From: Arvind Yadav <arvind.yadav.cs@gmail.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: kishon@ti.com, bhelgaas@google.com, linux-omap@vger.kernel.org,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] PCI: dwc: dra7xx: Fix compilation warning.
Date: Fri, 16 Jun 2017 13:48:32 +0530 [thread overview]
Message-ID: <16817169-9f2e-5406-f61c-b2d683559815@gmail.com> (raw)
In-Reply-To: <20170615204951.GD12735@bhelgaas-glaptop.roam.corp.google.com>
Hi Kishon/Bjorn,
What is correct Setting for these two PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI
and
PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN register.
Value of register After change:
register[PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI] = LEG_EP_INTERRUPTS | MSI
= 0x1f
register[PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN] = INTERRUPTS
= 0x1fff
Is this correct?
Thanks
~arvind
On Friday 16 June 2017 02:19 AM, Bjorn Helgaas wrote:
> On Thu, Jun 15, 2017 at 02:19:20PM +0530, Arvind Yadav wrote:
>> drivers/pci/dwc/pci-dra7xx.c: In function ‘dra7xx_pcie_enable_msi_interrupts’:
>> drivers/pci/dwc/pci-dra7xx.c:177:7: warning: large integer implicitly truncated to unsigned type [-Woverflow]
>> ~LEG_EP_INTERRUPTS & ~MSI);
>> ^
>> drivers/pci/dwc/pci-dra7xx.c: In function ‘dra7xx_pcie_enable_wrapper_interrupts’:
>> drivers/pci/dwc/pci-dra7xx.c:187:7: warning: large integer implicitly truncated to unsigned type [-Woverflow]
>> ~INTERRUPTS);
> I don't object to the patch itself (hopefully Kishon will verify that
> it's correct), but the subject and changelog are now completely wrong.
>
> If the patch is correct, it is now a bug fix and is not at all about
> fixing a compilation warning. We used to write
>
> ~LEG_EP_INTERRUPTS & ~MSI
> ~(INTA | INTB | INTC | INTD) & ~MSI
> ~(BIT(0) | BIT(1) | BIT(2) | BIT(3)) & ~(BIT(4))
> ~(0x1 | 0x2 | 0x4 | 0x8) & ~(0x10)
> ~(0xf) & ~(0x10)
> 0xfffffff0 & 0xffffffef
> 0xffffffe0
>
> and now we write
>
> LEG_EP_INTERRUPTS | MSI
> ...
> 0x1f
>
> It is about using these two registers correctly, and the fact that the
> compilation warning goes away is a happy coincidence but not even
> worth mentioning in the changelog.
>
> So, if Kishon acks the content of the patch, please post this again
> with an updated subject and changelog.
>
>> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
>> ---
>> Changes in v2:
>> Add casts in the definitions.
>> Changes in v3:
>> Change logic insted of casting.
>>
>> drivers/pci/dwc/pci-dra7xx.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>> index 8decf46..668dc15 100644
>> --- a/drivers/pci/dwc/pci-dra7xx.c
>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>> @@ -174,7 +174,7 @@ static int dra7xx_pcie_establish_link(struct dw_pcie *pci)
>> static void dra7xx_pcie_enable_msi_interrupts(struct dra7xx_pcie *dra7xx)
>> {
>> dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
>> - ~LEG_EP_INTERRUPTS & ~MSI);
>> + LEG_EP_INTERRUPTS | MSI);
>>
>> dra7xx_pcie_writel(dra7xx,
>> PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
>> @@ -184,7 +184,7 @@ static void dra7xx_pcie_enable_msi_interrupts(struct dra7xx_pcie *dra7xx)
>> static void dra7xx_pcie_enable_wrapper_interrupts(struct dra7xx_pcie *dra7xx)
>> {
>> dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
>> - ~INTERRUPTS);
>> + INTERRUPTS);
>> dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN,
>> INTERRUPTS);
>> }
>> --
>> 1.9.1
>>
next prev parent reply other threads:[~2017-06-16 8:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-15 8:49 [PATCH v3] PCI: dwc: dra7xx: Fix compilation warning Arvind Yadav
2017-06-15 20:49 ` Bjorn Helgaas
2017-06-16 8:18 ` Arvind Yadav [this message]
2017-06-19 9:19 ` Kishon Vijay Abraham I
2017-06-19 9:31 ` Arvind Yadav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16817169-9f2e-5406-f61c-b2d683559815@gmail.com \
--to=arvind.yadav.cs@gmail.com \
--cc=bhelgaas@google.com \
--cc=helgaas@kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).