[PATCH v3 0/1] ARM64/PCI: ACPI NUMA node set-up

[PATCH v3 0/1] ARM64/PCI: ACPI NUMA node set-up

[Lorenzo Pieralisi]

This patch series is v3 of a previous posting:

v2 -> v3

- Dropped generic approach
  # It was not consistent between ACPI and DT and not reusable on x86/IA64
- Trimmed the series to one patch ARM64 specific, three-line patch fixes
  the issue
- Rebased against v4.12-rc2
- Dropped RFC/RFT tag

v2: https://lkml.org/lkml/2017/5/15/433

v1 -> v2:

- Added missing call to acpi_pci_bus_find_numa_node()
- Rebased against v4.12-rc1

v1: https://lkml.org/lkml/2017/4/26/211

--- Original Cover Letter --

On the ARM64 architecture, the arch specific PCI pcibus_to_node() callback
can be triggered on struct pci_bus.sysdata structures that carry host
bridge specific data through different structures layout (ie sysdata
pointer points at different structs for different host bridges), therefore
it is not possible to have a unified pcibus_to_node() implementation.

Given that the device NUMA node is a property of the struct pci_bus (and
its associated struct device), move the struct pci_bus node assignment to
generic PCI code, where according to the platform firmware the NUMA node
for the device backing the struct pci_bus is retrieved and propagated
through the PCI bus hierarchy.

Lorenzo Pieralisi (1):
  ARM64/PCI: Set root bus NUMA node on ACPI systems

 arch/arm64/kernel/pci.c | 3 +++
 1 file changed, 3 insertions(+)

-- 
2.10.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/1] ARM64/PCI: Set root bus NUMA node on ACPI systems

[Lorenzo Pieralisi]

PCI core requires the NUMA node for the struct pci_host_bridge.dev to
be set by using the pcibus_to_node(struct pci_bus*) API, that on ARM64
systems relies on the struct pci_host_bridge->bus.dev NUMA node.

The struct pci_host_bridge.dev NUMA node is then propagated through
the PCI device hierarchy as PCI devices (and bridges) are enumerated
under it.

Therefore, in order to set-up the PCI NUMA hierarchy appropriately, the
struct pci_host_bridge->bus.dev NUMA node must be set before core
code calls pcibus_to_node(struct pci_bus*) on it so that PCI core can
retrieve the NUMA node for the struct pci_host_bridge.dev device and can
propagate it through the PCI bus tree.

On ARM64 ACPI based systems the struct pci_host_bridge->bus.dev NUMA
node can be set-up in pcibios_root_bridge_prepare() by parsing the root
bridge ACPI device firmware binding.

Add code to the pcibios_root_bridge_prepare() that, when booting with
ACPI, parse the root bridge ACPI device companion NUMA binding and set
the corresponding struct pci_host_bridge->bus.dev NUMA node
appropriately.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm64/kernel/pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 4f0e3eb..1082834 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -108,7 +108,10 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 	if (!acpi_disabled) {
 		struct pci_config_window *cfg = bridge->bus->sysdata;
 		struct acpi_device *adev = to_acpi_device(cfg->parent);
+		struct device *bus_dev = &bridge->bus->dev;
+
 		ACPI_COMPANION_SET(&bridge->dev, adev);
+		set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
 	}
 
 	return 0;
-- 
2.10.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/1] ARM64/PCI: Set root bus NUMA node on ACPI systems

[Robert Richter]

On 24.05.17 18:22:19, Lorenzo Pieralisi wrote:
> PCI core requires the NUMA node for the struct pci_host_bridge.dev to
> be set by using the pcibus_to_node(struct pci_bus*) API, that on ARM64
> systems relies on the struct pci_host_bridge->bus.dev NUMA node.
> 
> The struct pci_host_bridge.dev NUMA node is then propagated through
> the PCI device hierarchy as PCI devices (and bridges) are enumerated
> under it.
> 
> Therefore, in order to set-up the PCI NUMA hierarchy appropriately, the
> struct pci_host_bridge->bus.dev NUMA node must be set before core
> code calls pcibus_to_node(struct pci_bus*) on it so that PCI core can
> retrieve the NUMA node for the struct pci_host_bridge.dev device and can
> propagate it through the PCI bus tree.
> 
> On ARM64 ACPI based systems the struct pci_host_bridge->bus.dev NUMA
> node can be set-up in pcibios_root_bridge_prepare() by parsing the root
> bridge ACPI device firmware binding.
> 
> Add code to the pcibios_root_bridge_prepare() that, when booting with
> ACPI, parse the root bridge ACPI device companion NUMA binding and set
> the corresponding struct pci_host_bridge->bus.dev NUMA node
> appropriately.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>

Looks good.

Reviewed-by: Robert Richter <rrichter@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>

Thanks,

-Robert

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 1/1] ARM64/PCI: Set root bus NUMA node on ACPI systems

[Will Deacon]

On Wed, May 24, 2017 at 06:22:19PM +0100, Lorenzo Pieralisi wrote:
> PCI core requires the NUMA node for the struct pci_host_bridge.dev to
> be set by using the pcibus_to_node(struct pci_bus*) API, that on ARM64
> systems relies on the struct pci_host_bridge->bus.dev NUMA node.
> 
> The struct pci_host_bridge.dev NUMA node is then propagated through
> the PCI device hierarchy as PCI devices (and bridges) are enumerated
> under it.
> 
> Therefore, in order to set-up the PCI NUMA hierarchy appropriately, the
> struct pci_host_bridge->bus.dev NUMA node must be set before core
> code calls pcibus_to_node(struct pci_bus*) on it so that PCI core can
> retrieve the NUMA node for the struct pci_host_bridge.dev device and can
> propagate it through the PCI bus tree.
> 
> On ARM64 ACPI based systems the struct pci_host_bridge->bus.dev NUMA
> node can be set-up in pcibios_root_bridge_prepare() by parsing the root
> bridge ACPI device firmware binding.
> 
> Add code to the pcibios_root_bridge_prepare() that, when booting with
> ACPI, parse the root bridge ACPI device companion NUMA binding and set
> the corresponding struct pci_host_bridge->bus.dev NUMA node
> appropriately.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> ---
>  arch/arm64/kernel/pci.c | 3 +++
>  1 file changed, 3 insertions(+)

Thanks, I'll queue this with Robert's tags.

Will

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel