From: "Sean O. Stalley" <sean.stalley@intel.com>
To: Keith Busch <keith.busch@intel.com>
Cc: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [PATCH 1/2] pci: add option to ignore slot capabilities
Date: Fri, 12 Aug 2016 17:03:58 -0700 [thread overview]
Message-ID: <20160813000358.GA20474@sean.stalley.intel.com> (raw)
In-Reply-To: <1470687542-30155-1-git-send-email-keith.busch@intel.com>
Hi Keith,
On Mon, Aug 08, 2016 at 02:19:01PM -0600, Keith Busch wrote:
> This adds flags to struct pci_dev that can be set to request ignoring
> attention and power indicators. This is in prepration for devices that
> advertise these capabilities, but do not support it.
>
> Signed-off-by: Keith Busch <keith.busch@intel.com>
> ---
> drivers/pci/hotplug/pciehp_hpc.c | 6 ++++++
> include/linux/pci.h | 2 ++
> 2 files changed, 8 insertions(+)
>
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 08e84d6..3e6646c 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -804,6 +804,12 @@ struct controller *pcie_init(struct pcie_device *dev)
> }
> ctrl->pcie = dev;
> pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap);
> +
> + if (pdev->ignore_aip)
> + slot_cap &= ~PCI_EXP_SLTCAP_AIP;
> + if (pdev->ignore_pip)
> + slot_cap &= ~PCI_EXP_SLTCAP_PIP;
> +
I think we should clear these bits after the ctrl_info() below.
If we clear it immediately, the ctrl_info() will report these bits as cleared,
even though they may be set in hardware.
I don't think we want to put a value into the log that differs from what hardware reports.
> ctrl->slot_cap = slot_cap;
> mutex_init(&ctrl->ctrl_lock);
> init_waitqueue_head(&ctrl->queue);
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 9890906..d8bc530 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -308,6 +308,8 @@ struct pci_dev {
> powered on/off by the
> corresponding bridge */
> unsigned int ignore_hotplug:1; /* Ignore hotplug events */
> + unsigned int ignore_aip:1; /* Ignore attention indicator */
> + unsigned int ignore_pip:1; /* Ignore power indicator */
> unsigned int d3_delay; /* D3->D0 transition time in ms */
> unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
>
> --
> 2.7.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-13 0:12 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-08 20:19 [PATCH 1/2] pci: add option to ignore slot capabilities Keith Busch
2016-08-08 20:19 ` [PATCH 2/2] pci: Add ignore indicator quirk for devices Keith Busch
2016-08-15 17:40 ` Bjorn Helgaas
2016-08-15 19:23 ` Keith Busch
2016-08-15 19:50 ` Bjorn Helgaas
2016-08-15 22:35 ` Keith Busch
2016-08-16 3:03 ` Bjorn Helgaas
2016-08-17 21:37 ` Bjorn Helgaas
2016-08-17 23:09 ` Keith Busch
2016-08-18 19:56 ` Bjorn Helgaas
2016-08-18 22:46 ` Keith Busch
2016-08-22 16:55 ` Bjorn Helgaas
2016-08-22 21:15 ` Keith Busch
2016-08-23 13:39 ` Bjorn Helgaas
2016-08-23 17:10 ` Keith Busch
2016-08-23 17:14 ` Sinan Kaya
2016-08-23 19:23 ` Keith Busch
2016-08-23 19:52 ` Bjorn Helgaas
2016-08-23 20:44 ` Keith Busch
2016-08-23 20:02 ` Bjorn Helgaas
2016-08-24 17:33 ` Keith Busch
2016-08-13 0:03 ` Sean O. Stalley [this message]
2016-08-13 0:58 ` [PATCH 1/2] pci: add option to ignore slot capabilities Keith Busch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160813000358.GA20474@sean.stalley.intel.com \
--to=sean.stalley@intel.com \
--cc=bhelgaas@google.com \
--cc=keith.busch@intel.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).