Re: [PATCH 7/8] pci: Add CircuitCo VENDOR ID and MinnowBoard DEVICE ID

[Bjorn Helgaas <bhelgaas@google.com>]

On Wed, Jun 26, 2013 at 02:16:56PM -0700, Darren Hart wrote:
> On Wed, 2013-06-26 at 13:37 -0600, Bjorn Helgaas wrote:
> > On Wed, Jun 26, 2013 at 11:15 AM, Darren Hart <dvhart@linux.intel.com> wrote:
> > > On Wed, 2013-06-26 at 10:32 -0600, Bjorn Helgaas wrote:
> > 
> > >> +#define PCI_VENDOR_ID_CIRCUITCO              0x1cc8
> > >> +
> > >>  #define PCI_VENDOR_ID_TEKRAM         0x1de1
> > >>  #define PCI_DEVICE_ID_TEKRAM_DC290   0xdc29
> > >
> > >
> > > Thanks Bjorn. When I reuse this Subsystem ID and there is more than one
> > > usage, I should send a patch to pci_ids.h adding it and replace the hex
> > > value in all drivers with the new define. Is that right?
> > 
> > Yeah, that's what I was thinking.
> > 
> > But Peter's comment makes more sense to me now.  The spec refers to
> > that config register as "Subsystem ID," not "Subsystem Device ID," but
> > I was confused because most existing usage treats it as a device ID.
> > For example, the field in struct pci_device_id is named "subdevice,"
> > and all the existing #defines in pci_ids.h are of the form
> > PCI_SUBDEVICE_ID_*.
> > 
> > Device IDs are pretty specific identifiers, so I was thinking that a
> > "sub-device ID" would be even more specific.  Then it would make no
> > sense to have a "sub-device ID" that was as generic as "MINNOWBOARD."
> > But the register is actually *not* a "sub-device ID," and I can see
> > that using the same Subsystem ID for all the devices on a board might
> > make sense.
> > 
> > So I think the name PCI_DEVICE_ID_CIRCUITCO_MINNOWBOARD is a bit of a
> > misnomer, and something like PCI_SUBSYSTEM_CIRCUITCO_MINNOWBOARD would
> > make it more clear that it really isn't sharing the device ID space
> > assigned to CircuitCo.  It would make perfect sense to have a Device
> > ID, e.g., "PCI_DEVICE_ID_CIRCUIT_CO_xxx 0x0001," that has nothing to
> > do with the Subsystem ID 0x0001.
> > 
> > If you want to do something like that (or even keep your original
> > patch), I can put that in my -next branch.  Just let me know.
> > 
> > Bjorn
> 
> 
> I would be happy to change DEVICE to SUBSYSTEM in the the pci_ids.h:
> 
> +#define PCI_VENDOR_ID_CIRCUITCO		0x1cc8
> +#define PCI_SUBSYSTEM_ID_CITCUITCO_MINNOWBOARD	0x0001
> 
> Would you like me to send another patch?

No need.  I'll just apply the following patch.  Obviously your follow-on
pch_gbe patch will need a corresponding change.

Let me know if it needs tweaking, or if you decide I was talking nonsense
above.


commit c2efb42ab6033388f3bbed2dbe0fb76f2402e04a
Author: Darren Hart <dvhart@linux.intel.com>
Date:   Tue Jun 25 20:08:46 2013 -0600

    PCI: Add CircuitCo vendor ID and subsystem ID
    
    Add CircuitCo's newly created VENDOR ID and their first board subsystem
    ID for the MinnowBoard.
    
    [bhelgaas: sort, change DEVICE_ID to SUBSYSTEM_ID]
    Signed-off-by: Darren Hart <dvhart@linux.intel.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c129162..4c7b349 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2476,6 +2476,9 @@
 
 #define PCI_VENDOR_ID_ASMEDIA		0x1b21
 
+#define PCI_VENDOR_ID_CIRCUITCO		0x1cc8
+#define PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD	0x0001
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29