From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Tue, 15 Sep 2015 18:36:55 +0100 From: Will Deacon To: David Daney Cc: "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , Rob Herring , Frank Rowand , "grant.likely@linaro.org" , Bjorn Helgaas , "linux-pci@vger.kernel.org" , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , "linux-arm-kernel@lists.infradead.org" , David Daney , lorenzo.pieralisi@arm.com Subject: Re: [PATCH 2/6] PCI: generic: Only fixup irqs for bus we are creating. Message-ID: <20150915173654.GJ31157@arm.com> References: <1442013719-5001-1-git-send-email-ddaney.cavm@gmail.com> <1442013719-5001-3-git-send-email-ddaney.cavm@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <1442013719-5001-3-git-send-email-ddaney.cavm@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: Hi David, On Sat, Sep 12, 2015 at 12:21:55AM +0100, David Daney wrote: > From: David Daney > > Use pci_walk_bus() to restrict the fixup irq actions to only the bus > being created. > > If we create multiple buses with pci-host-generic, or there are buses > created by other drivers, we don't want to call pci_fixup_irqs() which > operates on all devices, not just the devices on the bus being added. > The consequence is that either the fixups are done more than once, or > in some cases incorrect fixups could be applied. > > Signed-off-by: David Daney > --- > drivers/pci/host/pci-host-generic.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c > index 265dd25..a0fb241 100644 > --- a/drivers/pci/host/pci-host-generic.c > +++ b/drivers/pci/host/pci-host-generic.c > @@ -205,6 +205,12 @@ static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci) > return 0; > } > > +static int gen_pci_fixup_irq_cb(struct pci_dev *dev, void *arg) > +{ > + pdev_fixup_irq(dev, pci_common_swizzle, of_irq_parse_and_map_pci); > + return 0; > +} > + > static int gen_pci_probe(struct platform_device *pdev) > { > int err; > @@ -262,7 +268,7 @@ static int gen_pci_probe(struct platform_device *pdev) > return -ENODEV; > } > > - pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > + pci_walk_bus(bus, gen_pci_fixup_irq_cb, NULL); Any chance we could put something in the core PCI code for this? I think any host controller wanting to work with arm64 is potentially going to run into the same problem. Will