linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Williamson <alex.williamson@redhat.com>
To: iommu@lists.linux-foundation.org
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alex Williamson <alex.williamson@redhat.com>,
	Joerg Roedel <joro@8bytes.org>
Subject: [PATCH 3/7] iommu/amd: Use iommu_group_get_for_dev()
Date: Thu, 03 Jul 2014 09:51:30 -0600	[thread overview]
Message-ID: <20140703155130.8112.99665.stgit@gimli.home> (raw)
In-Reply-To: <20140703154428.8112.97562.stgit@gimli.home>

The common iommu_group_get_for_dev() allows us to greatly simplify
our group lookup for a new device.  Also, since we insert IVRS
aliases into the PCI DMA alias quirks, we should alway come up with
the same results as the existing code.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
---

 drivers/iommu/amd_iommu.c       |  164 +--------------------------------------
 drivers/iommu/amd_iommu_types.h |    1 
 2 files changed, 5 insertions(+), 160 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 25d7571..2e03c17 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -46,7 +46,6 @@
 #include "amd_iommu_proto.h"
 #include "amd_iommu_types.h"
 #include "irq_remapping.h"
-#include "pci.h"
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
@@ -133,9 +132,6 @@ static void free_dev_data(struct iommu_dev_data *dev_data)
 	list_del(&dev_data->dev_data_list);
 	spin_unlock_irqrestore(&dev_data_list_lock, flags);
 
-	if (dev_data->group)
-		iommu_group_put(dev_data->group);
-
 	kfree(dev_data);
 }
 
@@ -264,167 +260,17 @@ static bool check_device(struct device *dev)
 	return true;
 }
 
-static struct pci_bus *find_hosted_bus(struct pci_bus *bus)
-{
-	while (!bus->self) {
-		if (!pci_is_root_bus(bus))
-			bus = bus->parent;
-		else
-			return ERR_PTR(-ENODEV);
-	}
-
-	return bus;
-}
-
-#define REQ_ACS_FLAGS	(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF)
-
-static struct pci_dev *get_isolation_root(struct pci_dev *pdev)
-{
-	struct pci_dev *dma_pdev = pdev;
-
-	/* Account for quirked devices */
-	swap_pci_ref(&dma_pdev, pci_get_dma_source(dma_pdev));
-
-	/*
-	 * If it's a multifunction device that does not support our
-	 * required ACS flags, add to the same group as lowest numbered
-	 * function that also does not suport the required ACS flags.
-	 */
-	if (dma_pdev->multifunction &&
-	    !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS)) {
-		u8 i, slot = PCI_SLOT(dma_pdev->devfn);
-
-		for (i = 0; i < 8; i++) {
-			struct pci_dev *tmp;
-
-			tmp = pci_get_slot(dma_pdev->bus, PCI_DEVFN(slot, i));
-			if (!tmp)
-				continue;
-
-			if (!pci_acs_enabled(tmp, REQ_ACS_FLAGS)) {
-				swap_pci_ref(&dma_pdev, tmp);
-				break;
-			}
-			pci_dev_put(tmp);
-		}
-	}
-
-	/*
-	 * Devices on the root bus go through the iommu.  If that's not us,
-	 * find the next upstream device and test ACS up to the root bus.
-	 * Finding the next device may require skipping virtual buses.
-	 */
-	while (!pci_is_root_bus(dma_pdev->bus)) {
-		struct pci_bus *bus = find_hosted_bus(dma_pdev->bus);
-		if (IS_ERR(bus))
-			break;
-
-		if (pci_acs_path_enabled(bus->self, NULL, REQ_ACS_FLAGS))
-			break;
-
-		swap_pci_ref(&dma_pdev, pci_dev_get(bus->self));
-	}
-
-	return dma_pdev;
-}
-
-static int use_pdev_iommu_group(struct pci_dev *pdev, struct device *dev)
-{
-	struct iommu_group *group = iommu_group_get(&pdev->dev);
-	int ret;
-
-	if (!group) {
-		group = iommu_group_alloc();
-		if (IS_ERR(group))
-			return PTR_ERR(group);
-
-		WARN_ON(&pdev->dev != dev);
-	}
-
-	ret = iommu_group_add_device(group, dev);
-	iommu_group_put(group);
-	return ret;
-}
-
-static int use_dev_data_iommu_group(struct iommu_dev_data *dev_data,
-				    struct device *dev)
-{
-	if (!dev_data->group) {
-		struct iommu_group *group = iommu_group_alloc();
-		if (IS_ERR(group))
-			return PTR_ERR(group);
-
-		dev_data->group = group;
-	}
-
-	return iommu_group_add_device(dev_data->group, dev);
-}
-
 static int init_iommu_group(struct device *dev)
 {
-	struct iommu_dev_data *dev_data;
 	struct iommu_group *group;
-	struct pci_dev *dma_pdev;
-	int ret;
 
-	group = iommu_group_get(dev);
-	if (group) {
-		iommu_group_put(group);
-		return 0;
-	}
+	group = iommu_group_get_for_dev(dev);
 
-	dev_data = find_dev_data(get_device_id(dev));
-	if (!dev_data)
-		return -ENOMEM;
-
-	if (dev_data->alias_data) {
-		u16 alias;
-		struct pci_bus *bus;
-
-		if (dev_data->alias_data->group)
-			goto use_group;
+	if (IS_ERR(group))
+		return PTR_ERR(group);
 
-		/*
-		 * If the alias device exists, it's effectively just a first
-		 * level quirk for finding the DMA source.
-		 */
-		alias = amd_iommu_alias_table[dev_data->devid];
-		dma_pdev = pci_get_bus_and_slot(alias >> 8, alias & 0xff);
-		if (dma_pdev) {
-			dma_pdev = get_isolation_root(dma_pdev);
-			goto use_pdev;
-		}
-
-		/*
-		 * If the alias is virtual, try to find a parent device
-		 * and test whether the IOMMU group is actualy rooted above
-		 * the alias.  Be careful to also test the parent device if
-		 * we think the alias is the root of the group.
-		 */
-		bus = pci_find_bus(0, alias >> 8);
-		if (!bus)
-			goto use_group;
-
-		bus = find_hosted_bus(bus);
-		if (IS_ERR(bus) || !bus->self)
-			goto use_group;
-
-		dma_pdev = get_isolation_root(pci_dev_get(bus->self));
-		if (dma_pdev != bus->self || (dma_pdev->multifunction &&
-		    !pci_acs_enabled(dma_pdev, REQ_ACS_FLAGS)))
-			goto use_pdev;
-
-		pci_dev_put(dma_pdev);
-		goto use_group;
-	}
-
-	dma_pdev = get_isolation_root(pci_dev_get(to_pci_dev(dev)));
-use_pdev:
-	ret = use_pdev_iommu_group(dma_pdev, dev);
-	pci_dev_put(dma_pdev);
-	return ret;
-use_group:
-	return use_dev_data_iommu_group(dev_data->alias_data, dev);
+	iommu_group_put(group);
+	return 0;
 }
 
 static int __last_alias(struct pci_dev *pdev, u16 alias, void *data)
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index f1a5abf..7277a20 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -432,7 +432,6 @@ struct iommu_dev_data {
 	struct iommu_dev_data *alias_data;/* The alias dev_data */
 	struct protection_domain *domain; /* Domain the device is bound to */
 	atomic_t bind;			  /* Domain attach reference count */
-	struct iommu_group *group;	  /* IOMMU group for virtual aliases */
 	u16 devid;			  /* PCI Device ID */
 	bool iommu_v2;			  /* Device can make use of IOMMUv2 */
 	bool passthrough;		  /* Default for device is pt_domain */


  parent reply	other threads:[~2014-07-03 15:51 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-03 15:51 [PATCH 0/7] iommu: Fix DMA alias problems Alex Williamson
2014-07-03 15:51 ` [PATCH 1/7] iommu: Create central IOMMU group lookup/creation interface Alex Williamson
2014-07-03 15:51 ` [PATCH 2/7] iommu/amd: Update to use PCI DMA aliases Alex Williamson
2014-07-03 15:51 ` Alex Williamson [this message]
2014-07-03 15:51 ` [PATCH 4/7] iommu/intel: Use iommu_group_get_for_dev() Alex Williamson
2014-07-03 15:51 ` [PATCH 5/7] iommu/intel: Update to use PCI DMA aliases Alex Williamson
2014-07-03 15:51 ` [PATCH 6/7] iommu/fsl: Use iommu_group_get_for_dev() for IOMMU groups Alex Williamson
2014-07-03 15:51 ` [PATCH 7/7] iommu: Remove pci.h Alex Williamson
2014-07-04 10:36 ` [PATCH 0/7] iommu: Fix DMA alias problems Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140703155130.8112.99665.stgit@gimli.home \
    --to=alex.williamson@redhat.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).