linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	Yinghai Lu <yinghai@kernel.org>,
	john.ronciak@intel.com, miles.j.penner@intel.com,
	bruce.w.allan@intel.com,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	linux-pci@vger.kernel.org, x86@kernel.org
Subject: Re: [PATCH 4/6] PCI: acpiphp: check for new devices on enabled host
Date: Wed, 26 Jun 2013 12:39:30 +0300 (EEST)	[thread overview]
Message-ID: <20130626093930.DB6B6E0090@blue.fi.intel.com> (raw)
In-Reply-To: <CAHp75Vesp=u+GqBM5RfG-s_BmEoLXZz-zp3+tsHYUsoSNv4XUQ@mail.gmail.com>

Andy Shevchenko wrote:
> On Tue, Jun 25, 2013 at 7:22 PM, Mika Westerberg
> <mika.westerberg@linux.intel.com> wrote:
> 
> > Current acpiphp_check_bridge() implementation is pretty dumb:
> >  - it enables the slot if it's not enabled and the slot status is
> >    ACPI_STA_ALL;
> >  - it disables the slot if it's enabled and slot is not in ACPI_STA_ALL
> >    state.
> >
> > This behavior is not enough to handle Thunderbolt chaining case
> > properly. We need to actually rescan for new devices even if a device
> > has already in the slot.
> >
> > The new implementation disables and stops the slot if it's not in
> > ACPI_STA_ALL state.
> >
> > For ACPI_STA_ALL state we first trim devices which don't respond and
> > look for the ones after that. We do that even if slot already enabled
> > (SLOT_ENABLED).
> 
> Just a couple of nitpicks below.
> 
> >         list_for_each_entry(slot, &bridge->slots, node) {
> > +               struct pci_bus *bus = slot->bridge->pci_bus;
> > +               struct pci_dev *dev, *tmp;
> > +               int retval;
> > +
> > +               mutex_lock(&slot->crit_sect);
> 
> Does it make sense to introduce a helper let's say
> __acpiphp_check_slot() and put there all lines inside this mutex?

No. Why?

> > +               if (get_slot_status(slot) == ACPI_STA_ALL) {
> > +                       /* remove stale devices if any */
> > +                       list_for_each_entry_safe(dev, tmp,
> > +                                       &bus->devices, bus_list) {
> > +                               if (PCI_SLOT(dev->devfn) != slot->device)
> > +                                       continue;
> > +                               pci_trim_stale_devices(dev);
> 
> Perhaps
> 
>  list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
>       if (PCI_SLOT(dev->devfn) == slot->device)
>                 pci_trim_stale_devices(dev);
>  }

Makes sense, thanks.

-- 
 Kirill A. Shutemov

  reply	other threads:[~2013-06-26  9:39 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-25 16:22 [PATCH 0/6] Thunderbolt workarounds take 2 Mika Westerberg
2013-06-25 16:22 ` [PATCH 1/6] PCI: acpiphp: do not check for SLOT_ENABLED in enable_device() Mika Westerberg
2013-06-26 23:28   ` Bjorn Helgaas
2013-06-27 13:25     ` Kirill A. Shutemov
2013-06-28  9:51     ` Kirill A. Shutemov
2013-06-28 17:00       ` Bjorn Helgaas
2013-06-28 18:54         ` Rafael J. Wysocki
2013-07-01  9:32           ` Mika Westerberg
2013-07-01 14:01             ` Rafael J. Wysocki
2013-07-01 18:36               ` Mika Westerberg
2013-07-02  1:29                 ` Rafael J. Wysocki
2013-07-02 16:40                   ` Bjorn Helgaas
2013-07-02 20:29                     ` Rafael J. Wysocki
2013-07-02 20:31                       ` Mika Westerberg
2013-07-02 20:49                         ` Rafael J. Wysocki
2013-06-25 16:22 ` [PATCH 2/6] PCI: acpiphp: enable_device(): rescan even if no new devices on slot Mika Westerberg
2013-06-26 23:37   ` Bjorn Helgaas
2013-06-27 13:02     ` Mika Westerberg
2013-06-27 16:32       ` Mika Westerberg
2013-06-27 16:50         ` Bjorn Helgaas
2013-06-27 16:54         ` Bjorn Helgaas
2013-06-27  1:20   ` Yinghai Lu
2013-06-27 13:04     ` Mika Westerberg
2013-06-25 16:22 ` [PATCH 3/6] PCI: introduce pci_trim_stale_devices() Mika Westerberg
2013-06-25 17:47   ` Andy Shevchenko
2013-06-25 17:56     ` Kirill A. Shutemov
2013-06-28 19:59   ` Rafael J. Wysocki
2013-06-25 16:22 ` [PATCH 4/6] PCI: acpiphp: check for new devices on enabled host Mika Westerberg
2013-06-25 18:04   ` Andy Shevchenko
2013-06-26  9:39     ` Kirill A. Shutemov [this message]
2013-06-27 19:05   ` Yinghai Lu
2013-06-28  9:33     ` Kirill A. Shutemov
2013-06-28 16:22       ` Yinghai Lu
2013-06-28 20:04         ` Rafael J. Wysocki
2013-06-25 16:22 ` [PATCH 5/6] PCI: acpiphp: look _RMV method a bit deeper in the hierarhcy Mika Westerberg
2013-06-25 18:15   ` Andy Shevchenko
2013-06-25 18:31     ` Mika Westerberg
2013-06-25 18:31       ` Andy Shevchenko
2013-06-25 18:51         ` Mika Westerberg
2013-06-25 19:30           ` Andy Shevchenko
2013-07-02 10:44   ` Kirill A. Shutemov
2013-07-02 17:09     ` Bjorn Helgaas
2013-07-02 17:45       ` Kirill A. Shutemov
2013-07-02 20:48         ` Rafael J. Wysocki
2013-07-02 20:40       ` Rafael J. Wysocki
2013-06-25 16:22 ` [PATCH 6/6] x86/PCI: quirk Thunderbolt PCI-to-PCI bridges Mika Westerberg
2013-06-25 21:15   ` Jesse Barnes
2013-06-26 12:17     ` Mika Westerberg
2013-06-26 15:04       ` Greg Kroah-Hartman
2013-06-26 20:59       ` Bjorn Helgaas
2013-06-26 22:15         ` Alex Williamson
2013-06-27 13:09           ` Mika Westerberg
2013-06-26 22:18   ` Bjorn Helgaas
2013-06-26 22:26     ` Yinghai Lu
2013-06-26 22:31       ` Yinghai Lu
2013-06-26 22:44         ` Rafael J. Wysocki
2013-06-26 22:38           ` Yinghai Lu
2013-06-26 22:55         ` Bjorn Helgaas
2013-06-26 23:56           ` Yinghai Lu
2013-06-27 16:00             ` Bjorn Helgaas
2013-06-27 17:27               ` Yinghai Lu
2013-06-27 13:58       ` Mika Westerberg
2013-06-27 13:54     ` Mika Westerberg
2013-06-27 16:27       ` Mika Westerberg
2013-06-27 17:18         ` Yinghai Lu
2013-06-25 23:24 ` [PATCH 0/6] Thunderbolt workarounds take 2 Rafael J. Wysocki
2013-06-26  7:25   ` Mika Westerberg
2013-06-26 12:45     ` Rafael J. Wysocki
2013-06-26 19:48       ` Bjorn Helgaas
2013-06-26 20:01         ` Rafael J. Wysocki
2013-06-26 19:55           ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130626093930.DB6B6E0090@blue.fi.intel.com \
    --to=kirill.shutemov@linux.intel.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=bruce.w.allan@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=john.ronciak@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=miles.j.penner@intel.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).