linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: Benjamin Herrenschmidt <benh@au1.ibm.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>,
	gwshan@linux.vnet.ibm.com, linux-pci@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs
Date: Fri, 20 Feb 2015 17:47:09 -0600	[thread overview]
Message-ID: <20150220234709.GD21131@google.com> (raw)
In-Reply-To: <1423556085.4924.91.camel@au1.ibm.com>

On Tue, Feb 10, 2015 at 07:14:45PM +1100, Benjamin Herrenschmidt wrote:
> On Tue, 2015-02-10 at 14:25 +0800, Wei Yang wrote:
> > PF's resource will be assigned first, including normal BARs and IOV
> > BARs.
> > 
> > Then PF's driver will create VFs, in virtfn_add(). In this function,
> > VF's
> > resources is calculated from its PF's IOV BAR.
> > 
> > If you reset VF's resource as PFs, no one will try to assign it again.
> 
> So the problem is that the flag indicating VF is lost ? IE. We should
> still mark them unset, but preserve that flag ?

I think the problem is that the normal path for PCI_REASSIGN_ALL_RSRC is
at boot-time, where we do this:

    pcibios_init
      pcibios_scan_phb
        pci_scan_child_bus
          ...
            pci_device_add
              pci_fixup_device(pci_fixup_header)
		pcibios_fixup_resources                       # header fixup
		  for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
		    dev->resource[i].start = 0
      pcibios_resource_survey
        pcibios_allocate_resources

and we assign dev->resource[] for everything in
pcibios_allocate_resources().

But VFs are enumerated later, when they are enabled by the PF driver after
boot, so we have this path:

    pci_enable_sriov
      sriov_enable
        virtfn_add(vf_id)
          for (i = 0; i < 6; i++)
            vf->resource[i].start = pf->resource[IOV + i].start + (size * vf_id)
          pci_device_add
            pci_fixup_device(pci_fixup_header)
              pcibios_fixup_resources                   # header fixup
                for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
                  vf->resource[i].start = 0

Here, we clear out vf->resource[0..5] in the header fixup, but we're not
going to call pcibios_allocate_resources() again to reassign them.

So I think the *intent* of PCI_REASSIGN_ALL_RSRC is preserved if
pcibios_fixup_resources() leaves the VF resources alone, because the VF
resources are completely determined by the PF resources, and the PF
resources have already been reassigned.

If my understanding is correct, I think the patch is reasonable, and I
would try to put some of this explanation into the changelog.

Bjorn

  reply	other threads:[~2015-02-20 23:47 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-22  5:54 [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2014-12-22  5:54 ` [PATCH V10 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2014-12-22  5:54 ` [PATCH V10 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2014-12-22  5:54 ` [PATCH V10 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2014-12-22  5:54 ` [PATCH V10 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2014-12-22  5:54 ` [PATCH V10 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2014-12-22  5:54 ` [PATCH V10 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2014-12-22  5:54 ` [PATCH V10 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2014-12-22  5:54 ` [PATCH V10 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2014-12-22  5:54 ` [PATCH V10 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2014-12-22  5:54 ` [PATCH V10 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2014-12-22  5:54 ` [PATCH V10 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2014-12-22  5:54 ` [PATCH V10 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2014-12-22  5:54 ` [PATCH V10 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2014-12-22  5:54 ` [PATCH V10 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2014-12-22  5:54 ` [PATCH V10 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2014-12-22  5:54 ` [PATCH V10 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2014-12-22  5:54 ` [PATCH V10 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2014-12-22  6:05 ` [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2015-01-13 18:05   ` Bjorn Helgaas
2015-01-15  2:27     ` [PATCH V11 " Wei Yang
2015-01-15  2:27       ` [PATCH V11 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2015-02-20 23:09         ` Bjorn Helgaas
2015-03-02  6:05           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2015-02-10  0:26         ` Benjamin Herrenschmidt
2015-02-10  1:35           ` Wei Yang
2015-02-10  2:13             ` Benjamin Herrenschmidt
2015-02-10  6:18               ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2015-02-10  0:32         ` Benjamin Herrenschmidt
2015-02-10  1:44           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2015-01-15  2:27       ` [PATCH V11 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2015-01-15  2:27       ` [PATCH V11 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2015-02-04 23:44         ` Bjorn Helgaas
2015-02-10  1:02           ` Benjamin Herrenschmidt
2015-02-20  0:56             ` Bjorn Helgaas
2015-02-20  2:41               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2015-02-10  0:36         ` Benjamin Herrenschmidt
2015-02-10  1:51           ` Wei Yang
2015-02-10  2:14             ` Benjamin Herrenschmidt
2015-02-10  6:25               ` Wei Yang
2015-02-10  8:14                 ` Benjamin Herrenschmidt
2015-02-20 23:47                   ` Bjorn Helgaas [this message]
2015-03-02  6:09                     ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2015-02-20 23:19         ` Bjorn Helgaas
2015-02-23  0:13           ` Gavin Shan
2015-02-24  8:13             ` Bjorn Helgaas
2015-02-24  8:25               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2015-01-15  2:28       ` [PATCH V11 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2015-01-15  2:28       ` [PATCH V11 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2015-01-15  2:28       ` [PATCH V11 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 23:08           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 22:45           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-01-30 23:08         ` Bjorn Helgaas
2015-02-03  1:30           ` Wei Yang
2015-02-03  7:01           ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Wei Yang
2015-02-04  0:19             ` Bjorn Helgaas
2015-02-04  3:34               ` Wei Yang
2015-02-04 14:19                 ` Bjorn Helgaas
2015-02-04 15:20                   ` Wei Yang
2015-02-04 16:08                   ` [PATCH] pci/iov: fix memory leak introduced in "PCI: Store individual VF BAR size in struct pci_sriov" Wei Yang
2015-02-04 16:28                     ` Bjorn Helgaas
2015-02-04 20:53                 ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Bjorn Helgaas
2015-02-05  3:01                   ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2015-01-15  2:28       ` [PATCH V11 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-04 22:05         ` Bjorn Helgaas
2015-02-05  0:07           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-02-04 23:44       ` [PATCH V11 00/17] Enable SRIOV on Power8 Bjorn Helgaas
2015-02-05  0:13         ` Wei Yang
2015-02-05  6:34         ` [PATCH 0/3] Code adjustment on pci/virtualization Wei Yang
2015-02-05  6:34           ` [PATCH 1/3] fix on Store individual VF BAR size in struct pci_sriov Wei Yang
2015-02-05  6:34           ` [PATCH 2/3] fix Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-05  6:34           ` [PATCH 3/3] remove the unused end in pnv_pci_vf_resource_shift() Wei Yang
2015-02-10  0:25         ` [PATCH V11 00/17] Enable SRIOV on Power8 Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150220234709.GD21131@google.com \
    --to=bhelgaas@google.com \
    --cc=benh@au1.ibm.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).