[PATCH 2/5] e1000e: fix pci device enable counter balance

[Konstantin Khlebnikov <khlebnikov@openvz.org>]

__e1000_shutdown() calls pci_disable_device() at the end, thus __e1000_resume()
should call pci_enable_device_mem() to keep enable counter in balance.

Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133
("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: e1000-devel@lists.sourceforge.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 2853c11..6bce796 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5598,6 +5598,13 @@ static int __e1000_resume(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 	pci_save_state(pdev);
 
+	err = pci_enable_device_mem(pdev);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Cannot re-enable PCI device after suspend.\n");
+		return err;
+	}
+
 	e1000e_set_interrupt_capability(adapter);
 	if (netif_running(netdev)) {
 		err = e1000_request_irq(adapter);