[PATCH v1 0/9] A bunch of changes to refine i.MX PCIe driver

[PATCH v1 0/9] A bunch of changes to refine i.MX PCIe driver

[Richard Zhu]

A bunch of changes to refine i.MX PCIe driver.
- Add ref clock gate for i.MX95 PCIe by #1, #2 and #9 patches.
  The changes of clock part is here [1].
  [1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/1725525535-22924-1-git-send-email-hongxing.zhu@nxp.com/
- #3 and #4 patches clean i.MX PCIe driver by removing useless codes.
  Patch #3 depends on [2].
  [2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/1723534943-28499-1-git-send-email-hongxing.zhu@nxp.com/
- Make core reset and enable_ref_clk symmetric for i.MX PCIe driver by
  #5 and #6 patches.
- Use dwc common suspend resume method, and enable i.MX8MQ, i.MX8Q and
  i.MX95 PCIe PM supports by #7 and #8 patches.

[PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe
[PATCH v1 2/9] PCI: imx6: Add ref clock for i.MX95 PCIe
[PATCH v1 3/9] PCI: imx6: Fetch dbi2 and iATU base addesses from DT
[PATCH v1 4/9] PCI: imx6: Correct controller_id generation logic for
[PATCH v1 5/9] PCI: imx6: Make core reset assertion deassertion
[PATCH v1 6/9] PCI: imx6: Make *_enable_ref_clk() function symmetric
[PATCH v1 7/9] PCI: imx6: Use dwc common suspend resume method
[PATCH v1 8/9] PCI: imx6: Add i.MX8MQ i.MX8Q and i.MX95 PCIe PM
[PATCH v1 9/9] arm64: dts: imx95: Add ref clock for i.MX95 PCIe

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml |   4 +-
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml        |  25 ++++++++++--
arch/arm64/boot/dts/freescale/imx95.dtsi                         |  25 ++++++++++--
drivers/pci/controller/dwc/pci-imx6.c                            | 166 +++++++++++++++++++++++++++-------------------------------------------------
drivers/pci/controller/dwc/pcie-designware-host.c                |  31 ++++++++-------
5 files changed, 119 insertions(+), 132 deletions(-)

[PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe

[Richard Zhu]

Add one ref clock for i.MX95 PCIe. Increase clocks' maxItems to 5 and
keep the same restriction with other compatible string.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 .../bindings/pci/fsl,imx6q-pcie-common.yaml   |  4 +--
 .../bindings/pci/fsl,imx6q-pcie.yaml          | 25 ++++++++++++++++---
 2 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
index a8b34f58f8f4..cddbe21f99f2 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -17,11 +17,11 @@ description:
 properties:
   clocks:
     minItems: 3
-    maxItems: 4
+    maxItems: 5
 
   clock-names:
     minItems: 3
-    maxItems: 4
+    maxItems: 5
 
   num-lanes:
     const: 1
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index 1e05c560d797..4c76cd3f98a9 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -40,10 +40,11 @@ properties:
       - description: PCIe PHY clock.
       - description: Additional required clock entry for imx6sx-pcie,
            imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+      - description: PCIe reference clock.
 
   clock-names:
     minItems: 3
-    maxItems: 4
+    maxItems: 5
 
   interrupts:
     items:
@@ -127,7 +128,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: pcie
@@ -140,11 +141,10 @@ allOf:
         compatible:
           enum:
             - fsl,imx8mq-pcie
-            - fsl,imx95-pcie
     then:
       properties:
         clocks:
-          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: pcie
@@ -200,6 +200,23 @@ allOf:
             - const: mstr
             - const: slv
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx95-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+            - const: ref
+
 unevaluatedProperties: false
 
 examples:
-- 
2.37.1

Re: [PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 440 bytes --]

On Tue, Sep 24, 2024 at 11:27:36AM +0800, Richard Zhu wrote:
> Add one ref clock for i.MX95 PCIe. Increase clocks' maxItems to 5 and
> keep the same restriction with other compatible string.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

It'd be really good to mention why this clock is appearing now, when it
did not before. You're just explaining what you've done, which can be
seen in the diff, but not why you did it.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe

[Frank Li]

On Tue, Sep 24, 2024 at 11:08:20AM +0100, Conor Dooley wrote:
> On Tue, Sep 24, 2024 at 11:27:36AM +0800, Richard Zhu wrote:
> > Add one ref clock for i.MX95 PCIe. Increase clocks' maxItems to 5 and
> > keep the same restriction with other compatible string.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
>
> It'd be really good to mention why this clock is appearing now, when it
> did not before. You're just explaining what you've done, which can be
> seen in the diff, but not why you did it.

Previous reference clock of i.MX95 is on when system boot to kernel. But
boot firmware change the behavor, so it is off when boot. So it need be
turn on when it use. Also it need be turn off/on when suspend and resume.
Previous miss this feature.

Frank

Re: [PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 930 bytes --]

On Tue, Sep 24, 2024 at 11:23:06AM -0400, Frank Li wrote:
> On Tue, Sep 24, 2024 at 11:08:20AM +0100, Conor Dooley wrote:
> > On Tue, Sep 24, 2024 at 11:27:36AM +0800, Richard Zhu wrote:
> > > Add one ref clock for i.MX95 PCIe. Increase clocks' maxItems to 5 and
> > > keep the same restriction with other compatible string.
> > >
> > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> >
> > It'd be really good to mention why this clock is appearing now, when it
> > did not before. You're just explaining what you've done, which can be
> > seen in the diff, but not why you did it.
> 
> Previous reference clock of i.MX95 is on when system boot to kernel. But
> boot firmware change the behavor, so it is off when boot. So it need be
> turn on when it use. Also it need be turn off/on when suspend and resume.
> Previous miss this feature.

Please put this in the commit message Richard.

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

RE: [PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95 PCIe

[Hongxing Zhu]

> -----Original Message-----
> From: Conor Dooley <conor@kernel.org>
> Sent: 2024年9月25日 0:04
> To: Frank Li <frank.li@nxp.com>
> Cc: Hongxing Zhu <hongxing.zhu@nxp.com>; l.stach@pengutronix.de;
> kwilczynski@kernel.org; bhelgaas@google.com; lpieralisi@kernel.org;
> robh+dt@kernel.org; conor+dt@kernel.org; shawnguo@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; festevam@gmail.com;
> s.hauer@pengutronix.de; linux-pci@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; kernel@pengutronix.de; imx@lists.linux.dev
> Subject: Re: [PATCH v1 1/9] dt-bindings: imx6q-pcie: Add ref clock for i.MX95
> PCIe
> 
> On Tue, Sep 24, 2024 at 11:23:06AM -0400, Frank Li wrote:
> > On Tue, Sep 24, 2024 at 11:08:20AM +0100, Conor Dooley wrote:
> > > On Tue, Sep 24, 2024 at 11:27:36AM +0800, Richard Zhu wrote:
> > > > Add one ref clock for i.MX95 PCIe. Increase clocks' maxItems to 5
> > > > and keep the same restriction with other compatible string.
> > > >
> > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > >
> > > It'd be really good to mention why this clock is appearing now, when
> > > it did not before. You're just explaining what you've done, which
> > > can be seen in the diff, but not why you did it.
> >
> > Previous reference clock of i.MX95 is on when system boot to kernel.
> > But boot firmware change the behavor, so it is off when boot. So it
> > need be turn on when it use. Also it need be turn off/on when suspend and
> resume.
> > Previous miss this feature.
> 
> Please put this in the commit message Richard.
Hi Conor:
Thanks for your comments.
Would add these information in the commit message later.

Best Regards
Richard Zhu
> 
> Thanks,
> Conor.

[PATCH v1 2/9] PCI: imx6: Add ref clock for i.MX95 PCIe

[Richard Zhu]

Add "ref" clock to enable reference clock.

If use external clock, ref clock should point to external reference.

If use internal clock, CREF_EN in LAST_TO_REG controls reference output,
which implement in drivers/clk/imx/clk-imx95-blk-ctl.c.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 0dbc333adcff..2aa02674c817 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1480,6 +1480,7 @@ static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
 static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
 static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
 static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"};
+static const char * const imx95_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux", "ref"};
 
 static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX6Q] = {
@@ -1593,8 +1594,8 @@ static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX95] = {
 		.variant = IMX95,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES,
-		.clk_names = imx8mq_clks,
-		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
+		.clk_names = imx95_clks,
+		.clks_cnt = ARRAY_SIZE(imx95_clks),
 		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
 		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
 		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
-- 
2.37.1

Re: [PATCH v1 2/9] PCI: imx6: Add ref clock for i.MX95 PCIe

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:37AM +0800, Richard Zhu wrote:
> Add "ref" clock to enable reference clock.
>
> If use external clock, ref clock should point to external reference.
>
> If use internal clock, CREF_EN in LAST_TO_REG controls reference output,
> which implement in drivers/clk/imx/clk-imx95-blk-ctl.c.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 0dbc333adcff..2aa02674c817 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1480,6 +1480,7 @@ static const char * const imx8mm_clks[] = {"pcie_bus", "pcie", "pcie_aux"};
>  static const char * const imx8mq_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux"};
>  static const char * const imx6sx_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_inbound_axi"};
>  static const char * const imx8q_clks[] = {"mstr", "slv", "dbi"};
> +static const char * const imx95_clks[] = {"pcie_bus", "pcie", "pcie_phy", "pcie_aux", "ref"};
>
>  static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX6Q] = {
> @@ -1593,8 +1594,8 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX95] = {
>  		.variant = IMX95,
>  		.flags = IMX_PCIE_FLAG_HAS_SERDES,
> -		.clk_names = imx8mq_clks,
> -		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
> +		.clk_names = imx95_clks,
> +		.clks_cnt = ARRAY_SIZE(imx95_clks),
>  		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
>  		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
>  		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
> --
> 2.37.1
>

[PATCH v1 3/9] PCI: imx6: Fetch dbi2 and iATU base addesses from DT

[Richard Zhu]

Since dbi2 and atu regs are added for i.MX8M PCIes. Fetch the dbi2 and iATU
base addresses from DT directly, and remove the useless codes.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 2aa02674c817..e8e401729893 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1113,7 +1113,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
 			   struct platform_device *pdev)
 {
 	int ret;
-	unsigned int pcie_dbi2_offset;
 	struct dw_pcie_ep *ep;
 	struct dw_pcie *pci = imx_pcie->pci;
 	struct dw_pcie_rp *pp = &pci->pp;
@@ -1123,25 +1122,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
 	ep = &pci->ep;
 	ep->ops = &pcie_ep_ops;
 
-	switch (imx_pcie->drvdata->variant) {
-	case IMX8MQ_EP:
-	case IMX8MM_EP:
-	case IMX8MP_EP:
-		pcie_dbi2_offset = SZ_1M;
-		break;
-	default:
-		pcie_dbi2_offset = SZ_4K;
-		break;
-	}
-
-	pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
-
-	/*
-	 * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining
-	 * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC
-	 * core code can fetch that from DT. But once all platform DTs were fixed, this and the
-	 * above "dbi_base2" setting should be removed.
-	 */
 	if (device_property_match_string(dev, "reg-names", "dbi2") >= 0)
 		pci->dbi_base2 = NULL;
 
-- 
2.37.1

[PATCH v1 4/9] PCI: imx6: Correct controller_id generation logic for i.MX7D

[Richard Zhu]

i.MX7D only has one PCIe controller, so controller_id should always be 0.
The previous code is incorrect although yielding the correct result.
Fix by removing IMX7D from the switch case branch.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index e8e401729893..d49154dbb1bd 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1338,7 +1338,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
 	switch (imx_pcie->drvdata->variant) {
 	case IMX8MQ:
 	case IMX8MQ_EP:
-	case IMX7D:
 		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
 			imx_pcie->controller_id = 1;
 		break;
-- 
2.37.1

Re: [PATCH v1 4/9] PCI: imx6: Correct controller_id generation logic for i.MX7D

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:39AM +0800, Richard Zhu wrote:
> i.MX7D only has one PCIe controller, so controller_id should always be 0.
> The previous code is incorrect although yielding the correct result.
> Fix by removing IMX7D from the switch case branch.

nit: wrap to 75 chars.

>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/pci/controller/dwc/pci-imx6.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index e8e401729893..d49154dbb1bd 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1338,7 +1338,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	switch (imx_pcie->drvdata->variant) {
>  	case IMX8MQ:
>  	case IMX8MQ_EP:
> -	case IMX7D:
>  		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
>  			imx_pcie->controller_id = 1;
>  		break;
> --
> 2.37.1
>

Re: [PATCH v1 4/9] PCI: imx6: Correct controller_id generation logic for i.MX7D

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:39AM +0800, Richard Zhu wrote:
> i.MX7D only has one PCIe controller, so controller_id should always be 0.
> The previous code is incorrect although yielding the correct result.
> Fix by removing IMX7D from the switch case branch.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index e8e401729893..d49154dbb1bd 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1338,7 +1338,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	switch (imx_pcie->drvdata->variant) {
>  	case IMX8MQ:
>  	case IMX8MQ_EP:
> -	case IMX7D:
>  		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
>  			imx_pcie->controller_id = 1;
>  		break;
> --
> 2.37.1
>

[PATCH v1 5/9] PCI: imx6: Make core reset assertion deassertion symmetric

[Richard Zhu]

Add apps_reset deassertion in the imx_pcie_deassert_core_reset().
Let it be symmetric with imx_pcie_assert_core_reset().

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d49154dbb1bd..f306f2e9dcce 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -770,6 +770,7 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
 static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
 {
 	reset_control_deassert(imx_pcie->pciephy_reset);
+	reset_control_deassert(imx_pcie->apps_reset);
 
 	if (imx_pcie->drvdata->core_reset)
 		imx_pcie->drvdata->core_reset(imx_pcie, false);
-- 
2.37.1

Re: [PATCH v1 5/9] PCI: imx6: Make core reset assertion deassertion symmetric

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:40AM +0800, Richard Zhu wrote:
> Add apps_reset deassertion in the imx_pcie_deassert_core_reset().
> Let it be symmetric with imx_pcie_assert_core_reset().
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/pci/controller/dwc/pci-imx6.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index d49154dbb1bd..f306f2e9dcce 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -770,6 +770,7 @@ static void imx_pcie_assert_core_reset(struct imx_pcie *imx_pcie)
>  static int imx_pcie_deassert_core_reset(struct imx_pcie *imx_pcie)
>  {
>  	reset_control_deassert(imx_pcie->pciephy_reset);
> +	reset_control_deassert(imx_pcie->apps_reset);
>
>  	if (imx_pcie->drvdata->core_reset)
>  		imx_pcie->drvdata->core_reset(imx_pcie, false);
> --
> 2.37.1
>

[PATCH v1 6/9] PCI: imx6: Make *_enable_ref_clk() function symmetric

[Richard Zhu]

Ensure the *_enable_ref_clk() function is symmetric by addressing missing
disable parts on some platforms. Also, remove the duplicate
imx7d_pcie_init_phy() function as it is the same as
imx7d_pcie_enable_ref_clk().

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 33 +++++++++++----------------
 1 file changed, 13 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index f306f2e9dcce..5ec43d9f9784 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -388,13 +388,6 @@ static int imx8mq_pcie_init_phy(struct imx_pcie *imx_pcie)
 	return 0;
 }
 
-static int imx7d_pcie_init_phy(struct imx_pcie *imx_pcie)
-{
-	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
-
-	return 0;
-}
-
 static int imx_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
 	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -593,13 +586,13 @@ static int imx_pcie_attach_pd(struct device *dev)
 
 static int imx6sx_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
-	if (enable)
-		regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				  IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
-
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
+			   enable ? 0 : IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
 	return 0;
 }
 
+
 static int imx6q_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
 	if (enable) {
@@ -625,19 +618,20 @@ static int imx8mm_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
 	int offset = imx_pcie_grp_offset(imx_pcie);
 
-	if (enable) {
-		regmap_clear_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
-		regmap_set_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
-	}
-
+	regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
+			   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
+			   enable ? 0 : IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
+	regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
+			   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
+			   enable ? IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN : 0);
 	return 0;
 }
 
 static int imx7d_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
 {
-	if (!enable)
-		regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+			   enable ? 0 : IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
 	return 0;
 }
 
@@ -1522,7 +1516,6 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.clks_cnt = ARRAY_SIZE(imx6q_clks),
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
-		.init_phy = imx7d_pcie_init_phy,
 		.enable_ref_clk = imx7d_pcie_enable_ref_clk,
 		.core_reset = imx7d_pcie_core_reset,
 	},
-- 
2.37.1

Re: [PATCH v1 6/9] PCI: imx6: Make *_enable_ref_clk() function symmetric

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:41AM +0800, Richard Zhu wrote:
> Ensure the *_enable_ref_clk() function is symmetric by addressing missing
> disable parts on some platforms. Also, remove the duplicate
> imx7d_pcie_init_phy() function as it is the same as
> imx7d_pcie_enable_ref_clk().
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 33 +++++++++++----------------
>  1 file changed, 13 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index f306f2e9dcce..5ec43d9f9784 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -388,13 +388,6 @@ static int imx8mq_pcie_init_phy(struct imx_pcie *imx_pcie)
>  	return 0;
>  }
>
> -static int imx7d_pcie_init_phy(struct imx_pcie *imx_pcie)
> -{
> -	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
> -
> -	return 0;
> -}
> -
>  static int imx_pcie_init_phy(struct imx_pcie *imx_pcie)
>  {
>  	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> @@ -593,13 +586,13 @@ static int imx_pcie_attach_pd(struct device *dev)
>
>  static int imx6sx_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
>  {
> -	if (enable)
> -		regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				  IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
> -
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> +			   IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
> +			   enable ? 0 : IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
>  	return 0;
>  }
>
> +
>  static int imx6q_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
>  {
>  	if (enable) {
> @@ -625,19 +618,20 @@ static int imx8mm_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
>  {
>  	int offset = imx_pcie_grp_offset(imx_pcie);
>
> -	if (enable) {
> -		regmap_clear_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
> -		regmap_set_bits(imx_pcie->iomuxc_gpr, offset, IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN);
> -	}
> -
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
> +			   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE,
> +			   enable ? 0 : IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE);
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, offset,
> +			   IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN,
> +			   enable ? IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN : 0);
>  	return 0;
>  }
>
>  static int imx7d_pcie_enable_ref_clk(struct imx_pcie *imx_pcie, bool enable)
>  {
> -	if (!enable)
> -		regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> -				IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> +	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
> +			   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> +			   enable ? 0 : IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
>  	return 0;
>  }
>
> @@ -1522,7 +1516,6 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  		.clks_cnt = ARRAY_SIZE(imx6q_clks),
>  		.mode_off[0] = IOMUXC_GPR12,
>  		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> -		.init_phy = imx7d_pcie_init_phy,
>  		.enable_ref_clk = imx7d_pcie_enable_ref_clk,
>  		.core_reset = imx7d_pcie_core_reset,
>  	},
> --
> 2.37.1
>

[PATCH v1 7/9] PCI: imx6: Use dwc common suspend resume method

[Richard Zhu]

From: Frank Li <Frank.Li@nxp.com>

Call common dwc suspend/resume function. Use dwc common iATU method to send
out PME_TURN_OFF message. Old platform such as iMX6SX and iMX6QP, iATU
CTRL2 bit 22 (PCIE_ATU_INHIBIT_PAYLOAD) are reserved. So can't send out MSG
without data by dummy MMIO write. Without PCIE_ATU_INHIBIT_PAYLOAD, MSGD
will be sent out instead of MSG. So keep old method to send PME_TURN_OFF
MSG.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 97 ++++++++++-----------------
 1 file changed, 36 insertions(+), 61 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 5ec43d9f9784..36df439d43ae 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -33,6 +33,7 @@
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 
+#include "../../pci.h"
 #include "pcie-designware.h"
 
 #define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
@@ -82,6 +83,7 @@ enum imx_pcie_variants {
 #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
 #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
 #define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
+#define IMX_PCIE_FLAG_CUSTOM_PME_TURNOFF	BIT(9)
 
 #define imx_check_flag(pci, val)	(pci->drvdata->flags & val)
 
@@ -106,19 +108,18 @@ struct imx_pcie_drvdata {
 	int (*init_phy)(struct imx_pcie *pcie);
 	int (*enable_ref_clk)(struct imx_pcie *pcie, bool enable);
 	int (*core_reset)(struct imx_pcie *pcie, bool assert);
+	const struct dw_pcie_host_ops *ops;
 };
 
 struct imx_pcie {
 	struct dw_pcie		*pci;
 	struct gpio_desc	*reset_gpiod;
-	bool			link_is_up;
 	struct clk_bulk_data	clks[IMX_PCIE_MAX_CLKS];
 	struct regmap		*iomuxc_gpr;
 	u16			msi_ctrl;
 	u32			controller_id;
 	struct reset_control	*pciephy_reset;
 	struct reset_control	*apps_reset;
-	struct reset_control	*turnoff_reset;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2_3p5db;
 	u32			tx_deemph_gen2_6db;
@@ -898,13 +899,11 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
 		dev_info(dev, "Link: Only Gen1 is enabled\n");
 	}
 
-	imx_pcie->link_is_up = true;
 	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
 	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
 	return 0;
 
 err_reset_phy:
-	imx_pcie->link_is_up = false;
 	dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
 		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
 		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
@@ -1023,9 +1022,33 @@ static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
 	return (cpu_addr - offset);
 }
 
+/*
+ * Old dwc iATU ctrl2 bit 22 (PCIE_ATU_INHIBIT_PAYLOAD) are reserved. So can't
+ * send out MSG without data by dummy MMIO write. Without
+ * PCIE_ATU_INHIBIT_PAYLOAD, MSGD will be sent out. So have to keep old method
+ * to send PME_TURN_OFF MSG.
+ */
+static void imx_pcie_pm_turn_off(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
+
+	regmap_set_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_PM_TURN_OFF);
+	regmap_clear_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_PM_TURN_OFF);
+
+	usleep_range(PCIE_PME_TO_L2_TIMEOUT_US/10, PCIE_PME_TO_L2_TIMEOUT_US);
+}
+
+
 static const struct dw_pcie_host_ops imx_pcie_host_ops = {
 	.init = imx_pcie_host_init,
 	.deinit = imx_pcie_host_exit,
+	.pme_turn_off = imx_pcie_pm_turn_off,
+};
+
+static const struct dw_pcie_host_ops imx_pcie_host_dw_pme_ops = {
+	.init = imx_pcie_host_init,
+	.deinit = imx_pcie_host_exit,
 };
 
 static const struct dw_pcie_ops dw_pcie_ops = {
@@ -1146,43 +1169,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
 	return 0;
 }
 
-static void imx_pcie_pm_turnoff(struct imx_pcie *imx_pcie)
-{
-	struct device *dev = imx_pcie->pci->dev;
-
-	/* Some variants have a turnoff reset in DT */
-	if (imx_pcie->turnoff_reset) {
-		reset_control_assert(imx_pcie->turnoff_reset);
-		reset_control_deassert(imx_pcie->turnoff_reset);
-		goto pm_turnoff_sleep;
-	}
-
-	/* Others poke directly at IOMUXC registers */
-	switch (imx_pcie->drvdata->variant) {
-	case IMX6SX:
-	case IMX6QP:
-		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				IMX6SX_GPR12_PCIE_PM_TURN_OFF,
-				IMX6SX_GPR12_PCIE_PM_TURN_OFF);
-		regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
-		break;
-	default:
-		dev_err(dev, "PME_Turn_Off not implemented\n");
-		return;
-	}
-
-	/*
-	 * Components with an upstream port must respond to
-	 * PME_Turn_Off with PME_TO_Ack but we can't check.
-	 *
-	 * The standard recommends a 1-10ms timeout after which to
-	 * proceed anyway as if acks were received.
-	 */
-pm_turnoff_sleep:
-	usleep_range(1000, 10000);
-}
-
 static void imx_pcie_msi_save_restore(struct imx_pcie *imx_pcie, bool save)
 {
 	u8 offset;
@@ -1206,36 +1192,26 @@ static void imx_pcie_msi_save_restore(struct imx_pcie *imx_pcie, bool save)
 static int imx_pcie_suspend_noirq(struct device *dev)
 {
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
-	struct dw_pcie_rp *pp = &imx_pcie->pci->pp;
 
 	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_SUPPORTS_SUSPEND))
 		return 0;
 
 	imx_pcie_msi_save_restore(imx_pcie, true);
-	imx_pcie_pm_turnoff(imx_pcie);
-	imx_pcie_stop_link(imx_pcie->pci);
-	imx_pcie_host_exit(pp);
-
-	return 0;
+	return dw_pcie_suspend_noirq(imx_pcie->pci);
 }
 
 static int imx_pcie_resume_noirq(struct device *dev)
 {
 	int ret;
 	struct imx_pcie *imx_pcie = dev_get_drvdata(dev);
-	struct dw_pcie_rp *pp = &imx_pcie->pci->pp;
 
 	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_SUPPORTS_SUSPEND))
 		return 0;
 
-	ret = imx_pcie_host_init(pp);
+	ret = dw_pcie_resume_noirq(imx_pcie->pci);
 	if (ret)
 		return ret;
 	imx_pcie_msi_save_restore(imx_pcie, false);
-	dw_pcie_setup_rc(pp);
-
-	if (imx_pcie->link_is_up)
-		imx_pcie_start_link(imx_pcie->pci);
 
 	return 0;
 }
@@ -1267,11 +1243,14 @@ static int imx_pcie_probe(struct platform_device *pdev)
 
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
-	pci->pp.ops = &imx_pcie_host_ops;
 
 	imx_pcie->pci = pci;
 	imx_pcie->drvdata = of_device_get_match_data(dev);
 
+	pci->pp.ops = &imx_pcie_host_dw_pme_ops;
+	if (imx_pcie->drvdata->ops)
+		pci->pp.ops = imx_pcie->drvdata->ops;
+
 	/* Find the PHY if one is defined, only imx7d uses it */
 	np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0);
 	if (np) {
@@ -1340,13 +1319,6 @@ static int imx_pcie_probe(struct platform_device *pdev)
 		break;
 	}
 
-	/* Grab turnoff reset */
-	imx_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
-	if (IS_ERR(imx_pcie->turnoff_reset)) {
-		dev_err(dev, "Failed to get TURNOFF reset control\n");
-		return PTR_ERR(imx_pcie->turnoff_reset);
-	}
-
 	if (imx_pcie->drvdata->gpr) {
 	/* Grab GPR config register range */
 		imx_pcie->iomuxc_gpr =
@@ -1425,6 +1397,7 @@ static int imx_pcie_probe(struct platform_device *pdev)
 		if (ret < 0)
 			return ret;
 	} else {
+		pci->pp.use_atu_msg = true;
 		ret = dw_pcie_host_init(&pci->pp);
 		if (ret < 0)
 			return ret;
@@ -1488,6 +1461,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.init_phy = imx6sx_pcie_init_phy,
 		.enable_ref_clk = imx6sx_pcie_enable_ref_clk,
 		.core_reset = imx6sx_pcie_core_reset,
+		.ops = &imx_pcie_host_ops,
 	},
 	[IMX6QP] = {
 		.variant = IMX6QP,
@@ -1505,6 +1479,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.init_phy = imx_pcie_init_phy,
 		.enable_ref_clk = imx6q_pcie_enable_ref_clk,
 		.core_reset = imx6qp_pcie_core_reset,
+		.ops = &imx_pcie_host_ops,
 	},
 	[IMX7D] = {
 		.variant = IMX7D,
-- 
2.37.1

[PATCH v1 8/9] PCI: imx6: Add i.MX8MQ i.MX8Q and i.MX95 PCIe PM support

[Richard Zhu]

Add iMX8MQ i.MX8Q and i.MX95 PCIe suspend/resume support.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 36df439d43ae..a8505cd3b53d 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1497,7 +1497,8 @@ static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX8MQ] = {
 		.variant = IMX8MQ,
 		.flags = IMX_PCIE_FLAG_HAS_APP_RESET |
-			 IMX_PCIE_FLAG_HAS_PHY_RESET,
+			 IMX_PCIE_FLAG_HAS_PHY_RESET |
+			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
 		.gpr = "fsl,imx8mq-iomuxc-gpr",
 		.clk_names = imx8mq_clks,
 		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
@@ -1535,13 +1536,15 @@ static const struct imx_pcie_drvdata drvdata[] = {
 	[IMX8Q] = {
 		.variant = IMX8Q,
 		.flags = IMX_PCIE_FLAG_HAS_PHYDRV |
-			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
+			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP |
+			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
 		.clk_names = imx8q_clks,
 		.clks_cnt = ARRAY_SIZE(imx8q_clks),
 	},
 	[IMX95] = {
 		.variant = IMX95,
-		.flags = IMX_PCIE_FLAG_HAS_SERDES,
+		.flags = IMX_PCIE_FLAG_HAS_SERDES |
+			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
 		.clk_names = imx95_clks,
 		.clks_cnt = ARRAY_SIZE(imx95_clks),
 		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
-- 
2.37.1

Re: [PATCH v1 8/9] PCI: imx6: Add i.MX8MQ i.MX8Q and i.MX95 PCIe PM support

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:43AM +0800, Richard Zhu wrote:
> Add iMX8MQ i.MX8Q and i.MX95 PCIe suspend/resume support.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 36df439d43ae..a8505cd3b53d 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1497,7 +1497,8 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX8MQ] = {
>  		.variant = IMX8MQ,
>  		.flags = IMX_PCIE_FLAG_HAS_APP_RESET |
> -			 IMX_PCIE_FLAG_HAS_PHY_RESET,
> +			 IMX_PCIE_FLAG_HAS_PHY_RESET |
> +			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
>  		.gpr = "fsl,imx8mq-iomuxc-gpr",
>  		.clk_names = imx8mq_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8mq_clks),
> @@ -1535,13 +1536,15 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	[IMX8Q] = {
>  		.variant = IMX8Q,
>  		.flags = IMX_PCIE_FLAG_HAS_PHYDRV |
> -			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
> +			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP |
> +			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
>  		.clk_names = imx8q_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8q_clks),
>  	},
>  	[IMX95] = {
>  		.variant = IMX95,
> -		.flags = IMX_PCIE_FLAG_HAS_SERDES,
> +		.flags = IMX_PCIE_FLAG_HAS_SERDES |
> +			 IMX_PCIE_FLAG_SUPPORTS_SUSPEND,
>  		.clk_names = imx95_clks,
>  		.clks_cnt = ARRAY_SIZE(imx95_clks),
>  		.ltssm_off = IMX95_PE0_GEN_CTRL_3,
> --
> 2.37.1
>

[PATCH v1 9/9] arm64: dts: imx95: Add ref clock for i.MX95 PCIe

[Richard Zhu]

Add ref clock for i.MX95 PCIe.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 25 ++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 1bbf9a0468f6..e66be264c2f2 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -221,6 +221,13 @@ core5 {
 		};
 	};
 
+	clk_dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "clk_dummy";
+	};
+
 	clk_ext1: clock-ext1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -1055,6 +1062,14 @@ smmu: iommu@490d0000 {
 			};
 		};
 
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x4>;
+			#clock-cells = <1>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			clocks = <&clk_dummy>;
+		};
+
 		pcie0: pcie@4c300000 {
 			compatible = "fsl,imx95-pcie";
 			reg = <0 0x4c300000 0 0x10000>,
@@ -1082,8 +1097,9 @@ pcie0: pcie@4c300000 {
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
 			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
 					 <&scmi_clk IMX95_CLK_HSIOPLL>,
 					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
@@ -1149,8 +1165,9 @@ pcie1: pcie@4c380000 {
 			clocks = <&scmi_clk IMX95_CLK_HSIO>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL>,
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
-			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
+				 <&hsio_blk_ctl 0>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
 			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
 					 <&scmi_clk IMX95_CLK_HSIOPLL>,
 					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
-- 
2.37.1

Re: [PATCH v1 9/9] arm64: dts: imx95: Add ref clock for i.MX95 PCIe

[Frank Li]

On Tue, Sep 24, 2024 at 11:27:44AM +0800, Richard Zhu wrote:
> Add ref clock for i.MX95 PCIe.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>

below nit.

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/imx95.dtsi | 25 ++++++++++++++++++++----
>  1 file changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index 1bbf9a0468f6..e66be264c2f2 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -221,6 +221,13 @@ core5 {
>  		};
>  	};
>
> +	clk_dummy: clock-dummy {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +		clock-output-names = "clk_dummy";
> +	};
> +
>  	clk_ext1: clock-ext1 {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
> @@ -1055,6 +1062,14 @@ smmu: iommu@490d0000 {
>  			};
>  		};
>
> +		hsio_blk_ctl: syscon@4c0100c0 {
> +			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
> +			reg = <0x0 0x4c0100c0 0x0 0x4>;
> +			#clock-cells = <1>;
> +			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> +			clocks = <&clk_dummy>;

nit: move clocks above power-domains


> +		};
> +
>  		pcie0: pcie@4c300000 {
>  			compatible = "fsl,imx95-pcie";
>  			reg = <0 0x4c300000 0 0x10000>,
> @@ -1082,8 +1097,9 @@ pcie0: pcie@4c300000 {
>  			clocks = <&scmi_clk IMX95_CLK_HSIO>,
>  				 <&scmi_clk IMX95_CLK_HSIOPLL>,
>  				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> -				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> -			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> +				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
> +				 <&hsio_blk_ctl 0>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
>  			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
>  					 <&scmi_clk IMX95_CLK_HSIOPLL>,
>  					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> @@ -1149,8 +1165,9 @@ pcie1: pcie@4c380000 {
>  			clocks = <&scmi_clk IMX95_CLK_HSIO>,
>  				 <&scmi_clk IMX95_CLK_HSIOPLL>,
>  				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
> -				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> -			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
> +				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
> +				 <&hsio_blk_ctl 0>;
> +			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
>  			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
>  					 <&scmi_clk IMX95_CLK_HSIOPLL>,
>  					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
> --
> 2.37.1
>