From: Bjorn Helgaas <helgaas@kernel.org>
To: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Hanjun Guo <hanjun.guo@linaro.org>,
Liviu Dudau <Liviu.Dudau@arm.com>,
linux-acpi@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, x86@kernel.org
Subject: Re: [Patch v7 6/7] x86/PCI/ACPI: Use common interface to support PCI host bridge
Date: Thu, 15 Oct 2015 15:46:53 -0500 [thread overview]
Message-ID: <20151015204653.GF10442@localhost> (raw)
In-Reply-To: <1444804182-6596-7-git-send-email-jiang.liu@linux.intel.com>
On Wed, Oct 14, 2015 at 02:29:41PM +0800, Jiang Liu wrote:
> Use common interface to simplify ACPI PCI host bridge implementation.
>
> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
> Signed-off-by: Liu Jiang <jiang.liu@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> arch/x86/pci/acpi.c | 294 +++++++++++++++------------------------------------
> 1 file changed, 87 insertions(+), 207 deletions(-)
>
> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
> index 5bc018559cc4..3cd69832d7f4 100644
> --- a/arch/x86/pci/acpi.c
> +++ b/arch/x86/pci/acpi.c
> @@ -4,16 +4,15 @@
> #include <linux/irq.h>
> #include <linux/dmi.h>
> #include <linux/slab.h>
> +#include <linux/pci-acpi.h>
> #include <asm/numa.h>
> #include <asm/pci_x86.h>
>
> struct pci_root_info {
> - struct acpi_device *bridge;
> - char name[16];
> + struct acpi_pci_root_info common;
> struct pci_sysdata sd;
> #ifdef CONFIG_PCI_MMCONFIG
> bool mcfg_added;
> - u16 segment;
> u8 start_bus;
> u8 end_bus;
> #endif
> @@ -178,15 +177,18 @@ static int check_segment(u16 seg, struct device *dev, char *estr)
> return 0;
> }
>
> -static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
> - u8 end, phys_addr_t addr)
> +static int setup_mcfg_map(struct acpi_pci_root_info *ci)
> {
> - int result;
> - struct device *dev = &info->bridge->dev;
> + int result, seg;
> + struct pci_root_info *info;
> + struct acpi_pci_root *root = ci->root;
> + struct device *dev = &ci->bridge->dev;
>
> - info->start_bus = start;
> - info->end_bus = end;
> + info = container_of(ci, struct pci_root_info, common);
> + info->start_bus = (u8)root->secondary.start;
> + info->end_bus = (u8)root->secondary.end;
> info->mcfg_added = false;
> + seg = info->sd.domain;
>
> /* return success if MMCFG is not in use */
> if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
> @@ -195,7 +197,8 @@ static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
> if (!(pci_probe & PCI_PROBE_MMCONF))
> return check_segment(seg, dev, "MMCONFIG is disabled,");
>
> - result = pci_mmconfig_insert(dev, seg, start, end, addr);
> + result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus,
> + root->mcfg_addr);
> if (result == 0) {
> /* enable MMCFG if it hasn't been enabled yet */
> if (raw_pci_ext_ops == NULL)
> @@ -208,134 +211,55 @@ static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
> return 0;
> }
>
> -static void teardown_mcfg_map(struct pci_root_info *info)
> +static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
> {
> + struct pci_root_info *info;
> +
> + info = container_of(ci, struct pci_root_info, common);
> if (info->mcfg_added) {
> - pci_mmconfig_delete(info->segment, info->start_bus,
> - info->end_bus);
> + pci_mmconfig_delete(info->sd.domain,
> + info->start_bus, info->end_bus);
> info->mcfg_added = false;
> }
> }
> #else
> -static int setup_mcfg_map(struct pci_root_info *info,
> - u16 seg, u8 start, u8 end,
> - phys_addr_t addr)
> +static int setup_mcfg_map(struct acpi_pci_root_info *ci)
> {
> return 0;
> }
> -static void teardown_mcfg_map(struct pci_root_info *info)
> +
> +static void teardown_mcfg_map(struct acpi_pci_root_info *ci)
> {
> }
> #endif
>
> -static void validate_resources(struct device *dev, struct list_head *crs_res,
> - unsigned long type)
> +static int pci_acpi_root_get_node(struct acpi_pci_root *root)
> {
> - LIST_HEAD(list);
> - struct resource *res1, *res2, *root = NULL;
> - struct resource_entry *tmp, *entry, *entry2;
> -
> - BUG_ON((type & (IORESOURCE_MEM | IORESOURCE_IO)) == 0);
> - root = (type & IORESOURCE_MEM) ? &iomem_resource : &ioport_resource;
> -
> - list_splice_init(crs_res, &list);
> - resource_list_for_each_entry_safe(entry, tmp, &list) {
> - bool free = false;
> - resource_size_t end;
> -
> - res1 = entry->res;
> - if (!(res1->flags & type))
> - goto next;
> -
> - /* Exclude non-addressable range or non-addressable portion */
> - end = min(res1->end, root->end);
> - if (end <= res1->start) {
> - dev_info(dev, "host bridge window %pR (ignored, not CPU addressable)\n",
> - res1);
> - free = true;
> - goto next;
> - } else if (res1->end != end) {
> - dev_info(dev, "host bridge window %pR ([%#llx-%#llx] ignored, not CPU addressable)\n",
> - res1, (unsigned long long)end + 1,
> - (unsigned long long)res1->end);
> - res1->end = end;
> - }
> -
> - resource_list_for_each_entry(entry2, crs_res) {
> - res2 = entry2->res;
> - if (!(res2->flags & type))
> - continue;
> -
> - /*
> - * I don't like throwing away windows because then
> - * our resources no longer match the ACPI _CRS, but
> - * the kernel resource tree doesn't allow overlaps.
> - */
> - if (resource_overlaps(res1, res2)) {
> - res2->start = min(res1->start, res2->start);
> - res2->end = max(res1->end, res2->end);
> - dev_info(dev, "host bridge window expanded to %pR; %pR ignored\n",
> - res2, res1);
> - free = true;
> - goto next;
> - }
> - }
> + int busnum = root->secondary.start;
> + struct acpi_device *device = root->device;
> + int node = acpi_get_node(device->handle);
>
> -next:
> - resource_list_del(entry);
> - if (free)
> - resource_list_free_entry(entry);
> - else
> - resource_list_add_tail(entry, crs_res);
> + if (node == NUMA_NO_NODE) {
> + node = x86_pci_root_bus_node(busnum);
> + if (node != 0 && node != NUMA_NO_NODE)
> + dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
> + node);
> }
> + if (node != NUMA_NO_NODE && !node_online(node))
> + node = NUMA_NO_NODE;
> +
> + return node;
> }
>
> -static void add_resources(struct pci_root_info *info,
> - struct list_head *resources,
> - struct list_head *crs_res)
> +static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci)
> {
> - struct resource_entry *entry, *tmp;
> - struct resource *res, *conflict, *root = NULL;
> -
> - validate_resources(&info->bridge->dev, crs_res, IORESOURCE_MEM);
> - validate_resources(&info->bridge->dev, crs_res, IORESOURCE_IO);
> -
> - resource_list_for_each_entry_safe(entry, tmp, crs_res) {
> - res = entry->res;
> - if (res->flags & IORESOURCE_MEM)
> - root = &iomem_resource;
> - else if (res->flags & IORESOURCE_IO)
> - root = &ioport_resource;
> - else
> - BUG_ON(res);
> -
> - conflict = insert_resource_conflict(root, res);
> - if (conflict) {
> - dev_info(&info->bridge->dev,
> - "ignoring host bridge window %pR (conflicts with %s %pR)\n",
> - res, conflict->name, conflict);
> - resource_list_destroy_entry(entry);
> - }
> - }
> -
> - list_splice_tail(crs_res, resources);
> + return setup_mcfg_map(ci);
> }
>
> -static void release_pci_root_info(struct pci_host_bridge *bridge)
> +static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
> {
> - struct resource *res;
> - struct resource_entry *entry;
> - struct pci_root_info *info = bridge->release_data;
> -
> - resource_list_for_each_entry(entry, &bridge->windows) {
> - res = entry->res;
> - if (res->parent &&
> - (res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
> - release_resource(res);
> - }
> -
> - teardown_mcfg_map(info);
> - kfree(info);
> + teardown_mcfg_map(ci);
> + kfree(container_of(ci, struct pci_root_info, common));
> }
>
> /*
> @@ -358,47 +282,44 @@ static bool resource_is_pcicfg_ioport(struct resource *res)
> res->start == 0xCF8 && res->end == 0xCFF;
> }
>
> -static void probe_pci_root_info(struct pci_root_info *info,
> - struct acpi_device *device,
> - int busnum, int domain,
> - struct list_head *list)
> +static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
> {
> - int ret;
> + struct acpi_device *device = ci->bridge;
> + int busnum = ci->root->secondary.start;
> struct resource_entry *entry, *tmp;
> + int status;
>
> - sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
> - info->bridge = device;
> - ret = acpi_dev_get_resources(device, list,
> - acpi_dev_filter_resource_type_cb,
> - (void *)(IORESOURCE_IO | IORESOURCE_MEM));
> - if (ret < 0)
> - dev_warn(&device->dev,
> - "failed to parse _CRS method, error code %d\n", ret);
> - else if (ret == 0)
> - dev_dbg(&device->dev,
> - "no IO and memory resources present in _CRS\n");
> - else
> - resource_list_for_each_entry_safe(entry, tmp, list) {
> - if ((entry->res->flags & IORESOURCE_DISABLED) ||
> - resource_is_pcicfg_ioport(entry->res))
> + status = acpi_pci_probe_root_resources(ci);
> + if (pci_use_crs) {
> + resource_list_for_each_entry_safe(entry, tmp, &ci->resources)
> + if (resource_is_pcicfg_ioport(entry->res))
> resource_list_destroy_entry(entry);
> - else
> - entry->res->name = info->name;
> - }
> + return status;
> + }
> +
> + resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
> + dev_printk(KERN_DEBUG, &device->dev,
> + "host bridge window %pR (ignored)\n", entry->res);
> + resource_list_destroy_entry(entry);
> + }
> + x86_pci_root_bus_resources(busnum, &ci->resources);
> +
> + return 0;
> }
>
> +static struct acpi_pci_root_ops acpi_pci_root_ops = {
> + .pci_ops = &pci_root_ops,
> + .init_info = pci_acpi_root_init_info,
> + .release_info = pci_acpi_root_release_info,
> + .prepare_resources = pci_acpi_root_prepare_resources,
> +};
> +
> struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> {
> - struct acpi_device *device = root->device;
> - struct pci_root_info *info;
> int domain = root->segment;
> int busnum = root->secondary.start;
> - struct resource_entry *res_entry;
> - LIST_HEAD(crs_res);
> - LIST_HEAD(resources);
> + int node = pci_acpi_root_get_node(root);
> struct pci_bus *bus;
> - struct pci_sysdata *sd;
> - int node;
>
> if (pci_ignore_seg)
> root->segment = domain = 0;
> @@ -410,71 +331,33 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> return NULL;
> }
>
> - node = acpi_get_node(device->handle);
> - if (node == NUMA_NO_NODE) {
> - node = x86_pci_root_bus_node(busnum);
> - if (node != 0 && node != NUMA_NO_NODE)
> - dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
> - node);
> - }
> -
> - if (node != NUMA_NO_NODE && !node_online(node))
> - node = NUMA_NO_NODE;
> -
> - info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
> - if (!info) {
> - printk(KERN_WARNING "pci_bus %04x:%02x: "
> - "ignored (out of memory)\n", domain, busnum);
> - return NULL;
> - }
> -
> - sd = &info->sd;
> - sd->domain = domain;
> - sd->node = node;
> - sd->companion = device;
> -
> bus = pci_find_bus(domain, busnum);
> if (bus) {
> /*
> * If the desired bus has been scanned already, replace
> * its bus->sysdata.
> */
> - memcpy(bus->sysdata, sd, sizeof(*sd));
> - kfree(info);
> - } else {
> - /* insert busn res at first */
> - pci_add_resource(&resources, &root->secondary);
> + struct pci_sysdata sd = {
> + .domain = domain,
> + .node = node,
> + .companion = root->device
> + };
>
> - /*
> - * _CRS with no apertures is normal, so only fall back to
> - * defaults or native bridge info if we're ignoring _CRS.
> - */
> - probe_pci_root_info(info, device, busnum, domain, &crs_res);
> - if (pci_use_crs) {
> - add_resources(info, &resources, &crs_res);
> - } else {
> - resource_list_for_each_entry(res_entry, &crs_res)
> - dev_printk(KERN_DEBUG, &device->dev,
> - "host bridge window %pR (ignored)\n",
> - res_entry->res);
> - resource_list_free(&crs_res);
> - x86_pci_root_bus_resources(busnum, &resources);
> - }
> -
> - if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
> - (u8)root->secondary.end, root->mcfg_addr))
> - bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
> - sd, &resources);
> -
> - if (bus) {
> - pci_scan_child_bus(bus);
> - pci_set_host_bridge_release(
> - to_pci_host_bridge(bus->bridge),
> - release_pci_root_info, info);
> - } else {
> - resource_list_free(&resources);
> - teardown_mcfg_map(info);
> - kfree(info);
> + memcpy(bus->sysdata, &sd, sizeof(sd));
> + } else {
> + struct pci_root_info *info;
> +
> + info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
> + if (!info)
> + dev_err(&root->device->dev,
> + "pci_bus %04x:%02x: ignored (out of memory)\n",
> + domain, busnum);
> + else {
> + info->sd.domain = domain;
> + info->sd.node = node;
> + info->sd.companion = root->device;
> + bus = acpi_pci_root_create(root, &acpi_pci_root_ops,
> + &info->common, &info->sd);
> }
> }
>
> @@ -487,9 +370,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> pcie_bus_configure_settings(child);
> }
>
> - if (bus && node != NUMA_NO_NODE)
> - dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
> -
> return bus;
> }
>
> --
> 1.7.10.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-15 20:46 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 6:29 [Patch v7 0/7] Consolidate ACPI PCI root common code into ACPI core Jiang Liu
2015-10-14 6:29 ` [Patch v7 1/7] ACPI/PCI: Enhance ACPI core to support sparse IO space Jiang Liu
2015-10-14 6:29 ` [Patch v7 2/7] ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge Jiang Liu
2015-10-14 6:29 ` [Patch v7 3/7] ia64/PCI: Use common struct resource_entry to replace struct iospace_resource Jiang Liu
2015-10-14 6:29 ` [Patch v7 4/7] PCI/ACPI: Add interface acpi_pci_root_create() Jiang Liu
2015-10-15 20:47 ` Bjorn Helgaas
2015-10-21 9:57 ` Tomasz Nowicki
2015-10-21 11:02 ` Liviu Dudau
2015-10-21 11:27 ` Tomasz Nowicki
2015-10-21 11:42 ` Lorenzo Pieralisi
2015-10-21 12:16 ` Tomasz Nowicki
2015-10-21 11:48 ` Liviu Dudau
2015-10-21 11:49 ` Jiang Liu
2015-10-21 11:52 ` Liviu Dudau
2015-11-05 14:21 ` Tomasz Nowicki
2015-11-05 18:19 ` Lorenzo Pieralisi
2015-11-06 7:55 ` Jiang Liu
2015-11-06 8:52 ` Jiang Liu
2015-11-06 10:37 ` Tomasz Nowicki
2015-11-06 11:46 ` Jiang Liu
2015-11-06 12:40 ` Tomasz Nowicki
2015-11-06 13:22 ` Jiang Liu
2015-11-06 14:45 ` Lorenzo Pieralisi
2015-11-06 15:32 ` Jiang Liu
2015-11-06 15:44 ` Jiang Liu
2015-11-23 15:23 ` Sinan Kaya
2015-11-09 14:07 ` Tomasz Nowicki
2015-11-09 17:10 ` Lorenzo Pieralisi
2015-11-09 20:09 ` Arnd Bergmann
2015-11-10 5:50 ` Jiang Liu
2015-11-11 17:46 ` Lorenzo Pieralisi
2015-11-11 18:12 ` Liviu Dudau
2015-11-11 20:55 ` Arnd Bergmann
2015-11-12 12:08 ` Lorenzo Pieralisi
2015-11-12 8:43 ` Jiang Liu
2015-11-12 13:21 ` Tomasz Nowicki
2015-11-12 14:04 ` Jiang Liu
2015-11-12 14:45 ` Tomasz Nowicki
2015-11-12 15:05 ` Jiang Liu
2015-11-13 12:57 ` Tomasz Nowicki
2015-11-13 17:03 ` Lorenzo Pieralisi
2015-11-13 17:49 ` Jiang Liu
2015-11-20 10:18 ` Lorenzo Pieralisi
2015-11-27 6:59 ` Tomasz Nowicki
2015-11-06 12:51 ` Lorenzo Pieralisi
2015-11-06 10:18 ` Tomasz Nowicki
2015-11-06 7:51 ` Jiang Liu
2015-10-14 6:29 ` [Patch v7 5/7] ACPI, PCI: Reset acpi_root_dev->domain to 0 when pci_ignore_seg is set Jiang Liu
2015-10-14 6:29 ` [Patch v7 6/7] x86/PCI/ACPI: Use common interface to support PCI host bridge Jiang Liu
2015-10-15 20:46 ` Bjorn Helgaas [this message]
2015-10-14 6:29 ` [Patch v7 7/7] ia64/PCI/ACPI: " Jiang Liu
2015-10-15 20:48 ` [Patch v7 0/7] Consolidate ACPI PCI root common code into ACPI core Bjorn Helgaas
2015-10-15 21:49 ` Rafael J. Wysocki
2015-10-16 1:56 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151015204653.GF10442@localhost \
--to=helgaas@kernel.org \
--cc=Liviu.Dudau@arm.com \
--cc=bhelgaas@google.com \
--cc=hanjun.guo@linaro.org \
--cc=jiang.liu@linux.intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marc.zyngier@arm.com \
--cc=rafael.j.wysocki@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).