From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ig0-f180.google.com ([209.85.213.180]:33469 "EHLO mail-ig0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751131AbbCTWot (ORCPT ); Fri, 20 Mar 2015 18:44:49 -0400 Received: by ignm3 with SMTP id m3so328221ign.0 for ; Fri, 20 Mar 2015 15:44:48 -0700 (PDT) Date: Fri, 20 Mar 2015 17:44:46 -0500 From: Bjorn Helgaas To: Nobuhiro Iwamatsu Cc: phil.edworthy@renesas.com, linux-pci@vger.kernel.org Subject: Re: [PATCH] PCI: rcar: Add PCIE_CONF_REGNO macro for PCIECAR register Message-ID: <20150320224446.GO26935@google.com> References: <1426047830-26410-1-git-send-email-nobuhiro.iwamatsu.yj@renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1426047830-26410-1-git-send-email-nobuhiro.iwamatsu.yj@renesas.com> Sender: linux-pci-owner@vger.kernel.org List-ID: On Wed, Mar 11, 2015 at 01:23:50PM +0900, Nobuhiro Iwamatsu wrote: > The reg variable used when setting PCIECAR register need to be masked by 0xFC > by restriction of the corresponding register. > This adds PCIE_CONF_REGNO are macros for masking changes that PCIE_CONF_REGNO > is used when setting PCIECAR register. > > Signed-off-by: Nobuhiro Iwamatsu > --- > drivers/pci/host/pcie-rcar.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c > index c57bd0a..1f493ef 100644 > --- a/drivers/pci/host/pcie-rcar.c > +++ b/drivers/pci/host/pcie-rcar.c > @@ -104,6 +104,7 @@ > #define PCIE_CONF_BUS(b) (((b) & 0xff) << 24) > #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19) > #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16) > +#define PCIE_CONF_REGNO(r) (r & 0xfc) > > #define RCAR_PCI_MAX_RESOURCES 4 > #define MAX_NR_INBOUND_MAPS 6 > @@ -227,7 +228,8 @@ static int rcar_pcie_config_access(struct rcar_pcie *pcie, > > /* Set the PIO address */ > rcar_pci_write_reg(pcie, PCIE_CONF_BUS(bus->number) | > - PCIE_CONF_DEV(dev) | PCIE_CONF_FUNC(func) | reg, PCIECAR); > + PCIE_CONF_DEV(dev) | PCIE_CONF_FUNC(func) | > + PCIE_CONF_REGNO(reg), PCIECAR); What about the other rcar_pci_read_reg()/rcar_pci_write_reg() calls (the ones for "if (pci_is_root_bus())"? Do those need to be limited to the first 256 bytes also? It seems a little strange to mask "reg = where & ~3" at the top (making it 4-byte aligned), then mask "r & 0xfc" here (limiting to first 256 bytes and also making it 4-byte aligned). Seems like those two operations should either be combined or completely split. > /* Enable the configuration access */ > if (bus->parent->number == pcie->root_bus_nr) > -- > 2.1.3 >