Re: [PATCH v7 0/2] Add PCIe support for i.MX6q

[Marek Vasut <marex@denx.de>]

Hi Tim,

> On Thu, Oct 10, 2013 at 3:40 AM, Zhu Richard-R65037
> 
> <r65037@freescale.com> wrote:
> >      host=10.192.242.95, domain=ap.freescale.net, nis-domain=(none)
> >      bootserver=0.0.0.0, rootserver=10.192.225.216, rootpath=
> >      nameserver0=10.192.130.201, nameserver1=10.211.0.3,
> >      nameserver2=10.196.51.200
> > 
> > ALSA device list:
> >   #0: wm8962-audio
> >   #1: imx-hdmi-soc
> > 
> > VFS: Mounted root (nfs filesystem) on device 0:11.
> > devtmpfs: mounted
> > Freeing unused kernel memory: 300K (80c29000 - 80c74000)
> > Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b 
> >  <--System panic here sometimes. :(
> 
> Marek,
> 
> This is where an imprecise abort is triggered - refer to my comments
> regarding the abort handler at
> http://thread.gmane.org/gmane.linux.drivers.devicetree/44659/focus=46171
> - you should disable the bumping of the PC and/or the handler.

Good point.

> Did this patch ever get applied and if so what git tree?  I would like
> to continue testing it as well with the boards I have that have a
> switch.

V7 has the handler, yes.

http://patchwork.ozlabs.org/patch/278088/
http://patchwork.ozlabs.org/patch/278087/

You will also need to dig out the arm-specific portion from v6 3/3 so that the 
PCIe would probe:

http://patchwork.ozlabs.org/patch/275169/

And apply the clock patch:

http://patchwork.ozlabs.org/patch/275167/

Do you have any luck working with the bridge? I have this resource collision as 
seen in this thread.

Best regards,
Marek Vasut