Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: gwshan@linux.vnet.ibm.com, bhelgaas@google.com,
	linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH V4 10/11] powerpc/powernv: use "compound" as the child's list_head for compound PE
Date: Fri, 15 May 2015 17:37:10 +1000	[thread overview]
Message-ID: <20150515073710.GB7980@gwshan> (raw)
In-Reply-To: <1431668786-30371-11-git-send-email-weiyang@linux.vnet.ibm.com>

On Fri, May 15, 2015 at 01:46:25PM +0800, Wei Yang wrote:
>Commit 262af557dd75(powerpc/powernv: Enable M64 aperatus for PHB3)
>introduces the concept of compound PE, and they are linked together to
>master PE's slaves lish_head with the list field. While this field is
>usually used to linked to the phb->ioda.pe_list to represents the PE is
>used.
>
>This patch introduces a field "compound" to link those compound PEs.
>

I don't think we needn't it with:

- VF PEs are classified to master and slave PEs.
- Master PEs is linked to phb->list;
- Slave PEs is linked to master->slaves;
- When iterating all PEs, you have to check PE's flag to cover all
  (master & slave) VF PEs:

  for_each_pe_in_phb_list {
         /* Things we're doing */
         if (pe_is_not_vf_pe ||
             pe_is_not_master_pe)
             continue;

         for_each_pe_in_master_vf_pe_list {
               /* slave VF PEs */
         }
  }

Thanks,
Gavin

>Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
>---
> arch/powerpc/platforms/powernv/pci-ioda.c |    8 ++++----
> arch/powerpc/platforms/powernv/pci.h      |    1 +
> 2 files changed, 5 insertions(+), 4 deletions(-)
>
>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>index 920c252..843457b 100644
>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>@@ -344,7 +344,7 @@ done:
> 		} else {
> 			pe->flags |= PNV_IODA_PE_SLAVE;
> 			pe->master = master_pe;
>-			list_add_tail(&pe->list, &master_pe->slaves);
>+			list_add_tail(&pe->compound, &master_pe->slaves);
> 		}
> 	}
>
>@@ -428,7 +428,7 @@ static void pnv_ioda_freeze_pe(struct pnv_phb *phb, int pe_no)
> 	if (!(pe->flags & PNV_IODA_PE_MASTER))
> 		return;
>
>-	list_for_each_entry(slave, &pe->slaves, list) {
>+	list_for_each_entry(slave, &pe->slaves, compound) {
> 		rc = opal_pci_eeh_freeze_set(phb->opal_id,
> 					     slave->pe_number,
> 					     OPAL_EEH_ACTION_SET_FREEZE_ALL);
>@@ -464,7 +464,7 @@ static int pnv_ioda_unfreeze_pe(struct pnv_phb *phb, int pe_no, int opt)
> 		return 0;
>
> 	/* Clear frozen state for slave PEs */
>-	list_for_each_entry(slave, &pe->slaves, list) {
>+	list_for_each_entry(slave, &pe->slaves, compound) {
> 		rc = opal_pci_eeh_freeze_clear(phb->opal_id,
> 					     slave->pe_number,
> 					     opt);
>@@ -516,7 +516,7 @@ static int pnv_ioda_get_pe_state(struct pnv_phb *phb, int pe_no)
> 	if (!(pe->flags & PNV_IODA_PE_MASTER))
> 		return state;
>
>-	list_for_each_entry(slave, &pe->slaves, list) {
>+	list_for_each_entry(slave, &pe->slaves, compound) {
> 		rc = opal_pci_eeh_freeze_status(phb->opal_id,
> 						slave->pe_number,
> 						&fstate,
>diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
>index 070ee88..540ab1e 100644
>--- a/arch/powerpc/platforms/powernv/pci.h
>+++ b/arch/powerpc/platforms/powernv/pci.h
>@@ -73,6 +73,7 @@ struct pnv_ioda_pe {
> 	/* PEs in compound case */
> 	struct pnv_ioda_pe	*master;
> 	struct list_head	slaves;
>+	struct list_head	compound;
>
> 	/* Link in list of PE#s */
> 	struct list_head	dma_link;
>-- 
>1.7.9.5
>


  reply	other threads:[~2015-05-15  7:38 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-15  5:46 [PATCH V4 00/11] VF EEH on Power8 Wei Yang
2015-05-15  5:46 ` [PATCH V4 01/11] pci/iov: rename and export virtfn_add/virtfn_remove Wei Yang
2015-05-15  5:56   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 02/11] powerpc/pci_dn: cache vf_index in pci_dn Wei Yang
2015-05-15  5:57   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 03/11] powerpc/pci: remove PCI devices in reverse order Wei Yang
2015-05-15  5:46 ` [PATCH V4 04/11] powerpc/eeh: cache address range just for normal device Wei Yang
2015-05-15  5:46 ` [PATCH V4 05/11] powerpc/powernv: create/release eeh_dev for VF Wei Yang
2015-05-15  6:19   ` Gavin Shan
2015-05-15  8:53     ` Wei Yang
2015-05-15  5:46 ` [PATCH V4 06/11] powerpc/eeh: create EEH_PE_VF for VF PE Wei Yang
2015-05-15  6:26   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 07/11] powerpc/powernv: Support EEH reset for VFs Wei Yang
2015-05-15  7:12   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 08/11] powerpc/powernv: Support PCI config restore " Wei Yang
2015-05-15  7:27   ` Gavin Shan
2015-05-15  9:18     ` Wei Yang
2015-05-15  5:46 ` [PATCH V4 09/11] powerpc/eeh: handle VF PE properly Wei Yang
2015-05-15  7:31   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 10/11] powerpc/powernv: use "compound" as the child's list_head for compound PE Wei Yang
2015-05-15  7:37   ` Gavin Shan [this message]
2015-05-15  5:46 ` [PATCH V4 11/11] powerpc/powernv: compound PE for VFs Wei Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150515073710.GB7980@gwshan \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox