie);
+}
+
 static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
 	.host_init = imx6_pcie_host_init,
 };
@@ -1008,25 +1031,14 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 static int imx6_pcie_suspend_noirq(struct device *dev)
 {
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct pcie_port *pp = &imx6_pcie->pci->pp;
 
 	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
 		return 0;
 
 	imx6_pcie_pm_turnoff(imx6_pcie);
-	imx6_pcie_ltssm_disable(dev);
-	imx6_pcie_clk_disable(imx6_pcie);
-	switch (imx6_pcie->drvdata->variant) {
-	case IMX8MM:
-		if (phy_power_off(imx6_pcie->phy))
-			dev_err(dev, "unable to power off PHY\n");
-		phy_exit(imx6_pcie->phy);
-		break;
-	default:
-		break;
-	}
-
-	if (imx6_pcie->vpcie)
-		regulator_disable(imx6_pcie->vpcie);
+	imx6_pcie_stop_link(imx6_pcie->pci);
+	imx6_pcie_host_exit(pp);
 
 	return 0;
 }
-- 
2.25.1


  parent reply	other threads:[~2022-07-14  7:48 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-14  7:30 [PATCH v15 0/17] PCI: imx6: refine codes and add the error propagation Richard Zhu
2022-07-14  7:30 ` [PATCH v15 01/17] PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier Richard Zhu
2022-07-14  7:30 ` [PATCH v15 02/17] PCI: imx6: Move PHY management functions together Richard Zhu
2022-07-14  7:30 ` [PATCH v15 03/17] PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier Richard Zhu
2022-07-14  7:30 ` [PATCH v15 04/17] PCI: imx6: Move imx6_pcie_clk_disable() earlier Richard Zhu
2022-07-14  7:30 ` [PATCH v15 05/17] PCI: imx6: Factor out ref clock disable to match enable Richard Zhu
2022-07-14  7:30 ` [PATCH v15 06/17] PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() Richard Zhu
2022-07-14  7:30 ` [PATCH v15 07/17] PCI: imx6: Propagate .host_init() errors to caller Richard Zhu
2022-07-14  7:31 ` [PATCH v15 08/17] PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks Richard Zhu
2022-07-14  7:31 ` [PATCH v15 09/17] PCI: imx6: Call host init function directly in resume Richard Zhu
2022-07-14  7:31 ` [PATCH v15 10/17] PCI: imx6: Turn off regulator when system is in suspend mode Richard Zhu
2022-07-14  7:31 ` [PATCH v15 11/17] PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() Richard Zhu
2022-07-14  7:31 ` [PATCH v15 12/17] PCI: imx6: Mark the link down as non-fatal error Richard Zhu
2022-07-14  7:31 ` [PATCH v15 13/17] PCI: imx6: Reduce resume time by only starting link if it was up before suspend Richard Zhu
2022-07-14  7:31 ` [PATCH v15 14/17] PCI: imx6: Do not hide PHY driver callbacks and refine the error handling Richard Zhu
2022-07-14  7:31 ` [PATCH v15 15/17] PCI: imx6: Disable clocks in reverse order of enable Richard Zhu
2022-07-14  7:31 ` [PATCH v15 16/17] PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier Richard Zhu
2022-07-14  7:31 ` Richard Zhu [this message]
2022-07-18 13:19   ` [PATCH v15 17/17] PCI: imx6: Reformat suspend callback to keep symmetric with resume Guenter Roeck
2022-07-19 23:10     ` Bjorn Helgaas
2022-07-14 17:10 ` [PATCH v15 0/17] PCI: imx6: refine codes and add the error propagation Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1657783869-19194-18-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=francesco.dolcini@toradex.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).