From: Bjorn Helgaas <helgaas@kernel.org>
To: Andy Lutomirski <luto@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org
Subject: Re: [PATCH] pcie_aspm: Make link_state_store consistent with link_state_show
Date: Thu, 3 Dec 2015 11:21:28 -0600 [thread overview]
Message-ID: <20151203172128.GA17565@localhost> (raw)
In-Reply-To: <6ff64f0313c4e6400ef536017078e58ec3487c71.1447949082.git.luto@kernel.org>
On Thu, Nov 19, 2015 at 08:05:35AM -0800, Andy Lutomirski wrote:
> If CONFIG_PCIEASPM_DEBUG is set, then pci devices have a link_state
> attribute. Reading that attribute shows the state as a bit mask: 1
> means L0S upstream, 2 means L0S downstream, and 4 means L1.
>
> Oddly, writing to link_state is inconsistent and gets translated,
> leading to mysterious results in which the value you store isn't
> comparable the value you load back out.
>
> Fix it by making link_state_store match link_state_show.
>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
Applied to pci/aspm for v4.5, thanks! You didn't touch the
"aspm_disabled" check, but I moved it above the input validation code to
make the patch look like the attached. I think it's better to not
even look at the input if aspm_disabled, and this also puts the
validation code all together.
Let me know if you object.
Bjorn
commit 57d86a0485a30145382ad03b9504cc03ba4641c7
Author: Andy Lutomirski <luto@kernel.org>
Date: Thu Nov 19 08:05:35 2015 -0800
PCI/ASPM: Make sysfs link_state_store() consistent with link_state_show()
If CONFIG_PCIEASPM_DEBUG is set, then PCI devices have a link_state
attribute. Reading that attribute shows the state as a bit mask: 1
means L0S upstream, 2 means L0S downstream, and 4 means L1.
Oddly, writing to link_state is inconsistent and gets translated, leading
to mysterious results in which the value you store isn't comparable the
value you load back out.
Fix it by making link_state_store() match link_state_show().
[bhelgaas: Check "aspm_disabled" *before* validating input. When
"aspm_disabled" is set, this changes the error for invalid input from
-EINVAL to -EPERM.]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 317e355..2dfe7fd 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -834,21 +834,15 @@ static ssize_t link_state_store(struct device *dev,
{
struct pci_dev *pdev = to_pci_dev(dev);
struct pcie_link_state *link, *root = pdev->link_state->root;
- u32 val, state = 0;
-
- if (kstrtouint(buf, 10, &val))
- return -EINVAL;
+ u32 state;
if (aspm_disabled)
return -EPERM;
- if (n < 1 || val > 3)
- return -EINVAL;
- /* Convert requested state to ASPM state */
- if (val & PCIE_LINK_STATE_L0S)
- state |= ASPM_STATE_L0S;
- if (val & PCIE_LINK_STATE_L1)
- state |= ASPM_STATE_L1;
+ if (kstrtouint(buf, 10, &state))
+ return -EINVAL;
+ if ((state & ~ASPM_STATE_ALL) != 0)
+ return -EINVAL;
down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
next prev parent reply other threads:[~2015-12-03 17:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 16:05 [PATCH] pcie_aspm: Make link_state_store consistent with link_state_show Andy Lutomirski
2015-12-03 17:21 ` Bjorn Helgaas [this message]
2015-12-03 20:35 ` Andy Lutomirski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151203172128.GA17565@localhost \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=luto@kernel.org \
--cc=mjg59@srcf.ucam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox