Re: [PATCH v8 1/4] docs: perf: Add description for Synopsys DesignWare PCIe PMU driver

[Shuai Xue <xueshuai@linux.alibaba.com>]

On 2023/10/19 15:35, Yicong Yang wrote:
> On 2023/10/17 9:32, Shuai Xue wrote:
>> Alibaba's T-Head Yitan 710 SoC includes Synopsys' DesignWare Core PCIe
>> controller which implements which implements PMU for performance and
>> functional debugging to facilitate system maintenance.
> 
> Double "which implements"?

Sorry for the typo, will fix it.

> 
>>
>> Document it to provide guidance on how to use it.
>>
>> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
>> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> 
> Others look good to me.
> 
> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
> 

Thank you for valuable comments :)

Best Regards
Shuai

>> ---
>>  .../admin-guide/perf/dwc_pcie_pmu.rst         | 94 +++++++++++++++++++
>>  Documentation/admin-guide/perf/index.rst      |  1 +
>>  2 files changed, 95 insertions(+)
>>  create mode 100644 Documentation/admin-guide/perf/dwc_pcie_pmu.rst
>>
>> diff --git a/Documentation/admin-guide/perf/dwc_pcie_pmu.rst b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst
>> new file mode 100644
>> index 000000000000..eac1b6f36450
>> --- /dev/null
>> +++ b/Documentation/admin-guide/perf/dwc_pcie_pmu.rst
>> @@ -0,0 +1,94 @@
>> +======================================================================
>> +Synopsys DesignWare Cores (DWC) PCIe Performance Monitoring Unit (PMU)
>> +======================================================================
>> +
>> +DesignWare Cores (DWC) PCIe PMU
>> +===============================
>> +
>> +The PMU is a PCIe configuration space register block provided by each PCIe Root
>> +Port in a Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
>> +injection, and Statistics).
>> +
>> +As the name indicates, the RAS DES capability supports system level
>> +debugging, AER error injection, and collection of statistics. To facilitate
>> +collection of statistics, Synopsys DesignWare Cores PCIe controller
>> +provides the following two features:
>> +
>> +- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
>> +  time spent in each low-power LTSSM state) and
>> +- one 32-bit counter for Event Counting (error and non-error events for
>> +  a specified lane)
>> +
>> +Note: There is no interrupt for counter overflow.
>> +
>> +Time Based Analysis
>> +-------------------
>> +
>> +Using this feature you can obtain information regarding RX/TX data
>> +throughput and time spent in each low-power LTSSM state by the controller.
>> +The PMU measures data in two categories:
>> +
>> +- Group#0: Percentage of time the controller stays in LTSSM states.
>> +- Group#1: Amount of data processed (Units of 16 bytes).
>> +
>> +Lane Event counters
>> +-------------------
>> +
>> +Using this feature you can obtain Error and Non-Error information in
>> +specific lane by the controller. The PMU event is select by:
>> +
>> +- Group i
>> +- Event j within the Group i
>> +- and Lane k
>> +
>> +Some of the event only exist for specific configurations.
>> +
>> +DesignWare Cores (DWC) PCIe PMU Driver
>> +=======================================
>> +
>> +This driver adds PMU devices for each PCIe Root Port named based on the BDF of
>> +the Root Port. For example,
>> +
>> +    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
>> +
>> +the PMU device name for this Root Port is dwc_rootport_3018.
>> +
>> +The DWC PCIe PMU driver registers a perf PMU driver, which provides
>> +description of available events and configuration options in sysfs, see
>> +/sys/bus/event_source/devices/dwc_rootport_{bdf}.
>> +
>> +The "format" directory describes format of the config fields of the
>> +perf_event_attr structure. The "events" directory provides configuration
>> +templates for all documented events.  For example,
>> +"Rx_PCIe_TLP_Data_Payload" is an equivalent of "eventid=0x22,type=0x1".
>> +
>> +The "perf list" command shall list the available events from sysfs, e.g.::
>> +
>> +    $# perf list | grep dwc_rootport
>> +    <...>
>> +    dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/        [Kernel PMU event]
>> +    <...>
>> +    dwc_rootport_3018/rx_memory_read,lane=?/               [Kernel PMU event]
>> +
>> +Time Based Analysis Event Usage
>> +-------------------------------
>> +
>> +Example usage of counting PCIe RX TLP data payload (Units of 16 bytes)::
>> +
>> +    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
>> +
>> +The average RX/TX bandwidth can be calculated using the following formula:
>> +
>> +    PCIe RX Bandwidth = PCIE_RX_DATA * 16B / Measure_Time_Window
>> +    PCIe TX Bandwidth = PCIE_TX_DATA * 16B / Measure_Time_Window
>> +
>> +Lane Event Usage
>> +-------------------------------
>> +
>> +Each lane has the same event set and to avoid generating a list of hundreds
>> +of events, the user need to specify the lane ID explicitly, e.g.::
>> +
>> +    $# perf stat -a -e dwc_rootport_3018/rx_memory_read,lane=4/
>> +
>> +The driver does not support sampling, therefore "perf record" will not
>> +work. Per-task (without "-a") perf sessions are not supported.
>> diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
>> index f60be04e4e33..6bc7739fddb5 100644
>> --- a/Documentation/admin-guide/perf/index.rst
>> +++ b/Documentation/admin-guide/perf/index.rst
>> @@ -19,6 +19,7 @@ Performance monitor support
>>     arm_dsu_pmu
>>     thunderx2-pmu
>>     alibaba_pmu
>> +   dwc_pcie_pmu
>>     nvidia-pmu
>>     meson-ddr-pmu
>>     cxl
>>