From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Date: Thu, 4 Feb 2016 17:53:25 +0000
From: Paul Burton <paul.burton@imgtec.com>
To: Rob Herring <robh@kernel.org>
CC: Linux-MIPS <linux-mips@linux-mips.org>,
	Bharat Kumar Gogada <bharatku@xilinx.com>,
	Michal Simek <michal.simek@xilinx.com>,
	"Ravikiran Gummaluri" <rgummal@xilinx.com>,
	Ley Foon Tan <lftan@altera.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Scott Branden <sbranden@broadcom.com>,
	"Stanimir Varbanov" <svarbanov@mm-sol.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Duc Dang <dhdang@apm.com>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Gabriele Paoloni <gabriele.paoloni@huawei.com>,
	Marc Zyngier <marc.zyngier@arm.com>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	Ray Jui <rjui@broadcom.com>,
	"Hauke Mehrtens" <hauke@hauke-m.de>
Subject: Re: [PATCH v3 6/6] PCI: xilinx: Allow build on MIPS platforms
Message-ID: <20160204175325.GB31145@NP-P-BURTON>
References: <1454602213-967-1-git-send-email-paul.burton@imgtec.com>
 <1454602213-967-7-git-send-email-paul.burton@imgtec.com>
 <CAL_JsqLRMiJ-0j_PrXSKqf6MrRfyqbDGaiaiEn4rAoFaCNgtKQ@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
In-Reply-To: <CAL_JsqLRMiJ-0j_PrXSKqf6MrRfyqbDGaiaiEn4rAoFaCNgtKQ@mail.gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-pci.vger.kernel.org>

On Thu, Feb 04, 2016 at 11:46:28AM -0600, Rob Herring wrote:
> On Thu, Feb 4, 2016 at 10:10 AM, Paul Burton <paul.burton@imgtec.com> wrote:
> > Allow the xilinx-pcie driver to be built on MIPS platforms. This will be
> > used on the MIPS Boston board.
> >
> > Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> >
> > ---
> >
> > Changes in v3:
> > - Split out from Boston patchset.
> >
> > Changes in v2: None
> >
> >  drivers/pci/host/Kconfig | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> > index 75a6054..0aee193 100644
> > --- a/drivers/pci/host/Kconfig
> > +++ b/drivers/pci/host/Kconfig
> > @@ -81,7 +81,7 @@ config PCI_KEYSTONE
> >
> >  config PCIE_XILINX
> >         bool "Xilinx AXI PCIe host bridge support"
> > -       depends on ARCH_ZYNQ
> > +       depends on ARCH_ZYNQ || MIPS
> 
> Why don't you just remove the dependency? Then it gets better build coverage.
> 
> Rob

That seems like a call best made by whomever has to maintain this - if
that's the preferred way to go I'm fine with it.

Thanks,
    Paul