From: Bjorn Helgaas <bhelgaas@google.com>
To: matt@masarand.com
Cc: linux-pci@vger.kernel.org
Subject: Re: [PATCH 06/18] Delayed alpha setup of PCI IRQs to bus scan time
Date: Tue, 14 Oct 2014 12:27:22 -0600 [thread overview]
Message-ID: <20141014182722.GF10125@google.com> (raw)
In-Reply-To: <1412222866-21068-7-git-send-email-matt@masarand.com>
On Thu, Oct 02, 2014 at 05:07:34AM +0100, matt@masarand.com wrote:
> From: Matthew Minter <matt@masarand.com>
>
> PCI IRQ initialisation is currently run during the boot code on alpha,
> this has the issue that firstly an extra pass over the PCI bus is
> required and second hot-plugged devices which are added after boot have
> no way to be assigned an IRQ. This patch set fixes this by defering the
> assignment of PCI IRQs untill device enable time which should solve
> both of these issues.
>
> Signed-off-by: Matthew Minter <matt@masarand.com>
>
> ---
> arch/alpha/kernel/pci.c | 16 ++++++++++------
> arch/alpha/kernel/sys_nautilus.c | 1 -
> 2 files changed, 10 insertions(+), 7 deletions(-)
>
> diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
> index 076c35c..338537c 100644
> --- a/arch/alpha/kernel/pci.c
> +++ b/arch/alpha/kernel/pci.c
> @@ -28,7 +28,7 @@
>
>
> /*
> - * Some string constants used by the various core logics.
> + * Some string constants used by the various core logics.
> */
>
> const char *const pci_io_names[] = {
> @@ -247,7 +247,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
> if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
> (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
> pci_read_bridge_bases(bus);
> - }
> + }
>
> list_for_each_entry(dev, &bus->devices, bus_list) {
> pdev_save_srm_config(dev);
> @@ -338,7 +338,7 @@ common_init_pci(void)
> hose->need_domain_info = need_domain_info;
> next_busno = bus->busn_res.end + 1;
> /* Don't allow 8-bit bus number overflow inside the hose -
> - reserve some space for bridges. */
> + reserve some space for bridges. */
Extraneous whitespace changes above.
> if (next_busno > 224) {
> next_busno = 0;
> need_domain_info = 1;
> @@ -346,11 +346,15 @@ common_init_pci(void)
> }
>
> pcibios_claim_console_setup();
> -
> pci_assign_unassigned_resources();
> - pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
> }
>
> +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> +{
> + bridge->swizzle_irq = alpha_mv.pci_swizzle;
> + bridge->map_irq = alpha_mv.pci_map_irq;
> + return 0;
> +}
>
> struct pci_controller * __init
> alloc_pci_controller(void)
> @@ -387,7 +391,7 @@ sys_pciconfig_iobase(long which, unsigned long bus, unsigned long dfn)
>
> /* from hose or from bus.devfn */
> if (which & IOBASE_FROM_HOSE) {
> - for(hose = hose_head; hose; hose = hose->next)
> + for(hose = hose_head; hose; hose = hose->next)
Extraneous whitespace change. If you fix this in a separate patch, also
add a space after "for".
> if (hose->index == bus) break;
> if (!hose) return -ENODEV;
> } else {
> diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
> index 837c0fa..7fb4d51 100644
> --- a/arch/alpha/kernel/sys_nautilus.c
> +++ b/arch/alpha/kernel/sys_nautilus.c
> @@ -252,7 +252,6 @@ nautilus_init_pci(void)
> /* pci_common_swizzle() relies on bus->self being NULL
> for the root bus, so just clear it. */
> bus->self = NULL;
> - pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
> }
>
> /*
> --
> 2.1.0
>
next prev parent reply other threads:[~2014-10-14 18:27 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-02 4:07 [PATCH V3] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging matt
2014-10-02 4:07 ` [PATCH 01/18] Added way to register deferred PCI IRQ assignment handlers matt
2014-10-02 10:33 ` Liviu Dudau
2014-10-14 23:25 ` Bjorn Helgaas
2014-10-14 17:15 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 02/18] Delayed x86 setup of PCI IRQs to bus scan time matt
2014-10-02 10:51 ` Liviu Dudau
2014-10-14 18:11 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 03/18] Delayed arm " matt
2014-10-14 18:14 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 04/18] Delayed powerpc " matt
2014-10-14 18:20 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 05/18] Delayed sh " matt
2014-10-14 18:25 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 06/18] Delayed alpha " matt
2014-10-14 18:27 ` Bjorn Helgaas [this message]
2014-10-02 4:07 ` [PATCH 07/18] Delayed cris " matt
2014-10-14 18:34 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 08/18] Delayed frv " matt
2014-10-14 18:37 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 09/18] Delayed m68k " matt
2014-10-14 18:38 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 10/18] Delayed microblaze " matt
2014-10-02 4:07 ` [PATCH 11/18] Delayed mips " matt
2014-10-02 4:07 ` [PATCH 12/18] Delayed mn10300 " matt
2014-10-14 18:46 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 13/18] Delayed sparc " matt
2014-10-14 18:51 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 14/18] Delayed tile " matt
2014-10-02 4:07 ` [PATCH 15/18] Delayed unicore32 " matt
2014-10-02 4:07 ` [PATCH 16/18] Disabled bus scan time PCI IRQ assignment on ia64 matt
2014-10-14 18:53 ` Bjorn Helgaas
2014-10-02 4:07 ` [PATCH 17/18] Disabled bus scan time PCI IRQ assignment on parisc matt
2014-10-02 4:07 ` [PATCH 18/18] Disabled bus scan time PCI IRQ assignment on s390 matt
2015-01-31 14:56 ` [PATCH V3] Delay allocation of PCI device IRQs from boot time until bus scan time to fix PCI hotplugging Bjorn Helgaas
-- strict thread matches above, loose matches on Subject: below --
2014-10-02 3:50 matt
2014-10-02 3:50 ` [PATCH 06/18] Delayed alpha setup of PCI IRQs to bus scan time matt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141014182722.GF10125@google.com \
--to=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=matt@masarand.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).