linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <helgaas@kernel.org>
To: Yinghai Lu <yinghai@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	David Miller <davem@davemloft.net>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Wei Yang <weiyang@linux.vnet.ibm.com>, TJ <linux@iam.tj>,
	Yijing Wang <wangyijing@huawei.com>,
	Khalid Aziz <khalid.aziz@oracle.com>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 03/60] sparc/PCI: Unify pci_register_region()
Date: Tue, 20 Oct 2015 16:57:14 -0500	[thread overview]
Message-ID: <20151020215714.GI8224@localhost> (raw)
In-Reply-To: <1444340359-8011-4-git-send-email-yinghai@kernel.org>

On Thu, Oct 08, 2015 at 02:38:22PM -0700, Yinghai Lu wrote:
> We register regions for legacy and iommu and all have open code.
> 
> Unify them to pci_register_region() and call it accordingly.
> 
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> ---
>  arch/sparc/kernel/pci_common.c | 83 +++++++++++++++++++-----------------------
>  1 file changed, 37 insertions(+), 46 deletions(-)
> 
> diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c
> index 28e976a..c4b6989 100644
> --- a/arch/sparc/kernel/pci_common.c
> +++ b/arch/sparc/kernel/pci_common.c
> @@ -328,41 +328,49 @@ void pci_get_pbm_props(struct pci_pbm_info *pbm)
>  	}
>  }
>  
> -static void pci_register_legacy_regions(struct resource *io_res,
> -					struct resource *mem_res)
> +static void pci_register_region(struct pci_pbm_info *pbm, const char *name,
> +				resource_size_t rstart, resource_size_t size)
>  {
> -	struct resource *p;
> +	struct resource *res, *conflict;
> +	struct resource *mem_res = &pbm->mem_space;
> +	resource_size_t offset = pbm->mem_offset;
> +	resource_size_t mem_rstart, mem_rend;
> +	resource_size_t rend = rstart + size - 1UL;
>  
> -	/* VGA Video RAM. */
> -	p = kzalloc(sizeof(*p), GFP_KERNEL);
> -	if (!p)
> +	if (!mem_res->flags)
>  		return;
>  
> -	p->name = "Video RAM area";
> -	p->start = mem_res->start + 0xa0000UL;
> -	p->end = p->start + 0x1ffffUL;
> -	p->flags = IORESOURCE_BUSY;
> -	request_resource(mem_res, p);
> +	mem_rstart = mem_res->start - offset;
> +	mem_rend = mem_res->end - offset;

This is essentially doing pcibios_bus_to_resource(), except in an
unnecessarily arch-dependent way.  Can you rework it to use
pcibios_bus_to_resource()?  I think you'll have to do
pci_register_legacy_regions() in pci_scan_one_pbm() instead of in
pci_determine_mem_io_space(), so that you have a struct pci_bus to
use, but your next patch does that anyway.

>  
> -	p = kzalloc(sizeof(*p), GFP_KERNEL);
> -	if (!p)
> +	/* contain checking */
> +	if (!(mem_rstart <= rstart && mem_rend >= rend))
>  		return;
>  
> -	p->name = "System ROM";
> -	p->start = mem_res->start + 0xf0000UL;
> -	p->end = p->start + 0xffffUL;
> -	p->flags = IORESOURCE_BUSY;
> -	request_resource(mem_res, p);
> -
> -	p = kzalloc(sizeof(*p), GFP_KERNEL);
> -	if (!p)
> +	res = kzalloc(sizeof(*res), GFP_KERNEL);
> +	if (!res)
>  		return;
>  
> -	p->name = "Video ROM";
> -	p->start = mem_res->start + 0xc0000UL;
> -	p->end = p->start + 0x7fffUL;
> -	p->flags = IORESOURCE_BUSY;
> -	request_resource(mem_res, p);
> +	res->name = name;
> +	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
> +	res->start = rstart + offset;
> +	res->end = rend + offset;
> +	conflict = request_resource_conflict(mem_res, res);
> +	if (conflict) {
> +		printk(KERN_DEBUG "PCI: %s can't claim %s %pR: address conflict with %s %pR\n",
> +			pbm->name, res->name, res, conflict->name, conflict);
> +		kfree(res);
> +	}
> +}
> +
> +static void pci_register_legacy_regions(struct pci_pbm_info *pbm)
> +{
> +	/* VGA Video RAM. */
> +	pci_register_region(pbm, "Video RAM area", 0xa0000UL, 0x20000UL);
> +
> +	pci_register_region(pbm, "System ROM",     0xf0000UL, 0x10000UL);
> +
> +	pci_register_region(pbm, "Video ROM",      0xc0000UL,  0x8000UL);
>  }
>  
>  static void pci_register_iommu_region(struct pci_pbm_info *pbm)
> @@ -370,24 +378,8 @@ static void pci_register_iommu_region(struct pci_pbm_info *pbm)
>  	const u32 *vdma = of_get_property(pbm->op->dev.of_node, "virtual-dma",
>  					  NULL);
>  
> -	if (vdma) {
> -		struct resource *rp = kzalloc(sizeof(*rp), GFP_KERNEL);
> -
> -		if (!rp) {
> -			pr_info("%s: Cannot allocate IOMMU resource.\n",
> -				pbm->name);
> -			return;
> -		}
> -		rp->name = "IOMMU";
> -		rp->start = pbm->mem_space.start + (unsigned long) vdma[0];
> -		rp->end = rp->start + (unsigned long) vdma[1] - 1UL;
> -		rp->flags = IORESOURCE_BUSY;
> -		if (request_resource(&pbm->mem_space, rp)) {
> -			pr_info("%s: Unable to request IOMMU resource.\n",
> -				pbm->name);
> -			kfree(rp);
> -		}
> -	}
> +	if (vdma)
> +		pci_register_region(pbm, "IOMMU", vdma[0], vdma[1]);
>  }
>  
>  void pci_determine_mem_io_space(struct pci_pbm_info *pbm)
> @@ -506,8 +498,7 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm)
>  	if (pbm->mem64_space.flags)
>  		request_resource(&iomem_resource, &pbm->mem64_space);
>  
> -	pci_register_legacy_regions(&pbm->io_space,
> -				    &pbm->mem_space);
> +	pci_register_legacy_regions(pbm);
>  	pci_register_iommu_region(pbm);
>  }
>  
> -- 
> 1.8.4.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-10-20 21:57 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-08 21:38 [PATCH v7 00/60] PCI: Resource allocation cleanup for v4.4 Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 01/60] sparc/PCI: Add mem64 resource parsing for root bus Yinghai Lu
2015-10-09 16:15   ` Khalid Aziz
2015-10-20 16:42   ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 02/60] sparc/PCI: Use correct bus address to resource offset Yinghai Lu
2015-10-09 16:16   ` Khalid Aziz
2015-10-20 16:45   ` Bjorn Helgaas
2015-10-20 19:54   ` Bjorn Helgaas
2015-10-20 20:07     ` Khalid Aziz
2015-10-20 20:34       ` Yinghai Lu
2015-10-20 20:49         ` Khalid Aziz
2015-10-20 23:51         ` Khalid Aziz
2015-10-21  0:03           ` Yinghai Lu
2015-10-21  0:25             ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 03/60] sparc/PCI: Unify pci_register_region() Yinghai Lu
2015-10-09 16:16   ` Khalid Aziz
2015-10-20 21:57   ` Bjorn Helgaas [this message]
2015-10-20 22:16     ` Yinghai Lu
2015-10-20 22:30       ` Yinghai Lu
2015-10-21  2:35         ` Bjorn Helgaas
2015-10-21 18:16           ` Yinghai Lu
2015-10-21 18:50             ` Bjorn Helgaas
2015-10-21 22:32               ` Yinghai Lu
2015-10-21 22:59                 ` Yinghai Lu
2015-10-22  1:15                   ` Yinghai Lu
2015-10-22 19:56                     ` Yinghai Lu
2015-10-22 21:43                       ` Yinghai Lu
2015-10-22  1:27             ` David Miller
2015-10-22  3:47               ` Benjamin Herrenschmidt
2015-10-23  5:38                 ` Bjorn Helgaas
2015-10-08 21:38 ` [PATCH v7 04/60] sparc/PCI: Reserve legacy mmio after PCI mmio Yinghai Lu
2015-10-09 16:19   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 05/60] sparc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-09 16:19   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 06/60] sparc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-09 16:19   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 07/60] PCI: kill wrong quirk about M7101 Yinghai Lu
2015-10-09 16:20   ` Khalid Aziz
2015-10-12 19:46   ` Meelis Roos
2015-10-12 22:41     ` Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 08/60] powerpc/PCI: Keep resource idx order with bridge register number Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 09/60] powerpc/PCI: Add IORESOURCE_MEM_64 for 64-bit resource in OF parsing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 10/60] OF/PCI: Add IORESOURCE_MEM_64 for 64-bit resource Yinghai Lu
2015-10-09 16:20   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 11/60] PCI: Check pref compatible bit for mem64 resource of PCIe device Yinghai Lu
2015-10-09 16:20   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 12/60] PCI: Only treat non-pref mmio64 as pref if all bridges have MEM_64 Yinghai Lu
2015-10-09 16:21   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 13/60] PCI: Add has_mem64 for struct host_bridge Yinghai Lu
2015-10-09 16:21   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 14/60] PCI: Only treat non-pref mmio64 as pref if host bridge has mmio64 Yinghai Lu
2015-10-09 16:21   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 15/60] PCI: Restore pref MMIO allocation logic for host bridge without mmio64 Yinghai Lu
2015-10-09 16:22   ` Khalid Aziz
2015-10-08 21:38 ` [PATCH v7 16/60] PCI: Don't release fixed resource for realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 17/60] PCI: Claim fixed resource during remove/rescan path Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 18/60] PCI: Set resource to FIXED for LSI devices Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 19/60] PCI: Separate realloc list checking after allocation Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 20/60] PCI: Treat optional as required in first try for bridge rescan Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 21/60] PCI: Get new realloc size for bridge for last try Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 22/60] PCI: Don't release sibling bridge resources during hotplug Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 23/60] PCI: Cleanup res_to_dev_res() printout Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 24/60] PCI: Reuse res_to_dev_res() in reassign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 25/60] PCI: Use correct align for optional only resources during sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 26/60] PCI: Optimize bus min_align/size calculation during sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 27/60] PCI: Optimize bus align/size calculation for optional " Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 28/60] PCI: Don't add too much optional size for hotplug bridge MMIO Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 29/60] PCI: Reorder resources list for required/optional resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 30/60] PCI: Remove duplicated code for resource sorting Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 31/60] PCI: Rename pdev_sort_resources() to pdev_assign_resources_prepare() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 32/60] PCI: Treat ROM resource as optional during realloc Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 33/60] PCI: Add debug printout during releasing partial assigned resources Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 34/60] PCI: Simplify res reference using in __assign_resources_sorted() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 35/60] PCI: Add __add_to_list() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 36/60] PCI: Cache window alignment value during bus sizing Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 37/60] PCI: Check if resource is allocated before trying to assign one Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 38/60] PCI: Separate out save_resources()/restore_resources() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 39/60] PCI: Move comment to pci_need_to_release() Yinghai Lu
2015-10-08 21:38 ` [PATCH v7 40/60] PCI: Separate required+optional assigning to another function Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 41/60] PCI: Skip required+optional if there is no optional Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 42/60] PCI: Move saved required resource list out of required+optional assigning Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 43/60] PCI: Add alt_size ressource allocation support Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 44/60] PCI: Add support for more than two alt_size entries under same bridge Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 45/60] PCI: Fix size calculation with old_size on rescan path Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 46/60] PCI: Don't add too much optional size for hotplug bridge io Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 47/60] PCI: Move ISA io port align out of calculate_iosize() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 48/60] PCI: Don't add too much io port for hotplug bridge with old size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 49/60] PCI: Unify calculate_size() for io port and MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 50/60] PCI: Allow bridge optional only io port resource required size to be 0 Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 51/60] PCI: Unify skip_ioresource_align() Yinghai Lu
2015-10-13  9:45   ` [v7,51/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 52/60] PCI: Kill macro checking for bus io port sizing Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 53/60] resources: Split out __allocate_resource() Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 54/60] resources: Make allocate_resource() return best fit resource Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 55/60] PCI, x86: Allocate from high in available window for MMIO Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 56/60] PCI: Add debug print out for min_align and alt_size Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 57/60] PCI, x86: Add pci=assign_pref_bars to reallocate pref BARs Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 58/60] PCI: Introduce resource_disabled() Yinghai Lu
2015-10-13  9:48   ` [v7,58/60] " Michael Ellerman
2015-10-08 21:39 ` [PATCH v7 59/60] PCI: Don't set flags to 0 when assign resource fail Yinghai Lu
2015-10-08 21:39 ` [PATCH v7 60/60] PCI: Only try to assign io port only for root bus that support it Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151020215714.GI8224@localhost \
    --to=helgaas@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=davem@davemloft.net \
    --cc=khalid.aziz@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux@iam.tj \
    --cc=wangyijing@huawei.com \
    --cc=weiyang@linux.vnet.ibm.com \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).