Re: mlx4_core probe error after applying Yinghai's patch

[Wei Yang <weiyang@linux.vnet.ibm.com>]

On Tue, Jan 14, 2014 at 10:50:31AM +0200, Jack Morgenstein wrote:
>On Tue, 14 Jan 2014 14:22:15 +0800
>Wei Yang <weiyang@linux.vnet.ibm.com> wrote:
>
>> Error log:
>>   mlx4_core 0003:05:00.0: Multiple PFs not yet supported.  Skipping
>> PF. mlx4_core: probe of 0003:05:00.0 failed with error -22
>
>1. Please include the full error log starting from host bootup and
>driver start

Will provide one later. 

>
>2. What FW is loaded on the card?

$ mst status
MST modules:
------------
    MST PCI module loaded
    MST PCI configuration module loaded

MST devices:
------------
/dev/mst/mt4099_pciconf0         - PCI configuration cycles access.
                                   domain:bus:dev.fn=0003:05:00.0 addr.reg=88 data.reg=92
                                   Chip revision is: 01
/dev/mst/mt4099_pci_cr0          - PCI direct access.
                                   domain:bus:dev.fn=0003:05:00.0 bar=0x3d0508d300000 size=0x100000
                                   Chip revision is: 01


# mlxburn -d  /dev/mst/mt4099_pci_cr0 -fwver
-I- FW Version: 2.30.3200


>
>3. Please provide output of "lspci -vv -nn" for the Mellanox device(s)

$lspci | grep Mel
0003:05:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3]
$lspci -s 0003:05:00.0 -n
0003:05:00.0 0280: 15b3:1003

The output with -vvv is attached in the first mail.

-- 
Richard Yang
Help you, Help me