* [PATCH 0/2] ARM: imx6sx - add initial PCIe support @ 2016-02-14 20:52 Christoph Fritz 2016-02-14 20:52 ` [PATCH 1/2] ARM: imx6sx: Add PCIe register definitions for iomuxc gpr Christoph Fritz 2016-02-14 20:52 ` [PATCH 2/2] PCI: imx6: add initial imx6sx support Christoph Fritz 0 siblings, 2 replies; 6+ messages in thread From: Christoph Fritz @ 2016-02-14 20:52 UTC (permalink / raw) To: Lucas Stach, Richard Zhu, Bjorn Helgaas, Lee Jones Cc: Fabio Estevam, linux-pci Add PCIe driver support for imx6sx. Christoph Fritz (2): ARM: imx6sx: Add PCIe register definitions for iomuxc gpr PCI: imx6: add initial imx6sx support drivers/pci/host/pci-imx6.c | 172 +++++++++++++++++++++------- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 15 +++ 2 files changed, 144 insertions(+), 43 deletions(-) -- 2.1.4 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] ARM: imx6sx: Add PCIe register definitions for iomuxc gpr 2016-02-14 20:52 [PATCH 0/2] ARM: imx6sx - add initial PCIe support Christoph Fritz @ 2016-02-14 20:52 ` Christoph Fritz 2016-02-15 8:19 ` Lee Jones 2016-02-14 20:52 ` [PATCH 2/2] PCI: imx6: add initial imx6sx support Christoph Fritz 1 sibling, 1 reply; 6+ messages in thread From: Christoph Fritz @ 2016-02-14 20:52 UTC (permalink / raw) To: Lucas Stach, Richard Zhu, Bjorn Helgaas, Lee Jones Cc: Fabio Estevam, linux-pci This patch adds macros to define masks and bits for imx6sx PCIe registers. This is based on a patch by Richard Zhu. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> --- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index 558a485..93d859b 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -422,6 +422,12 @@ #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26) #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26) #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26) +#define IMX6SX_GPR5_PCIE_BTNRST_MASK (0x1 << 19) +#define IMX6SX_GPR5_PCIE_BTNRST_RESET (0x1 << 19) +#define IMX6SX_GPR5_PCIE_BTNRST_RELEASE (0x0 << 19) +#define IMX6SX_GPR5_PCIE_PERST_MASK (0x1 << 18) +#define IMX6SX_GPR5_PCIE_PERST_RESET (0x1 << 18) +#define IMX6SX_GPR5_PCIE_PERST_RELEASE (0x0 << 18) #define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4) #define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4) #define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4) @@ -435,6 +441,15 @@ #define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1) #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN_MASK (0x1 << 30) +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN_ENABLE (0x1 << 30) +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN_DISABLE (0x0 << 30) +#define IMX6SX_GPR12_PCIE_PM_TURNOFF_MASK (0x1 << 16) +#define IMX6SX_GPR12_PCIE_PM_TURNOFF_OFF (0x1 << 16) +#define IMX6SX_GPR12_PCIE_PM_TURNOFF_RELEASE (0x0 << 16) +#define IMX6SX_GPR12_PCIE_RX_EQ_MASK (0x7 << 0) +#define IMX6SX_GPR12_PCIE_RX_EQ_2 (0x2 << 0) + /* For imx6ul iomux gpr register field define */ #define IMX6UL_GPR1_ENET1_CLK_DIR (0x1 << 17) #define IMX6UL_GPR1_ENET2_CLK_DIR (0x1 << 18) -- 2.1.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] ARM: imx6sx: Add PCIe register definitions for iomuxc gpr 2016-02-14 20:52 ` [PATCH 1/2] ARM: imx6sx: Add PCIe register definitions for iomuxc gpr Christoph Fritz @ 2016-02-15 8:19 ` Lee Jones 0 siblings, 0 replies; 6+ messages in thread From: Lee Jones @ 2016-02-15 8:19 UTC (permalink / raw) To: Christoph Fritz Cc: Lucas Stach, Richard Zhu, Bjorn Helgaas, Fabio Estevam, linux-pci The subject line is wrong. It's not an ARM patch, but an MFD one. On Sun, 14 Feb 2016, Christoph Fritz wrote: > This patch adds macros to define masks and bits for imx6sx > PCIe registers. This is based on a patch by Richard Zhu. > > Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> > --- > include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h > index 558a485..93d859b 100644 > --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h > +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h > @@ -422,6 +422,12 @@ > #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26) > #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26) > #define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26) > +#define IMX6SX_GPR5_PCIE_BTNRST_MASK (0x1 << 19) All of these (1 << x) should be BIT(x). > +#define IMX6SX_GPR5_PCIE_BTNRST_RESET (0x1 << 19) > +#define IMX6SX_GPR5_PCIE_BTNRST_RELEASE (0x0 << 19) There is no need for all these (0 << x) entries. (0 << x) is always 0. > +#define IMX6SX_GPR5_PCIE_PERST_MASK (0x1 << 18) > +#define IMX6SX_GPR5_PCIE_PERST_RESET (0x1 << 18) > +#define IMX6SX_GPR5_PCIE_PERST_RELEASE (0x0 << 18) > #define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4) > #define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4) > #define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4) > @@ -435,6 +441,15 @@ > #define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1) > #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) > > +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN_MASK (0x1 << 30) > +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN_ENABLE (0x1 << 30) > +#define IMX6SX_GPR12_PCIE_TEST_POWERDOWN_DISABLE (0x0 << 30) > +#define IMX6SX_GPR12_PCIE_PM_TURNOFF_MASK (0x1 << 16) > +#define IMX6SX_GPR12_PCIE_PM_TURNOFF_OFF (0x1 << 16) > +#define IMX6SX_GPR12_PCIE_PM_TURNOFF_RELEASE (0x0 << 16) > +#define IMX6SX_GPR12_PCIE_RX_EQ_MASK (0x7 << 0) > +#define IMX6SX_GPR12_PCIE_RX_EQ_2 (0x2 << 0) > + > /* For imx6ul iomux gpr register field define */ > #define IMX6UL_GPR1_ENET1_CLK_DIR (0x1 << 17) > #define IMX6UL_GPR1_ENET2_CLK_DIR (0x1 << 18) -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/2] PCI: imx6: add initial imx6sx support 2016-02-14 20:52 [PATCH 0/2] ARM: imx6sx - add initial PCIe support Christoph Fritz 2016-02-14 20:52 ` [PATCH 1/2] ARM: imx6sx: Add PCIe register definitions for iomuxc gpr Christoph Fritz @ 2016-02-14 20:52 ` Christoph Fritz 2016-02-15 7:24 ` Richard Zhu 1 sibling, 1 reply; 6+ messages in thread From: Christoph Fritz @ 2016-02-14 20:52 UTC (permalink / raw) To: Lucas Stach, Richard Zhu, Bjorn Helgaas, Lee Jones Cc: Fabio Estevam, linux-pci This patch adds initial PCIe support for the imx6 SoC derivate imx6sx. PCI_MSI support is untested as its necessary suspend/resume quirk is left out of this patch. This patch is heavily based on patches by Richard Zhu. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> --- drivers/pci/host/pci-imx6.c | 172 +++++++++++++++++++++++++++++++++----------- 1 file changed, 129 insertions(+), 43 deletions(-) diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index fe60096..73abc3e 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -22,6 +22,7 @@ #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #include <linux/resource.h> #include <linux/signal.h> #include <linux/types.h> @@ -35,9 +36,13 @@ struct imx6_pcie { struct gpio_desc *reset_gpio; struct clk *pcie_bus; struct clk *pcie_phy; + struct clk *pcie_inbound_axi; struct clk *pcie; struct pcie_port pp; struct regmap *iomuxc_gpr; + struct regmap *gpc_ips_reg; + struct regulator *pcie_phy_regulator; + bool is_imx6sx; void __iomem *mem_base; }; @@ -80,6 +85,9 @@ struct imx6_pcie { #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5) #define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3) +#define PCIE_PHY_IMX6SX_GPC_CNTR 0x0 +#define PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ BIT(7) + static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val) { u32 val; @@ -214,35 +222,46 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp) struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); u32 val, gpr1, gpr12; - /* - * If the bootloader already enabled the link we need some special - * handling to get the core back into a state where it is safe to - * touch it for configuration. As there is no dedicated reset signal - * wired up for MX6QDL, we need to manually force LTSSM into "detect" - * state before completely disabling LTSSM, which is a prerequisite - * for core configuration. - * - * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong - * indication that the bootloader activated the link. - */ - regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); - regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); - - if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && - (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { - val = readl(pp->dbi_base + PCIE_PL_PFLR); - val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; - val |= PCIE_PL_PFLR_FORCE_LINK; - writel(val, pp->dbi_base + PCIE_PL_PFLR); - + if (imx6_pcie->is_imx6sx) { regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); - } + IMX6SX_GPR12_PCIE_TEST_POWERDOWN_MASK, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN_ENABLE); + /* Force PCIe PHY reset */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, + IMX6SX_GPR5_PCIE_BTNRST_MASK, + IMX6SX_GPR5_PCIE_BTNRST_RESET); + } else { + /* + * If the bootloader already enabled the link we need some + * special handling to get the core back into a state where + * it is safe to touch it for configuration. As there is no + * dedicated reset signal to manually force LTSSM into "detect" + * state before completely disabling LTSSM, which is a + * prerequisite for core configuration. + * + * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have + * a strong indication that the bootloader activated the link. + */ + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); + + if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && + (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { + val = readl(pp->dbi_base + PCIE_PL_PFLR); + val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; + val |= PCIE_PL_PFLR_FORCE_LINK; + writel(val, pp->dbi_base + PCIE_PL_PFLR); + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_PCIE_CTL_2, 0); + } - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, + IMX6Q_GPR1_PCIE_TEST_PD); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN, 0); + } return 0; } @@ -270,18 +289,31 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) goto err_pcie; } - /* power up core phy and enable ref clock */ - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); - /* - * the async reset input need ref clock to sync internally, - * when the ref clock comes after reset, internal synced - * reset time is too short, cannot meet the requirement. - * add one ~10us delay here. - */ - udelay(10); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); + if (imx6_pcie->is_imx6sx) { + ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi); + if (ret) { + dev_err(pp->dev, "unable to enable pcie_axi clock\n"); + goto err_inbound_axi; + } + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN_MASK, + IMX6SX_GPR12_PCIE_TEST_POWERDOWN_DISABLE); + } else { + /* power up core phy and enable ref clock */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, 0); + /* + * the async reset input need ref clock to sync internally, + * when the ref clock comes after reset, internal synced + * reset time is too short , cannot meet the requirement. + * add one ~10us delay here. + */ + udelay(10); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN, + IMX6Q_GPR1_PCIE_REF_CLK_EN); + } /* allow the clocks to stabilize */ usleep_range(200, 500); @@ -292,8 +324,16 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) msleep(100); gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1); } + + if (imx6_pcie->is_imx6sx) + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, + IMX6SX_GPR5_PCIE_BTNRST_MASK, + IMX6SX_GPR5_PCIE_BTNRST_RELEASE); + return 0; +err_inbound_axi: + clk_disable_unprepare(imx6_pcie->pcie); err_pcie: clk_disable_unprepare(imx6_pcie->pcie_bus); err_pcie_bus: @@ -303,9 +343,28 @@ err_pcie_phy: } -static void imx6_pcie_init_phy(struct pcie_port *pp) +static int imx6_pcie_init_phy(struct pcie_port *pp) { struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); + int ret = 0; + + if (imx6_pcie->is_imx6sx) { + /* power up separate domain available on i.mx6sx */ + regmap_update_bits(imx6_pcie->gpc_ips_reg, + PCIE_PHY_IMX6SX_GPC_CNTR, + PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ, + PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ); + regulator_set_voltage(imx6_pcie->pcie_phy_regulator, + 1100000, 1100000); + ret = regulator_enable(imx6_pcie->pcie_phy_regulator); + if (ret) { + dev_err(pp->dev, "cannot enable pcie_phy regulator\n"); + return ret; + } + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6SX_GPR12_PCIE_RX_EQ_MASK, + IMX6SX_GPR12_PCIE_RX_EQ_2); + } regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); @@ -326,6 +385,8 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); + + return ret; } static int imx6_pcie_wait_for_link(struct pcie_port *pp) @@ -571,6 +632,9 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) pp = &imx6_pcie->pp; pp->dev = &pdev->dev; + imx6_pcie->is_imx6sx = of_device_is_compatible(pp->dev->of_node, + "fsl,imx6sx-pcie"); + /* Added for PCI abort handling */ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0, "imprecise external abort"); @@ -606,9 +670,30 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(imx6_pcie->pcie); } - /* Grab GPR config register range */ - imx6_pcie->iomuxc_gpr = - syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr"); + if (imx6_pcie->is_imx6sx) { + imx6_pcie->pcie_inbound_axi = devm_clk_get(&pdev->dev, + "pcie_inbound_axi"); + + if (IS_ERR(imx6_pcie->pcie_inbound_axi)) { + dev_err(&pdev->dev, + "pcie_incbound_axi clock missing or invalid\n"); + return PTR_ERR(imx6_pcie->pcie_inbound_axi); + } + + imx6_pcie->pcie_phy_regulator = devm_regulator_get(pp->dev, + "pcie-phy"); + + imx6_pcie->iomuxc_gpr = + syscon_regmap_lookup_by_compatible + ("fsl,imx6sx-iomuxc-gpr"); + + imx6_pcie->gpc_ips_reg = + syscon_regmap_lookup_by_compatible("fsl,imx6sx-gpc"); + } else { + imx6_pcie->iomuxc_gpr = + syscon_regmap_lookup_by_compatible + ("fsl,imx6q-iomuxc-gpr"); + } if (IS_ERR(imx6_pcie->iomuxc_gpr)) { dev_err(&pdev->dev, "unable to find iomuxc registers\n"); return PTR_ERR(imx6_pcie->iomuxc_gpr); @@ -632,6 +717,7 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) static const struct of_device_id imx6_pcie_of_match[] = { { .compatible = "fsl,imx6q-pcie", }, + { .compatible = "fsl,imx6sx-pcie", }, {}, }; MODULE_DEVICE_TABLE(of, imx6_pcie_of_match); -- 2.1.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* RE: [PATCH 2/2] PCI: imx6: add initial imx6sx support 2016-02-14 20:52 ` [PATCH 2/2] PCI: imx6: add initial imx6sx support Christoph Fritz @ 2016-02-15 7:24 ` Richard Zhu 2016-02-18 11:59 ` Christoph Fritz 0 siblings, 1 reply; 6+ messages in thread From: Richard Zhu @ 2016-02-15 7:24 UTC (permalink / raw) To: Christoph Fritz, Lucas Stach, Richard Zhu, Bjorn Helgaas, Lee Jones Cc: Fabio Estevam, linux-pci@vger.kernel.org > -----Original Message----- > From: Christoph Fritz [mailto:chf.fritz@googlemail.com] > Sent: Monday, February 15, 2016 4:53 AM > To: Lucas Stach; Richard Zhu; Bjorn Helgaas; Lee Jones > Cc: Fabio Estevam; linux-pci@vger.kernel.org > Subject: [PATCH 2/2] PCI: imx6: add initial imx6sx support > > This patch adds initial PCIe support for the imx6 SoC derivate imx6sx. > PCI_MSI support is untested as its necessary suspend/resume quirk is left out of > this patch. > This patch is heavily based on patches by Richard Zhu. > > Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> > --- > drivers/pci/host/pci-imx6.c | 172 +++++++++++++++++++++++++++++++++------ > ----- > 1 file changed, 129 insertions(+), 43 deletions(-) > > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index > fe60096..73abc3e 100644 > --- a/drivers/pci/host/pci-imx6.c > +++ b/drivers/pci/host/pci-imx6.c > @@ -22,6 +22,7 @@ > #include <linux/pci.h> > #include <linux/platform_device.h> > #include <linux/regmap.h> > +#include <linux/regulator/consumer.h> > #include <linux/resource.h> > #include <linux/signal.h> > #include <linux/types.h> > @@ -35,9 +36,13 @@ struct imx6_pcie { > struct gpio_desc *reset_gpio; > struct clk *pcie_bus; > struct clk *pcie_phy; > + struct clk *pcie_inbound_axi; > struct clk *pcie; > struct pcie_port pp; > struct regmap *iomuxc_gpr; > + struct regmap *gpc_ips_reg; > + struct regulator *pcie_phy_regulator; > + bool is_imx6sx; > void __iomem *mem_base; > }; > > @@ -80,6 +85,9 @@ struct imx6_pcie { > #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5) #define > PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3) > > +#define PCIE_PHY_IMX6SX_GPC_CNTR 0x0 > +#define PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ BIT(7) > + > static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val) { > u32 val; > @@ -214,35 +222,46 @@ static int imx6_pcie_assert_core_reset(struct > pcie_port *pp) > struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); > u32 val, gpr1, gpr12; > > - /* > - * If the bootloader already enabled the link we need some special > - * handling to get the core back into a state where it is safe to > - * touch it for configuration. As there is no dedicated reset signal > - * wired up for MX6QDL, we need to manually force LTSSM into > "detect" > - * state before completely disabling LTSSM, which is a prerequisite > - * for core configuration. > - * > - * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a > strong > - * indication that the bootloader activated the link. > - */ > - regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); > - regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); > - > - if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && > - (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { > - val = readl(pp->dbi_base + PCIE_PL_PFLR); > - val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; > - val |= PCIE_PL_PFLR_FORCE_LINK; > - writel(val, pp->dbi_base + PCIE_PL_PFLR); > - > + if (imx6_pcie->is_imx6sx) { > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > - IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); > - } > + > IMX6SX_GPR12_PCIE_TEST_POWERDOWN_MASK, > + > IMX6SX_GPR12_PCIE_TEST_POWERDOWN_ENABLE); > + /* Force PCIe PHY reset */ > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, > + IMX6SX_GPR5_PCIE_BTNRST_MASK, > + IMX6SX_GPR5_PCIE_BTNRST_RESET); > + } else { > + /* > + * If the bootloader already enabled the link we need some > + * special handling to get the core back into a state where > + * it is safe to touch it for configuration. As there is no > + * dedicated reset signal to manually force LTSSM into "detect" > + * state before completely disabling LTSSM, which is a > + * prerequisite for core configuration. > + * > + * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we > have > + * a strong indication that the bootloader activated the link. > + */ > + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); > + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > &gpr12); > + > + if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && > + (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { > + val = readl(pp->dbi_base + PCIE_PL_PFLR); > + val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; > + val |= PCIE_PL_PFLR_FORCE_LINK; > + writel(val, pp->dbi_base + PCIE_PL_PFLR); > + > + regmap_update_bits(imx6_pcie->iomuxc_gpr, > IOMUXC_GPR12, > + IMX6Q_GPR12_PCIE_CTL_2, 0); > + } > > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > + IMX6Q_GPR1_PCIE_TEST_PD, > + IMX6Q_GPR1_PCIE_TEST_PD); > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > + IMX6Q_GPR1_PCIE_REF_CLK_EN, 0); > + } > > return 0; > } > @@ -270,18 +289,31 @@ static int imx6_pcie_deassert_core_reset(struct > pcie_port *pp) > goto err_pcie; > } > > - /* power up core phy and enable ref clock */ > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); > - /* > - * the async reset input need ref clock to sync internally, > - * when the ref clock comes after reset, internal synced > - * reset time is too short, cannot meet the requirement. > - * add one ~10us delay here. > - */ > - udelay(10); > - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > - IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); > + if (imx6_pcie->is_imx6sx) { > + ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi); > + if (ret) { > + dev_err(pp->dev, "unable to enable pcie_axi clock\n"); > + goto err_inbound_axi; > + } > + > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > + IMX6SX_GPR12_PCIE_TEST_POWERDOWN_MASK, > + IMX6SX_GPR12_PCIE_TEST_POWERDOWN_DISABLE); > + } else { > + /* power up core phy and enable ref clock */ > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > + IMX6Q_GPR1_PCIE_TEST_PD, 0); > + /* > + * the async reset input need ref clock to sync internally, > + * when the ref clock comes after reset, internal synced > + * reset time is too short , cannot meet the requirement. > + * add one ~10us delay here. > + */ > + udelay(10); > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, > + IMX6Q_GPR1_PCIE_REF_CLK_EN, > + IMX6Q_GPR1_PCIE_REF_CLK_EN); > + } > > /* allow the clocks to stabilize */ > usleep_range(200, 500); > @@ -292,8 +324,16 @@ static int imx6_pcie_deassert_core_reset(struct > pcie_port *pp) > msleep(100); > gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1); > } > + > + if (imx6_pcie->is_imx6sx) > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, > + IMX6SX_GPR5_PCIE_BTNRST_MASK, > + IMX6SX_GPR5_PCIE_BTNRST_RELEASE); > + > return 0; > > +err_inbound_axi: > + clk_disable_unprepare(imx6_pcie->pcie); > err_pcie: > clk_disable_unprepare(imx6_pcie->pcie_bus); > err_pcie_bus: > @@ -303,9 +343,28 @@ err_pcie_phy: > > } > > -static void imx6_pcie_init_phy(struct pcie_port *pp) > +static int imx6_pcie_init_phy(struct pcie_port *pp) > { > struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); > + int ret = 0; > + > + if (imx6_pcie->is_imx6sx) { > + /* power up separate domain available on i.mx6sx */ > + regmap_update_bits(imx6_pcie->gpc_ips_reg, > + PCIE_PHY_IMX6SX_GPC_CNTR, > + PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ, > + PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ); [Zhu hongxing] First of all, thanks for trying to upstream imx6sx pcie driver. As Lucas discussed with me before, the GPC regulator operations should be touched in Imx pcie driver at all. These bits operations should be encapsulate into the PM system, for example, the regulator driver. > + regulator_set_voltage(imx6_pcie->pcie_phy_regulator, > + 1100000, 1100000); > + ret = regulator_enable(imx6_pcie->pcie_phy_regulator); > + if (ret) { > + dev_err(pp->dev, "cannot enable pcie_phy > regulator\n"); > + return ret; > + } > + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > + IMX6SX_GPR12_PCIE_RX_EQ_MASK, > + IMX6SX_GPR12_PCIE_RX_EQ_2); > + } > > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, > IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); > @@ -326,6 +385,8 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) > IMX6Q_GPR8_TX_SWING_FULL, 127 << 18); > regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8, > IMX6Q_GPR8_TX_SWING_LOW, 127 << 25); > + > + return ret; > } > > static int imx6_pcie_wait_for_link(struct pcie_port *pp) @@ -571,6 +632,9 > @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > pp = &imx6_pcie->pp; > pp->dev = &pdev->dev; > > + imx6_pcie->is_imx6sx = of_device_is_compatible(pp->dev->of_node, > + "fsl,imx6sx-pcie"); > + > /* Added for PCI abort handling */ > hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0, > "imprecise external abort"); > @@ -606,9 +670,30 @@ static int __init imx6_pcie_probe(struct > platform_device *pdev) > return PTR_ERR(imx6_pcie->pcie); > } > > - /* Grab GPR config register range */ > - imx6_pcie->iomuxc_gpr = > - syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc- > gpr"); > + if (imx6_pcie->is_imx6sx) { > + imx6_pcie->pcie_inbound_axi = devm_clk_get(&pdev->dev, > + "pcie_inbound_axi"); > + > + if (IS_ERR(imx6_pcie->pcie_inbound_axi)) { > + dev_err(&pdev->dev, > + "pcie_incbound_axi clock missing or invalid\n"); > + return PTR_ERR(imx6_pcie->pcie_inbound_axi); > + } > + > + imx6_pcie->pcie_phy_regulator = devm_regulator_get(pp- > >dev, > + "pcie-phy"); > + > + imx6_pcie->iomuxc_gpr = > + syscon_regmap_lookup_by_compatible > + ("fsl,imx6sx-iomuxc-gpr"); > + > + imx6_pcie->gpc_ips_reg = > + syscon_regmap_lookup_by_compatible("fsl,imx6sx- > gpc"); > + } else { > + imx6_pcie->iomuxc_gpr = > + syscon_regmap_lookup_by_compatible > + ("fsl,imx6q-iomuxc-gpr"); > + } > if (IS_ERR(imx6_pcie->iomuxc_gpr)) { > dev_err(&pdev->dev, "unable to find iomuxc registers\n"); > return PTR_ERR(imx6_pcie->iomuxc_gpr); @@ -632,6 +717,7 > @@ static void imx6_pcie_shutdown(struct platform_device *pdev) > > static const struct of_device_id imx6_pcie_of_match[] = { > { .compatible = "fsl,imx6q-pcie", }, > + { .compatible = "fsl,imx6sx-pcie", }, > {}, > }; > MODULE_DEVICE_TABLE(of, imx6_pcie_of_match); > -- > 2.1.4 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] PCI: imx6: add initial imx6sx support 2016-02-15 7:24 ` Richard Zhu @ 2016-02-18 11:59 ` Christoph Fritz 0 siblings, 0 replies; 6+ messages in thread From: Christoph Fritz @ 2016-02-18 11:59 UTC (permalink / raw) To: Richard Zhu Cc: Lucas Stach, Bjorn Helgaas, Lee Jones, Fabio Estevam, linux-pci@vger.kernel.org Hi Richard On Mon, 2016-02-15 at 07:24 +0000, Richard Zhu wrote: > > -----Original Message----- > > From: Christoph Fritz [mailto:chf.fritz@googlemail.com] > > -static void imx6_pcie_init_phy(struct pcie_port *pp) > > +static int imx6_pcie_init_phy(struct pcie_port *pp) > > { > > struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); > > + int ret = 0; > > + > > + if (imx6_pcie->is_imx6sx) { > > + /* power up separate domain available on i.mx6sx */ > > + regmap_update_bits(imx6_pcie->gpc_ips_reg, > > + PCIE_PHY_IMX6SX_GPC_CNTR, > > + PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ, > > + PCIE_PHY_IMX6SX_GPC_CNTR_PUP_REQ); > > [Zhu hongxing] First of all, thanks for trying to upstream imx6sx pcie driver. > As Lucas discussed with me before, the GPC regulator operations should be touched in > Imx pcie driver at all. These bits operations should be encapsulate into the PM system, > for example, the regulator driver. Ok, for an initial version, I'll just leave the regulator in my devicetree enabled. For further enhancements I suppose arch/arm/mach-imx/gpc.c needs to get touched? Let me reroll this patchset. Thanks -- Christoph ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-02-18 11:59 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-02-14 20:52 [PATCH 0/2] ARM: imx6sx - add initial PCIe support Christoph Fritz 2016-02-14 20:52 ` [PATCH 1/2] ARM: imx6sx: Add PCIe register definitions for iomuxc gpr Christoph Fritz 2016-02-15 8:19 ` Lee Jones 2016-02-14 20:52 ` [PATCH 2/2] PCI: imx6: add initial imx6sx support Christoph Fritz 2016-02-15 7:24 ` Richard Zhu 2016-02-18 11:59 ` Christoph Fritz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).