[RFC PATCH 0/7] pci: bus and slot reset interfaces

[RFC PATCH 0/7] pci: bus and slot reset interfaces

[Alex Williamson]

This series adds PCI bus and slot reset interfaces to the already
existing function reset interface.  I need this for two reasons, the
first is that not all devices support function level reset.  Even
some of those that we detect as supporting a PM reset on D3hot->D0
transition actually don't do any reset.  Others have no reset
capability at all.  We currently implement a secondary bus reset
escalation from the function reset path, but only when there is a
single devfn on the bus.  Drivers like vfio can have ownership of
all of the devices on a bus and should therefore have a path to
initiate a secondary bus reset with multiple devices.  This is
particularly required for use of GPUs by userspace, where none of
the predominant GPUs implement a useful function level reset.

The second reason is that even the current function reset escalating
to a secondary bus reset can cause problems with hotplug controllers.
If a root port supports PCIe HP with suprise removal, a bus reset
can trigger a presence detection change, which results in an attempt
to remove the struct device.  By having a slot reset interface, we
can involve the hotplug controllers to allow for a controlled bus
reset and avoid this spurious removal attempt.

Takao-san also needs a PCI bus reset interface to quiesce devices
during kexec.  I believe this interface also provides that.

Why is this an RFC?  I posted this a while back and self-nacked it
because there were issues when hotplug was built as a module.  Now
that we're removing module support for PCI hotplug and pciehp in
particular, I think that problem is resolved, but it needs further
testing.  Coments welcome.  Thanks,

Alex

---

Alex Williamson (7):
      pci: Create pci_reset_bridge_secondary_bus()
      pci: Add hotplug_slot_ops.reset_slot()
      pci: Implement reset_slot for pciehp
      pci: Add slot reset option to pci_dev_reset
      pci: Split out pci_dev lock/unlock and save/restore
      pci: Add slot and bus reset interfaces
      pci: Wake-up devices before save for reset


 drivers/pci/hotplug/pciehp.h      |    1 
 drivers/pci/hotplug/pciehp_core.c |   12 +
 drivers/pci/hotplug/pciehp_hpc.c  |   31 ++++
 drivers/pci/pci.c                 |  320 ++++++++++++++++++++++++++++++++++---
 include/linux/pci.h               |    3 
 include/linux/pci_hotplug.h       |    4 
 6 files changed, 345 insertions(+), 26 deletions(-)

[RFC PATCH 1/7] pci: Create pci_reset_bridge_secondary_bus()

[Alex Williamson]

Move the secondary bus reset code from pci_parent_bus_reset() into its own
function.  Export it as we'll later be calling it from hotplug controllers.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c   |   32 +++++++++++++++++++++++---------
 include/linux/pci.h |    1 +
 2 files changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a599a6b..bfd629c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3276,9 +3276,30 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 	return 0;
 }
 
-static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+/**
+ * pci_reset_bridge_secondary_bus - Reset the secondary bus on a PCI bridge.
+ * @dev: Bridge device
+ *
+ * Use the bridge control register to assert reset on the secondary bus.
+ * Devices on the secondary bus are left in power-on state.
+ */
+void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
+
+	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(100);
+
+	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+	msleep(100);
+}
+EXPORT_SYMBOL_GPL(pci_reset_bridge_secondary_bus);
+
+static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+{
 	struct pci_dev *pdev;
 
 	if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
@@ -3291,14 +3312,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
 	if (probe)
 		return 0;
 
-	pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
-	ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
-	msleep(100);
-
-	ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
-	pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
-	msleep(100);
+	pci_reset_bridge_secondary_bus(dev->bus->self);
 
 	return 0;
 }
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0fd1f15..35c1bc4 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -924,6 +924,7 @@ int pcie_set_mps(struct pci_dev *dev, int mps);
 int __pci_reset_function(struct pci_dev *dev);
 int __pci_reset_function_locked(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
+void pci_reset_bridge_secondary_bus(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);
 int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);

[RFC PATCH 2/7] pci: Add hotplug_slot_ops.reset_slot()

[Alex Williamson]

This optional callback allows htoplug controllers to perform slot
specific resets.  These may be necessary in cases where a normal
secondary bus reset can interact with controller logic and expose
spurious hotplugs.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 include/linux/pci_hotplug.h |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8db71dc..bd32109 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -63,6 +63,9 @@ enum pcie_link_width {
  * @get_adapter_status: Called to get see if an adapter is present in the slot or not.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
+ * @reset_slot: Optional interface to allow override of a bus reset for the
+ *	slot for cases where a secondary bus reset can result in spurious
+ *	hotplug events or where a slot can be reset independent of the bus.
  *
  * The table of function pointers that is passed to the hotplug pci core by a
  * hotplug pci driver.  These functions are called by the hotplug pci core when
@@ -80,6 +83,7 @@ struct hotplug_slot_ops {
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
+	int (*reset_slot)		(struct hotplug_slot *slot, int probe);
 };
 
 /**

[RFC PATCH 3/7] pci: Implement reset_slot for pciehp

[Alex Williamson]

PCIe hotplug has a bus per slot, so we can just use a normal
secondary bus reset.  However, if a slot support surprise removal
then a bus reset can be seen as a presence detection change triggering
a hot-remove followed by a hot-add.  Disable presence detection from
triggering an interrupt or being polled around the bus reset.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/hotplug/pciehp.h      |    1 +
 drivers/pci/hotplug/pciehp_core.c |   12 ++++++++++++
 drivers/pci/hotplug/pciehp_hpc.c  |   31 +++++++++++++++++++++++++++++++
 3 files changed, 44 insertions(+)

diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 7fb3269..541bbe6 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -155,6 +155,7 @@ void pciehp_green_led_off(struct slot *slot);
 void pciehp_green_led_blink(struct slot *slot);
 int pciehp_check_link_status(struct controller *ctrl);
 void pciehp_release_ctrl(struct controller *ctrl);
+int pciehp_reset_slot(struct slot *slot, int probe);
 
 static inline const char *slot_name(struct slot *slot)
 {
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 7d72c5e..f4a18f5 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -69,6 +69,7 @@ static int get_power_status	(struct hotplug_slot *slot, u8 *value);
 static int get_attention_status	(struct hotplug_slot *slot, u8 *value);
 static int get_latch_status	(struct hotplug_slot *slot, u8 *value);
 static int get_adapter_status	(struct hotplug_slot *slot, u8 *value);
+static int reset_slot		(struct hotplug_slot *slot, int probe);
 
 /**
  * release_slot - free up the memory used by a slot
@@ -111,6 +112,7 @@ static int init_slot(struct controller *ctrl)
 	ops->disable_slot = disable_slot;
 	ops->get_power_status = get_power_status;
 	ops->get_adapter_status = get_adapter_status;
+	ops->reset_slot = reset_slot;
 	if (MRL_SENS(ctrl))
 		ops->get_latch_status = get_latch_status;
 	if (ATTN_LED(ctrl)) {
@@ -223,6 +225,16 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
 	return pciehp_get_adapter_status(slot, value);
 }
 
+static int reset_slot(struct hotplug_slot *hotplug_slot, int probe)
+{
+	struct slot *slot = hotplug_slot->private;
+
+	ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
+		 __func__, slot_name(slot));
+
+	return pciehp_reset_slot(slot, probe);
+}
+
 static int pciehp_probe(struct pcie_device *dev)
 {
 	int rc;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index b225573..51f56ef 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -749,6 +749,37 @@ static void pcie_disable_notification(struct controller *ctrl)
 		ctrl_warn(ctrl, "Cannot disable software notification\n");
 }
 
+/*
+ * pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary
+ * bus reset of the bridge, but if the slot supports surprise removal we need
+ * to disable presence detection around the bus reset and clear any spurious
+ * events after.
+ */
+int pciehp_reset_slot(struct slot *slot, int probe)
+{
+	struct controller *ctrl = slot->ctrl;
+
+	if (probe)
+		return 0;
+
+	if (HP_SUPR_RM(ctrl)) {
+		pcie_write_cmd(ctrl, 0, PCI_EXP_SLTCTL_PDCE);
+		if (pciehp_poll_mode)
+			del_timer_sync(&ctrl->poll_timer);
+	}
+
+	pci_reset_bridge_secondary_bus(ctrl->pcie->port);
+
+	if (HP_SUPR_RM(ctrl)) {
+		pciehp_writew(ctrl, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_PDC);
+		pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PDCE, PCI_EXP_SLTCTL_PDCE);
+		if (pciehp_poll_mode)
+			int_poll_timeout(ctrl->poll_timer.data);
+	}
+
+	return 0;
+}
+
 int pcie_init_notification(struct controller *ctrl)
 {
 	if (pciehp_request_irq(ctrl))

[RFC PATCH 4/7] pci: Add slot reset option to pci_dev_reset

[Alex Williamson]

If the hotplug controller provides a way to reset a slot, use that
before a direct parent bus reset.  Like the bus reset option, this is
only available when a single pci_dev occupies the slot.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c |   34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index bfd629c..db90692 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/pm_runtime.h>
+#include <linux/pci_hotplug.h>
 #include <asm-generic/pci-bridge.h>
 #include <asm/setup.h>
 #include "pci.h"
@@ -3317,6 +3318,35 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
 	return 0;
 }
 
+static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe)
+{
+	int rc = -ENOTTY;
+
+	if (!hotplug || !try_module_get(hotplug->ops->owner))
+		return rc;
+
+	if (hotplug->ops->reset_slot)
+		rc = hotplug->ops->reset_slot(hotplug, probe);
+
+	module_put(hotplug->ops->owner);
+
+	return rc;
+}
+
+static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
+{
+	struct pci_dev *pdev;
+
+	if (dev->subordinate || !dev->slot)
+		return -ENOTTY;
+
+	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
+		if (pdev != dev && pdev->slot == dev->slot)
+			return -ENOTTY;
+
+	return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
+}
+
 static int __pci_dev_reset(struct pci_dev *dev, int probe)
 {
 	int rc;
@@ -3339,6 +3369,10 @@ static int __pci_dev_reset(struct pci_dev *dev, int probe)
 	if (rc != -ENOTTY)
 		goto done;
 
+	rc = pci_dev_reset_slot_function(dev, probe);
+	if (rc != -ENOTTY)
+		goto done;
+
 	rc = pci_parent_bus_reset(dev, probe);
 done:
 	return rc;

[RFC PATCH 5/7] pci: Split out pci_dev lock/unlock and save/restore

[Alex Williamson]

Only cosmetic changes to existing paths.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c |   52 +++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 17 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index db90692..f6c757a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3378,22 +3378,46 @@ done:
 	return rc;
 }
 
+static void pci_dev_lock(struct pci_dev *dev)
+{
+	pci_cfg_access_lock(dev);
+	/* block PM suspend, driver probe, etc. */
+	device_lock(&dev->dev);
+}
+
+static void pci_dev_unlock(struct pci_dev *dev)
+{
+	device_unlock(&dev->dev);
+	pci_cfg_access_unlock(dev);
+}
+
+static void pci_dev_save_and_disable(struct pci_dev *dev)
+{
+	pci_save_state(dev);
+	/*
+	 * both INTx and MSI are disabled after the Interrupt Disable bit
+	 * is set and the Bus Master bit is cleared.
+	 */
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+}
+
+static void pci_dev_restore(struct pci_dev *dev)
+{
+	pci_restore_state(dev);
+}
+
 static int pci_dev_reset(struct pci_dev *dev, int probe)
 {
 	int rc;
 
-	if (!probe) {
-		pci_cfg_access_lock(dev);
-		/* block PM suspend, driver probe, etc. */
-		device_lock(&dev->dev);
-	}
+	if (!probe)
+		pci_dev_lock(dev);
 
 	rc = __pci_dev_reset(dev, probe);
 
-	if (!probe) {
-		device_unlock(&dev->dev);
-		pci_cfg_access_unlock(dev);
-	}
+	if (!probe)
+		pci_dev_unlock(dev);
+
 	return rc;
 }
 /**
@@ -3484,17 +3508,11 @@ int pci_reset_function(struct pci_dev *dev)
 	if (rc)
 		return rc;
 
-	pci_save_state(dev);
-
-	/*
-	 * both INTx and MSI are disabled after the Interrupt Disable bit
-	 * is set and the Bus Master bit is cleared.
-	 */
-	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
+	pci_dev_save_and_disable(dev);
 
 	rc = pci_dev_reset(dev, 0);
 
-	pci_restore_state(dev);
+	pci_dev_restore(dev);
 
 	return rc;
 }

[RFC PATCH 6/7] pci: Add slot and bus reset interfaces

[Alex Williamson]

Sometimes pci_reset_function is not sufficient.  We have cases where
devices do not support any kind of reset, but there might be multiple
functions on the bus preventing pci_reset_function from doing a
secondary bus reset.  We also have cases where a device will advertise
that it supports a PM reset, but really does nothing on D3hot->D0
(graphics cards are notorious for this).  These devices often also
have more than one function, so even blacklisting PM reset for them
wouldn't allow a secondary bus reset through pci_reset_function.

If a driver supports multiple devices it should have the ability to
induce a bus reset when it needs to.  This patch provides that ability
through pci_reset_slot and pci_reset_bus.  It's the caller's
responsibility when using these interfaces to understand that all of
the devices in or below the slot (or on or below the bus) will be
reset and therefore should be under control of the caller.  PCI state
of all the affected devices is saved and restored around these resets,
but internal state of all of the affected devices is reset (which
should be the intention).

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c   |  195 +++++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci.h |    2 +
 2 files changed, 197 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f6c757a..91f7bc4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3518,6 +3518,201 @@ int pci_reset_function(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(pci_reset_function);
 
+static void pci_bus_lock(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_lock(dev);
+		if (dev->subordinate)
+			pci_bus_lock(dev->subordinate);
+	}
+}
+
+static void pci_bus_unlock(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_unlock(dev);
+		if (dev->subordinate)
+			pci_bus_unlock(dev->subordinate);
+	}
+}
+
+static void pci_slot_lock(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_lock(dev);
+		if (dev->subordinate)
+			pci_bus_lock(dev->subordinate);
+	}
+}
+
+static void pci_slot_unlock(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_unlock(dev);
+		if (dev->subordinate)
+			pci_bus_unlock(dev->subordinate);
+	}
+}
+
+static void pci_bus_save_and_disable(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_save_and_disable(dev);
+		if (dev->subordinate)
+			pci_bus_save_and_disable(dev->subordinate);
+	}
+}
+
+static void pci_bus_restore(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pci_dev_restore(dev);
+		if (dev->subordinate)
+			pci_bus_restore(dev->subordinate);
+	}
+}
+
+static void pci_slot_save_and_disable(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_save_and_disable(dev);
+		if (dev->subordinate)
+			pci_bus_save_and_disable(dev->subordinate);
+	}
+}
+
+static void pci_slot_restore(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		pci_dev_restore(dev);
+		if (dev->subordinate)
+			pci_bus_restore(dev->subordinate);
+	}
+}
+
+static int pci_slot_reset(struct pci_slot *slot, int probe)
+{
+	int rc;
+
+	if (!slot)
+		return -ENOTTY;
+
+	if (!probe)
+		pci_slot_lock(slot);
+
+	might_sleep();
+
+	rc = pci_reset_hotplug_slot(slot->hotplug, probe);
+
+	if (!probe)
+		pci_slot_unlock(slot);
+
+	return rc;
+}
+
+/**
+ * pci_reset_slot - reset a PCI slot
+ * @slot: PCI slot to reset
+ *
+ * A PCI bus may host multiple slots, each slot may support a reset mechanism
+ * independent of other slots.  For instance, some slots may support slot power
+ * control.  In the case of a 1:1 bus to slot architecture, this function may
+ * wrap the bus reset to avoid spurious slot related events such as hotplug.
+ * Generally a slot reset should be attempted before a bus reset.  All of the
+ * function of the slot and any subordinate buses behind the slot are reset
+ * through this function.  PCI config space of all devices in the slot and
+ * behind the slot is saved before and restored after reset.
+ *
+ * Return 0 on success, non-zero on error.
+ */
+int pci_reset_slot(struct pci_slot *slot)
+{
+	int rc;
+
+	rc = pci_slot_reset(slot, 1);
+	if (rc)
+		return rc;
+
+	pci_slot_save_and_disable(slot);
+
+	rc = pci_slot_reset(slot, 0);
+
+	pci_slot_restore(slot);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pci_reset_slot);
+
+static int pci_bus_reset(struct pci_bus *bus, int probe)
+{
+	if (!bus->self)
+		return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	pci_bus_lock(bus);
+
+	might_sleep();
+
+	pci_reset_bridge_secondary_bus(bus->self);
+
+	pci_bus_unlock(bus);
+
+	return 0;
+}
+
+/**
+ * pci_reset_bus - reset a PCI bus
+ * @bus: top level PCI bus to reset
+ *
+ * Do a bus reset on the given bus and any subordinate buses, saving
+ * and restoring state of all devices.
+ *
+ * Return 0 on success, non-zero on error.
+ */
+int pci_reset_bus(struct pci_bus *bus)
+{
+	int rc;
+
+	rc = pci_bus_reset(bus, 1);
+	if (rc)
+		return rc;
+
+	pci_bus_save_and_disable(bus);
+
+	rc = pci_bus_reset(bus, 0);
+
+	pci_bus_restore(bus);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(pci_reset_bus);
+
 /**
  * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
  * @dev: PCI device to query
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 35c1bc4..1a8fd34 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -924,6 +924,8 @@ int pcie_set_mps(struct pci_dev *dev, int mps);
 int __pci_reset_function(struct pci_dev *dev);
 int __pci_reset_function_locked(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
+int pci_reset_slot(struct pci_slot *slot);
+int pci_reset_bus(struct pci_bus *bus);
 void pci_reset_bridge_secondary_bus(struct pci_dev *dev);
 void pci_update_resource(struct pci_dev *dev, int resno);
 int __must_check pci_assign_resource(struct pci_dev *dev, int i);

[RFC PATCH 7/7] pci: Wake-up devices before save for reset

[Alex Williamson]

Devices come out of reset in D0.  Restoring a device to a different
post-reset state takes more smarts than our simple config space
restore, which can leave devices in an inconsistent state.  For
example, if a device is reset in D3, but the restore doesn't
successfully return the device to D3, then the actual state of the
device and dev->current_state are contradictory.  Put everything
in D0 going into the reset, then we don't need to do anything
special on the way out.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 91f7bc4..3e71887 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3393,6 +3393,13 @@ static void pci_dev_unlock(struct pci_dev *dev)
 
 static void pci_dev_save_and_disable(struct pci_dev *dev)
 {
+	/*
+	 * Wake-up device prior to save.  PM registers default to D0 after
+	 * reset and a simple register restore doesn't reliably return
+	 * to a non-D0 state anyway.
+	 */
+	pci_set_power_state(dev, PCI_D0);
+
 	pci_save_state(dev);
 	/*
 	 * both INTx and MSI are disabled after the Interrupt Disable bit