From: Lukas Wunner <lukas@wunner.de>
To: Joerg Roedel <joro@8bytes.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Daniel Drake <drake@endlessm.com>,
Alexander Deucher <Alexander.Deucher@amd.com>,
Samuel Sieb <samuel@sieb.net>,
David Woodhouse <dwmw2@infradead.org>,
Joerg Roedel <jroedel@suse.de>,
Paul Menzel <pmenzel@molgen.mpg.de>
Subject: Re: [PATCH v2] PCI: Add ATS-disable quirk for AMD Stoney GPUs
Date: Sat, 8 Apr 2017 09:41:07 +0200 [thread overview]
Message-ID: <20170408074107.GA3585@wunner.de> (raw)
In-Reply-To: <1491575538-22694-1-git-send-email-joro@8bytes.org>
On Fri, Apr 07, 2017 at 04:32:18PM +0200, Joerg Roedel wrote:
> From: Joerg Roedel <jroedel@suse.de>
>
> ATS is broken on this hardware and causes IOMMU stalls and
> system failure. Disable ATS on these devices to make them
> usable again with IOMMU enabled.
AMD Stoney Ridge is an x86 CPU + GPU combo and this quirk pertains
to the GPU, right?
In that case the quirk should go to arch/x86. Paul Menzel (+cc)
has just complained on linux-pci@ that final fixups are taking half
a second, and I think that could be reduced if more efforts were
spent to move arch-specific quirks out of the catch-all in
drivers/pci/quirks.c.
Thanks,
Lukas
>
> Note that the commit in the Fixes-tag is not buggy, it
> just uncovers the problem in the hardware by increasing
> the ATS-flush rate.
>
> Fixes: b1516a14657a ('iommu/amd: Implement flush queue')
> Signed-off-by: Joerg Roedel <jroedel@suse.de>
> ---
> drivers/pci/quirks.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 6736836..7cbe316 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -4634,3 +4634,22 @@ static void quirk_no_aersid(struct pci_dev *pdev)
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid);
> DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid);
> +
> +#ifdef CONFIG_PCI_ATS
> +/*
> + * Some devices have a broken ATS implementation causing IOMMU stalls.
> + * Don't use ATS for those devices.
> + */
> +static void quirk_disable_ats(struct pci_dev *pdev)
> +{
> + /*
> + * Set pdev->ats_cap = 0 to make pci_enable_ats() bail out
> + * early.
> + */
> + dev_info(&pdev->dev, "QUIRK: Disabling ATS");
> + pdev->ats_cap = 0;
> +}
> +
> +/* AMD Stoney platform GPU */
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_disable_ats);
> +#endif /* CONFIG_PCI_ATS */
> --
> 1.9.1
>
next prev parent reply other threads:[~2017-04-08 7:40 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-07 14:32 [PATCH v2] PCI: Add ATS-disable quirk for AMD Stoney GPUs Joerg Roedel
2017-04-07 16:46 ` Deucher, Alexander
2017-05-04 10:21 ` David Woodhouse
2017-05-04 14:41 ` Deucher, Alexander
2017-05-23 19:54 ` Deucher, Alexander
2017-05-24 8:44 ` Joerg Roedel
2017-05-24 10:38 ` David Woodhouse
2017-05-24 12:56 ` Deucher, Alexander
2017-05-26 6:48 ` Samuel Sieb
2017-05-26 11:57 ` Deucher, Alexander
2017-05-26 12:54 ` David Woodhouse
2017-05-26 15:59 ` Deucher, Alexander
2017-04-08 7:41 ` Lukas Wunner [this message]
2017-04-20 12:11 ` Joerg Roedel
2017-06-15 17:12 ` Bjorn Helgaas
2017-06-15 14:04 ` Joerg Roedel
2017-06-15 17:01 ` Samuel Sieb
2017-06-15 18:13 ` Deucher, Alexander
2017-06-15 19:15 ` Bjorn Helgaas
2017-06-16 16:29 ` Joerg Roedel
2017-07-10 16:53 ` Bjorn Helgaas
2017-07-11 11:49 ` Joerg Roedel
2017-07-11 19:08 ` Deucher, Alexander
2017-07-13 2:56 ` Bjorn Helgaas
2017-08-29 20:02 ` Samuel Sieb
2017-08-29 20:49 ` Bjorn Helgaas
2017-08-30 11:44 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170408074107.GA3585@wunner.de \
--to=lukas@wunner.de \
--cc=Alexander.Deucher@amd.com \
--cc=bhelgaas@google.com \
--cc=drake@endlessm.com \
--cc=dwmw2@infradead.org \
--cc=joro@8bytes.org \
--cc=jroedel@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=pmenzel@molgen.mpg.de \
--cc=samuel@sieb.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).