From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ig0-f170.google.com ([209.85.213.170]:35828 "EHLO mail-ig0-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752459AbbETOwI (ORCPT ); Wed, 20 May 2015 10:52:08 -0400 Received: by igbyr2 with SMTP id yr2so104514004igb.0 for ; Wed, 20 May 2015 07:52:07 -0700 (PDT) Date: Wed, 20 May 2015 09:52:04 -0500 From: Bjorn Helgaas To: Hauke Mehrtens Cc: rjui@broadcom.com, arnd@arndb.de, linux-pci@vger.kernel.org, sbranden@broadcom.com, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, zajec5@gmail.com Subject: Re: [PATCH 0/2] PCI: iproc: add bcma PCIe 2.0 controller Message-ID: <20150520145204.GA30184@google.com> References: <1431465781-10753-1-git-send-email-hauke@hauke-m.de> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 In-Reply-To: <1431465781-10753-1-git-send-email-hauke@hauke-m.de> Sender: linux-pci-owner@vger.kernel.org List-ID: On Tue, May 12, 2015 at 11:22:59PM +0200, Hauke Mehrtens wrote: > After Ray submitted the PCIe controller for the iProc devices using > pure device tree this adds support for the devices using bcma to scan > the bus. This should replaces the driver I initially send for inclusion. > > @Ray The driver found in the Broadcom SDK does some more stuff: > * setting up some DMA memory areas > * chaining MPS and MRRS to 512 > * PHY changes: > * "improving" the PCIe jitter > * some special initializations for the 3rd PCIe port > > For me it works without these additions, but I haven't tested for > performance or stability or 3rd port. Can you check if this is needed > at all for the devices found on the market? > > Hauke Mehrtens (2): > PCI: iproc: make of_irq_parse_and_map_pci() configurable > PCI: iproc: add bcma pcie driver > > drivers/pci/host/Kconfig | 11 ++++ > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pcie-iproc-bcma.c | 112 +++++++++++++++++++++++++++++++++ > drivers/pci/host/pcie-iproc-platform.c | 2 + > drivers/pci/host/pcie-iproc.c | 2 +- > drivers/pci/host/pcie-iproc.h | 1 + > 6 files changed, 128 insertions(+), 1 deletion(-) > create mode 100644 drivers/pci/host/pcie-iproc-bcma.c Applied to pci/host-iproc for v4.2 with acks from Ray and Rafał, thanks! I corrected some typos, the most important being MODULE_LICENSE, where I changed "GPLv2" to "GPL v2". See license_is_gpl_compatible() and eed6542dd53f ("PCI: generic: Fix GPL v2 license string typo"). Bjorn