From: Bjorn Helgaas <helgaas@kernel.org>
To: Keith Busch <keith.busch@intel.com>
Cc: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Ralf Baechle <ralf@linux-mips.org>,
Lukas Wunner <lukas@wunner.de>, Wei Zhang <wzhang@fb.com>
Subject: Re: [PATCHv3 4/5] pcie/aer: Cache capability position
Date: Tue, 27 Sep 2016 16:05:46 -0500 [thread overview]
Message-ID: <20160927210546.GB20252@localhost> (raw)
In-Reply-To: <1475007815-28354-5-git-send-email-keith.busch@intel.com>
On Tue, Sep 27, 2016 at 04:23:34PM -0400, Keith Busch wrote:
> This saves the position of the error reporting capability so that it
> doesn't need to be rediscovered during error handling.
>
> Signed-off-by: Keith Busch <keith.busch@intel.com>
> Cc: Lukas Wunner <lukas@wunner.de>
Applied to pci/aer for v4.9, thanks, Keith!
> ---
> drivers/pci/pcie/aer/aerdrv.c | 10 +++++-----
> drivers/pci/pcie/aer/aerdrv_core.c | 18 ++++++++++++------
> drivers/pci/probe.c | 3 ++-
> include/linux/pci.h | 5 +++++
> 4 files changed, 24 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
> index 48d21e0..24c6722 100644
> --- a/drivers/pci/pcie/aer/aerdrv.c
> +++ b/drivers/pci/pcie/aer/aerdrv.c
> @@ -134,7 +134,7 @@ static void aer_enable_rootport(struct aer_rpc *rpc)
> pcie_capability_clear_word(pdev, PCI_EXP_RTCTL,
> SYSTEM_ERROR_INTR_ON_MESG_MASK);
>
> - aer_pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> + aer_pos = pdev->aer_cap;
> /* Clear error status */
> pci_read_config_dword(pdev, aer_pos + PCI_ERR_ROOT_STATUS, ®32);
> pci_write_config_dword(pdev, aer_pos + PCI_ERR_ROOT_STATUS, reg32);
> @@ -173,7 +173,7 @@ static void aer_disable_rootport(struct aer_rpc *rpc)
> */
> set_downstream_devices_error_reporting(pdev, false);
>
> - pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> + pos = pdev->aer_cap;
> /* Disable Root's interrupt in response to error messages */
> pci_read_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, ®32);
> reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
> @@ -200,7 +200,7 @@ irqreturn_t aer_irq(int irq, void *context)
> unsigned long flags;
> int pos;
>
> - pos = pci_find_ext_capability(pdev->port, PCI_EXT_CAP_ID_ERR);
> + pos = pdev->port->aer_cap;
> /*
> * Must lock access to Root Error Status Reg, Root Error ID Reg,
> * and Root error producer/consumer index
> @@ -343,7 +343,7 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
> u32 reg32;
> int pos;
>
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
>
> /* Disable Root's interrupt in response to error messages */
> pci_read_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, ®32);
> @@ -396,7 +396,7 @@ static void aer_error_resume(struct pci_dev *dev)
> pcie_capability_write_word(dev, PCI_EXP_DEVSTA, reg16);
>
> /* Clean AER Root Error Status */
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
> pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
> if (dev->error_state == pci_channel_io_normal)
> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
> index 521e39c..d9175ef 100644
> --- a/drivers/pci/pcie/aer/aerdrv_core.c
> +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> @@ -40,7 +40,7 @@ int pci_enable_pcie_error_reporting(struct pci_dev *dev)
> if (pcie_aer_get_firmware_first(dev))
> return -EIO;
>
> - if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR))
> + if (!dev->aer_cap)
> return -EIO;
>
> return pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_AER_FLAGS);
> @@ -62,7 +62,7 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
> int pos;
> u32 status;
>
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
> if (!pos)
> return -EIO;
>
> @@ -83,7 +83,7 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
> if (!pci_is_pcie(dev))
> return -ENODEV;
>
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
> if (!pos)
> return -EIO;
>
> @@ -102,6 +102,12 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
> return 0;
> }
>
> +int pci_aer_init(struct pci_dev *dev)
> +{
> + dev->aer_cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + return pci_cleanup_aer_error_status_regs(dev);
> +}
> +
> /**
> * add_error_device - list device to be handled
> * @e_info: pointer to error info
> @@ -158,7 +164,7 @@ static bool is_error_source(struct pci_dev *dev, struct aer_err_info *e_info)
> if (!(reg16 & PCI_EXP_AER_FLAGS))
> return false;
>
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
> if (!pos)
> return false;
>
> @@ -555,7 +561,7 @@ static void handle_error_source(struct pcie_device *aerdev,
> * Correctable error does not need software intervention.
> * No need to go through error recovery process.
> */
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
> if (pos)
> pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS,
> info->status);
> @@ -647,7 +653,7 @@ static int get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
> info->status = 0;
> info->tlp_header_valid = 0;
>
> - pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
> + pos = dev->aer_cap;
>
> /* The device might not support AER */
> if (!pos)
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 93f280d..1575724 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1666,7 +1666,8 @@ static void pci_init_capabilities(struct pci_dev *dev)
> /* Enable ACS P2P upstream forwarding */
> pci_enable_acs(dev);
>
> - pci_cleanup_aer_error_status_regs(dev);
> + /* Advanced Error Reporting */
> + pci_aer_init(dev);
> }
>
> /*
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 7a320ca..306e5c6 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -268,6 +268,9 @@ struct pci_dev {
> unsigned int class; /* 3 bytes: (base,sub,prog-if) */
> u8 revision; /* PCI revision, low byte of class word */
> u8 hdr_type; /* PCI header type (`multi' flag masked out) */
> +#ifdef CONFIG_PCIEAER
> + u16 aer_cap; /* AER capability offset */
> +#endif
> u8 pcie_cap; /* PCIe capability offset */
> u8 msi_cap; /* MSI capability offset */
> u8 msix_cap; /* MSI-X capability offset */
> @@ -1390,9 +1393,11 @@ static inline bool pcie_aspm_support_enabled(void) { return false; }
> #ifdef CONFIG_PCIEAER
> void pci_no_aer(void);
> bool pci_aer_available(void);
> +int pci_aer_init(struct pci_dev *dev);
> #else
> static inline void pci_no_aer(void) { }
> static inline bool pci_aer_available(void) { return false; }
> +static inline int pci_aer_init(struct pci_dev *d) { return -ENODEV; }
> #endif
>
> #ifdef CONFIG_PCIE_ECRC
> --
> 2.7.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-09-27 21:05 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-27 20:23 [PATCHv3 0/5] PCI access on removed devices Keith Busch
2016-09-27 20:23 ` [PATCHv3 1/5] mips/pci: Reduce stack frame usage Keith Busch
2016-09-28 13:43 ` Atsushi Nemoto
2016-09-27 20:23 ` [PATCHv3 2/5] pci: Add is_removed state Keith Busch
2016-10-21 15:37 ` Lukas Wunner
2016-10-21 16:15 ` Keith Busch
2016-10-21 16:36 ` Lukas Wunner
2016-10-21 16:20 ` Lukas Wunner
2016-10-21 17:08 ` Keith Busch
2016-10-21 16:58 ` Lukas Wunner
2016-10-21 17:30 ` Keith Busch
2016-09-27 20:23 ` [PATCHv3 3/5] pci: No config access for removed devices Keith Busch
2016-09-27 20:23 ` [PATCHv3 4/5] pcie/aer: Cache capability position Keith Busch
2016-09-27 21:05 ` Bjorn Helgaas [this message]
2016-09-27 20:23 ` [PATCHv3 5/5] pci/msix: Skip disabling removed devices Keith Busch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160927210546.GB20252@localhost \
--to=helgaas@kernel.org \
--cc=bhelgaas@google.com \
--cc=keith.busch@intel.com \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=ralf@linux-mips.org \
--cc=wzhang@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).