From: Lukas Wunner <lukas@wunner.de>
To: Prarit Bhargava <prarit@redhat.com>
Cc: linux-pci@vger.kernel.org,
Alex Williamson <alex.williamson@redhat.com>,
David Arcari <darcari@redhat.com>,
Myron Stowe <mstowe@redhat.com>,
Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: [RFE PATCH] pci: Do not enable intx on MSI-capable devices on shutdown
Date: Mon, 24 Oct 2016 11:44:45 +0200 [thread overview]
Message-ID: <20161024094445.GA5144@wunner.de> (raw)
In-Reply-To: <1477052083-13815-1-git-send-email-prarit@redhat.com>
On Fri, Oct 21, 2016 at 08:14:43AM -0400, Prarit Bhargava wrote:
> The following unhandled IRQ warning is seen during shutdown:
>
> irq 16: nobody cared (try booting with the "irqpoll" option)
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1
> Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/01/2016
> 0000000000000000 ffff88041f803e70 ffffffff81333bd5 ffff88041cb78200
> ffff88041cb7829c ffff88041f803e98 ffffffff810d9465 ffff88041cb78200
> 0000000000000000 0000000000000028 ffff88041f803ed0 ffffffff810d97bf
> Call Trace:
> <IRQ> [<ffffffff81333bd5>] dump_stack+0x63/0x8e
> [<ffffffff810d9465>] __report_bad_irq+0x35/0xd0
> [<ffffffff810d97bf>] note_interrupt+0x20f/0x260
> [<ffffffff810d6b35>] handle_irq_event_percpu+0x45/0x60
> [<ffffffff810d6b7c>] handle_irq_event+0x2c/0x50
> [<ffffffff810da31a>] handle_fasteoi_irq+0x8a/0x150
> [<ffffffff8102edfb>] handle_irq+0xab/0x130
> [<ffffffff81082391>] ? _local_bh_enable+0x21/0x50
> [<ffffffff817064ad>] do_IRQ+0x4d/0xd0
> [<ffffffff81704502>] common_interrupt+0x82/0x82
> <EOI> [<ffffffff815d0181>] ? cpuidle_enter_state+0xc1/0x280
> [<ffffffff815d0174>] ? cpuidle_enter_state+0xb4/0x280
> [<ffffffff815d0377>] cpuidle_enter+0x17/0x20
> [<ffffffff810bf660>] cpu_startup_entry+0x220/0x3a0
> [<ffffffff816f6da7>] rest_init+0x77/0x80
> [<ffffffff81d8e147>] start_kernel+0x495/0x4a2
> [<ffffffff81d8daa0>] ? set_init_arg+0x55/0x55
> [<ffffffff81d8d120>] ? early_idt_handler_array+0x120/0x120
> [<ffffffff81d8d5d6>] x86_64_start_reservations+0x2a/0x2c
> [<ffffffff81d8d715>] x86_64_start_kernel+0x13d/0x14c
>
> pci_device_shutdown() is called on each PCI device, and does
>
> if (drv && drv->shutdown)
> drv->shutdown(pci_dev);
> pci_msi_shutdown(pci_dev);
> pci_msix_shutdown(pci_dev);
>
> The pci_msi_shutdown() and pci_msix_shutdown() functions both call
> pci_intx_for_msi() which enables the intx interrupt independent of the driver.
> The driver still thinks it is using MSI/X and the result is the above stack
> trace.
>
> We have seen this at Red Hat on various drivers: nouveau, ahci, and pcieport
> (so far). Google search for "unhandled irq 16" yields many results reporting
> similar behavior during shutdown indicating that this problem is widespread.
I've occasionally seen this on an Ivy Bridge MacBook Pro as well,
also on IRQ 16. It's been a major annoyance, so thanks for looking
into this.
Why is this always occurring on IRQ 16, not on any others? On my
MacBook Pro IRQ 16 is used by a root port (00:1c.0, pcieport),
an Ethernet controller below that root port (02:00.0, tg3) and
a Thunderbolt hotplug bridge (06:03.0, pcieport). I've never seen
these spurious interrupts on any other IRQ.
The patch looks good, I'm wondering though if it works correctly
with PCI devices passed through to a VM: When the VM is shut down,
it won't enable INTx any longer. Not sure if this can cause problems
for the host.
Thanks,
Lukas
> I can cause this to happen on a "stable" system by adding a 3 second delay in
> pci_device_shutdown() which causes the number of spurious interrupts to exceed
> the 100000 limit and display the warning above. Also note that by adding the
> 3 second delay, NVIDIA devices with device ID 0x0FF* hit this problem 100% of
> the time.
>
> darcari noticed that removing the pci_intx_for_msi() call resulted in a
> stable system. After further discussions with Myron and Alex, Alex came up
> idea of keeping the intx disabled during shutdown implemented below.
>
> ----8<----
>
> The following unhandled IRQ warning is seen during shutdown:
>
> irq 16: nobody cared (try booting with the "irqpoll" option)
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1
> Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/01/2016
> 0000000000000000 ffff88041f803e70 ffffffff81333bd5 ffff88041cb78200
> ffff88041cb7829c ffff88041f803e98 ffffffff810d9465 ffff88041cb78200
> 0000000000000000 0000000000000028 ffff88041f803ed0 ffffffff810d97bf
> Call Trace:
> <IRQ> [<ffffffff81333bd5>] dump_stack+0x63/0x8e
> [<ffffffff810d9465>] __report_bad_irq+0x35/0xd0
> [<ffffffff810d97bf>] note_interrupt+0x20f/0x260
> [<ffffffff810d6b35>] handle_irq_event_percpu+0x45/0x60
> [<ffffffff810d6b7c>] handle_irq_event+0x2c/0x50
> [<ffffffff810da31a>] handle_fasteoi_irq+0x8a/0x150
> [<ffffffff8102edfb>] handle_irq+0xab/0x130
> [<ffffffff81082391>] ? _local_bh_enable+0x21/0x50
> [<ffffffff817064ad>] do_IRQ+0x4d/0xd0
> [<ffffffff81704502>] common_interrupt+0x82/0x82
> <EOI> [<ffffffff815d0181>] ? cpuidle_enter_state+0xc1/0x280
> [<ffffffff815d0174>] ? cpuidle_enter_state+0xb4/0x280
> [<ffffffff815d0377>] cpuidle_enter+0x17/0x20
> [<ffffffff810bf660>] cpu_startup_entry+0x220/0x3a0
> [<ffffffff816f6da7>] rest_init+0x77/0x80
> [<ffffffff81d8e147>] start_kernel+0x495/0x4a2
> [<ffffffff81d8daa0>] ? set_init_arg+0x55/0x55
> [<ffffffff81d8d120>] ? early_idt_handler_array+0x120/0x120
> [<ffffffff81d8d5d6>] x86_64_start_reservations+0x2a/0x2c
> [<ffffffff81d8d715>] x86_64_start_kernel+0x13d/0x14c
>
> This occurs because the pci_msi_shutdown() and pci_msix_shutdown() functions
> enable the legacy intx interrupt even though the device and driver were not
> configured for legacy intx.
>
> This patch blocks the enabling of intx during system shutdown or reboot.
>
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: David Arcari <darcari@redhat.com>
> Cc: Myron Stowe <mstowe@redhat.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/msi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index bfdd0744b686..915cc29797f9 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -910,7 +910,8 @@ void pci_msi_shutdown(struct pci_dev *dev)
> desc = first_pci_msi_entry(dev);
>
> pci_msi_set_enable(dev, 0);
> - pci_intx_for_msi(dev, 1);
> + if (system_state == SYSTEM_RUNNING || system_state == SYSTEM_BOOTING)
> + pci_intx_for_msi(dev, 1);
> dev->msi_enabled = 0;
>
> /* Return the device with MSI unmasked as initial states */
> @@ -1024,7 +1025,8 @@ void pci_msix_shutdown(struct pci_dev *dev)
> }
>
> pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> - pci_intx_for_msi(dev, 1);
> + if (system_state == SYSTEM_RUNNING || system_state == SYSTEM_BOOTING)
> + pci_intx_for_msi(dev, 1);
> dev->msix_enabled = 0;
> pcibios_alloc_irq(dev);
> }
> --
> 1.7.9.3
next prev parent reply other threads:[~2016-10-24 9:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-21 12:14 [RFE PATCH] pci: Do not enable intx on MSI-capable devices on shutdown Prarit Bhargava
2016-10-24 9:44 ` Lukas Wunner [this message]
2016-10-24 13:52 ` Prarit Bhargava
2016-10-25 18:08 ` Keith Busch
2016-10-25 19:08 ` Prarit Bhargava
2016-10-25 22:16 ` Keith Busch
2016-10-26 14:00 ` Prarit Bhargava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161024094445.GA5144@wunner.de \
--to=lukas@wunner.de \
--cc=alex.williamson@redhat.com \
--cc=bhelgaas@google.com \
--cc=darcari@redhat.com \
--cc=linux-pci@vger.kernel.org \
--cc=mstowe@redhat.com \
--cc=prarit@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).