From: Sarah Sharp <sarah.a.sharp@linux.intel.com>
To: Alexander Gordeev <agordeev@redhat.com>
Cc: linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-pci@vger.kernel.org, "Nyman,
Mathias" <mathias.nyman@intel.com>,
Dan Williams <dan.j.williams@intel.com>
Subject: Re: [PATCH v2 RESEND 4/4] xhci: Use pci_enable_msix_exact() instead of pci_enable_msix()
Date: Thu, 6 Mar 2014 13:56:46 -0800 [thread overview]
Message-ID: <20140306215646.GA23294@xanatos> (raw)
In-Reply-To: <606a52afdccf627b6273379b21daffc460b9559a.1394128952.git.agordeev@redhat.com>
On Thu, Mar 06, 2014 at 09:11:24PM +0100, Alexander Gordeev wrote:
> As result of deprecation of MSI-X/MSI enablement functions
> pci_enable_msix() and pci_enable_msi_block() all drivers
> using these two interfaces need to be updated to use the
> new pci_enable_msi_range() or pci_enable_msi_exact()
> and pci_enable_msix_range() or pci_enable_msix_exact()
> interfaces.
>
> This update also cleans up a bit xhci_setup_msi() and
> xhci_setup_msix() returning of success.
What do you mean by this sentence? Are you fixing some bug in those two
functions, or just cleaning up how they look? Either way, this should
really be two patches.
Sarah Sharp
> Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-pci@vger.kernel.org
> ---
> drivers/usb/host/xhci.c | 7 ++++---
> 1 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 6fe577d..dc7cfb5 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -232,9 +232,10 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
> "disable MSI interrupt");
> pci_disable_msi(pdev);
> + return ret;
> }
>
> - return ret;
> + return 0;
> }
>
> /*
> @@ -291,7 +292,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
> xhci->msix_entries[i].vector = 0;
> }
>
> - ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count);
> + ret = pci_enable_msix_exact(pdev, xhci->msix_entries, xhci->msix_count);
> if (ret) {
> xhci_dbg_trace(xhci, trace_xhci_dbg_init,
> "Failed to enable MSI-X");
> @@ -307,7 +308,7 @@ static int xhci_setup_msix(struct xhci_hcd *xhci)
> }
>
> hcd->msix_enabled = 1;
> - return ret;
> + return 0;
>
> disable_msix:
> xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable MSI-X interrupt");
> --
> 1.7.7.6
>
next prev parent reply other threads:[~2014-03-06 21:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1394128952.git.agordeev@redhat.com>
2014-03-06 20:11 ` [PATCH v2 RESEND 1/4] ioat: Use pci_enable_msix_exact() instead of pci_enable_msix() Alexander Gordeev
2014-03-06 21:09 ` Dan Williams
2014-03-06 21:43 ` Alexander Gordeev
2014-03-06 21:50 ` Dan Williams
2014-03-07 7:49 ` [PATCH v2] " Alexander Gordeev
2014-04-21 13:36 ` Alexander Gordeev
2014-08-25 16:35 ` Alexander Gordeev
2014-08-25 16:31 ` Dan Williams
2014-03-06 20:11 ` [PATCH v2 RESEND 2/4] portdrv: " Alexander Gordeev
2014-03-13 3:56 ` Bjorn Helgaas
2014-04-14 16:18 ` Alexander Gordeev
2014-03-06 20:11 ` [PATCH v2 RESEND 3/4] tsi721: " Alexander Gordeev
2014-03-07 13:35 ` Bounine, Alexandre
2014-04-21 13:28 ` Alexander Gordeev
2014-03-06 20:11 ` [PATCH v2 RESEND 4/4] xhci: " Alexander Gordeev
2014-03-06 21:56 ` Sarah Sharp [this message]
2014-03-07 7:46 ` [PATCH v2 1/2] xhci: Cleanup xhci_setup_msi() and xhci_setup_msix() Alexander Gordeev
2014-03-07 7:48 ` [PATCH v2 2/2] xhci: Use pci_enable_msix_exact() instead of pci_enable_msix() Alexander Gordeev
2014-03-25 14:27 ` [PATCH v2 RESEND 4/4] " Alexander Gordeev
2014-04-02 11:41 ` Alexander Gordeev
2014-04-02 14:05 ` Mathias Nyman
2014-04-02 15:20 ` Alexander Gordeev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140306215646.GA23294@xanatos \
--to=sarah.a.sharp@linux.intel.com \
--cc=agordeev@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).