linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: benh@au1.ibm.com, gwshan@linux.vnet.ibm.com,
	linux-pci@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH V11 14/17] powerpc/powernv: Shift VF resource with an offset
Date: Fri, 30 Jan 2015 17:08:03 -0600	[thread overview]
Message-ID: <20150130230803.GA6795@google.com> (raw)
In-Reply-To: <1421288887-7765-15-git-send-email-weiyang@linux.vnet.ibm.com>

On Thu, Jan 15, 2015 at 10:28:04AM +0800, Wei Yang wrote:
> On PowrNV platform, resource position in M64 implies the PE# the resource
> belongs to. In some particular case, adjustment of a resource is necessary
> to locate it to a correct position in M64.
> 
> This patch introduces a function to shift the 'real' PF IOV BAR address
> according to an offset.
> 
> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c |   31 +++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 8bad2b0..62bb2eb 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -14,6 +14,7 @@
>  #include <linux/kernel.h>
>  #include <linux/pci.h>
>  #include <linux/crash_dump.h>
> +#include <linux/pci_regs.h>
>  #include <linux/debugfs.h>
>  #include <linux/delay.h>
>  #include <linux/string.h>
> @@ -749,6 +750,36 @@ static unsigned int pnv_ioda_dma_weight(struct pci_dev *dev)
>  	return 10;
>  }
>  
> +#ifdef CONFIG_PCI_IOV
> +static void pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
> +{
> +	struct pci_dn *pdn = pci_get_pdn(dev);
> +	int i;
> +	struct resource *res;
> +	resource_size_t size;
> +
> +	if (!dev->is_physfn)
> +		return;
> +
> +	for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) {
> +		res = &dev->resource[i];
> +		if (!res->flags || !res->parent)
> +			continue;
> +
> +		if (!pnv_pci_is_mem_pref_64(res->flags))
> +			continue;
> +
> +		dev_info(&dev->dev, " Shifting VF BAR %pR to\n", res);
> +		size = pci_iov_resource_size(dev, i);
> +		res->start += size*offset;

It seems like you should adjust res->end, too.  Am I missing something?

And I'm not sure it's safe to move the resource here, because if we move it
outside the bounds of the parent, we'll corrupt the resource tree.  Maybe
we're safe for some reason here, but it requires more analysis than I've
done to prove it.

> +
> +		dev_info(&dev->dev, "                 %pR\n", res);
> +		pci_update_resource(dev, i);
> +	}
> +	pdn->max_vfs -= offset;
> +}
> +#endif /* CONFIG_PCI_IOV */
> +
>  #if 0
>  static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
>  {
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2015-01-30 23:08 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-22  5:54 [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2014-12-22  5:54 ` [PATCH V10 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2014-12-22  5:54 ` [PATCH V10 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2014-12-22  5:54 ` [PATCH V10 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2014-12-22  5:54 ` [PATCH V10 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2014-12-22  5:54 ` [PATCH V10 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2014-12-22  5:54 ` [PATCH V10 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2014-12-22  5:54 ` [PATCH V10 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2014-12-22  5:54 ` [PATCH V10 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2014-12-22  5:54 ` [PATCH V10 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2014-12-22  5:54 ` [PATCH V10 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2014-12-22  5:54 ` [PATCH V10 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2014-12-22  5:54 ` [PATCH V10 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2014-12-22  5:54 ` [PATCH V10 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2014-12-22  5:54 ` [PATCH V10 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2014-12-22  5:54 ` [PATCH V10 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2014-12-22  5:54 ` [PATCH V10 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2014-12-22  5:54 ` [PATCH V10 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2014-12-22  6:05 ` [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2015-01-13 18:05   ` Bjorn Helgaas
2015-01-15  2:27     ` [PATCH V11 " Wei Yang
2015-01-15  2:27       ` [PATCH V11 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2015-02-20 23:09         ` Bjorn Helgaas
2015-03-02  6:05           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2015-02-10  0:26         ` Benjamin Herrenschmidt
2015-02-10  1:35           ` Wei Yang
2015-02-10  2:13             ` Benjamin Herrenschmidt
2015-02-10  6:18               ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2015-02-10  0:32         ` Benjamin Herrenschmidt
2015-02-10  1:44           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2015-01-15  2:27       ` [PATCH V11 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2015-01-15  2:27       ` [PATCH V11 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2015-02-04 23:44         ` Bjorn Helgaas
2015-02-10  1:02           ` Benjamin Herrenschmidt
2015-02-20  0:56             ` Bjorn Helgaas
2015-02-20  2:41               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2015-02-10  0:36         ` Benjamin Herrenschmidt
2015-02-10  1:51           ` Wei Yang
2015-02-10  2:14             ` Benjamin Herrenschmidt
2015-02-10  6:25               ` Wei Yang
2015-02-10  8:14                 ` Benjamin Herrenschmidt
2015-02-20 23:47                   ` Bjorn Helgaas
2015-03-02  6:09                     ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2015-02-20 23:19         ` Bjorn Helgaas
2015-02-23  0:13           ` Gavin Shan
2015-02-24  8:13             ` Bjorn Helgaas
2015-02-24  8:25               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2015-01-15  2:28       ` [PATCH V11 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2015-01-15  2:28       ` [PATCH V11 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2015-01-15  2:28       ` [PATCH V11 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 23:08           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 22:45           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-01-30 23:08         ` Bjorn Helgaas [this message]
2015-02-03  1:30           ` Wei Yang
2015-02-03  7:01           ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Wei Yang
2015-02-04  0:19             ` Bjorn Helgaas
2015-02-04  3:34               ` Wei Yang
2015-02-04 14:19                 ` Bjorn Helgaas
2015-02-04 15:20                   ` Wei Yang
2015-02-04 16:08                   ` [PATCH] pci/iov: fix memory leak introduced in "PCI: Store individual VF BAR size in struct pci_sriov" Wei Yang
2015-02-04 16:28                     ` Bjorn Helgaas
2015-02-04 20:53                 ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Bjorn Helgaas
2015-02-05  3:01                   ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2015-01-15  2:28       ` [PATCH V11 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-04 22:05         ` Bjorn Helgaas
2015-02-05  0:07           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-02-04 23:44       ` [PATCH V11 00/17] Enable SRIOV on Power8 Bjorn Helgaas
2015-02-05  0:13         ` Wei Yang
2015-02-05  6:34         ` [PATCH 0/3] Code adjustment on pci/virtualization Wei Yang
2015-02-05  6:34           ` [PATCH 1/3] fix on Store individual VF BAR size in struct pci_sriov Wei Yang
2015-02-05  6:34           ` [PATCH 2/3] fix Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-05  6:34           ` [PATCH 3/3] remove the unused end in pnv_pci_vf_resource_shift() Wei Yang
2015-02-10  0:25         ` [PATCH V11 00/17] Enable SRIOV on Power8 Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150130230803.GA6795@google.com \
    --to=bhelgaas@google.com \
    --cc=benh@au1.ibm.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).