From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: linux-pci@vger.kernel.org, bhelgaas@google.com
Cc: Andrew Lunn <andrew@lunn.ch>,
Gabriele Paoloni <gabriele.paoloni@huawei.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Will Deacon <will.deacon@arm.com>,
Michal Simek <michal.simek@xilinx.com>,
Thierry Reding <thierry.reding@gmail.com>,
Tanmay Inamdar <tinamdar@apm.com>,
Matthew Minter <matt@masarand.com>, Rob Herring <robh@kernel.org>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Pratyush Anand <pratyush.anand@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Murali Karicheri <m-karicheri2@ti.com>,
Linus Walleij <linus.walleij@linaro.org>,
Jason Cooper <jason@lakedaemon.net>,
Arnd Bergmann <arnd@arndb.de>,
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>,
Simon Horman <horms@verge.net.au>,
Mingkai Hu <mingkai.hu@freescale.com>,
linux-arm-kernel@lists.infradead.org,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Jingoo Han <jingoohan1@gmail.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Minghuan Lian <minghuan.Lian@freescale.com>,
Zhou Wang <wangzhou1@hisilicon.com>,
Roy Zang <tie-fei.zang@freescale.com>
Subject: Re: [RFT PATCH v2 29/42] ARM: PCI: Remove pci_fixup_irqs() call for bios32 host controllers
Date: Sat, 1 Jul 2017 15:06:30 +0100 [thread overview]
Message-ID: <20170701140629.GC8977@red-moon> (raw)
In-Reply-To: <20170608141342.2018-30-lorenzo.pieralisi@arm.com>
Hi Bjorn,
On Thu, Jun 08, 2017 at 03:13:29PM +0100, Lorenzo Pieralisi wrote:
> Legacy PCI host controllers (ie host controllers that set-up the PCI bus
> through the ARM pci_common_init() API) are currently relying on
> pci_fixup_irqs() to assign legacy PCI irqs to devices. This is not ideal
> in that pci_fixup_irqs() assign IRQs for all PCI devices present in a
> given system some of which may well be enabled by the time
> pci_fixup_irqs() is called (ie a system with multiple host controllers).
> With the introduction of struct pci_host_bridge.(*map_irq) pointer it is
> possible to assign IRQs for all devices originating from a PCI host
> bridge at probe time; this is implemented through pci_assign_irq() that
> relies on the struct pci_host_bridge.map_irq pointer to map IRQ for a
> given device.
>
> The benefits this brings are twofold:
>
> - the IRQ for a device is assigned once at probe time
> - the IRQ assignment works also for hotplugged devices
>
> Remove pci_fixup_irqs() call from bios32 code and rely on
> pci_assign_irq() to carry out the IRQ mapping at device probe
> time.
>
> The map_irq() and swizzle_irq() struct pci_host_bridge callbacks are
> set-up in the struct pci_host_bridge created in the bios32
> pcibios_init_hw() function and mach-* code paths (for PCI mach
> implementations that require a specific struct hw_pci.(*scan) function
> callback).
>
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Andrew Lunn <andrew@lunn.ch>
> ---
> arch/arm/kernel/bios32.c | 4 ++--
> arch/arm/mach-dove/pcie.c | 18 ++++++++++--------
> arch/arm/mach-iop13xx/pci.c | 2 ++
> arch/arm/mach-orion5x/pci.c | 28 +++++++++++++++-------------
> 4 files changed, 29 insertions(+), 23 deletions(-)
As I mentioned to you, this patch is incomplete and needs an upgrade
(ie I misread how Orion and the gazillions board file that go with
it to map irqs - apologies but it is very hard to untangle).
I am inlining below an incremental patch to be folded in commit:
feaec00e757a ("ARM/PCI: Remove pci_fixup_irqs() call for bios32 host
controllers")
in your pci/irq-fixups branch, or if you prefer I can send you the
resulting squashed-in patch to replace this one, as you prefer.
I understand timing is tight I am doing all I can to fix this series
up and make 4.13.
Please let me know how I can help, thank you !
Lorenzo
-- >8 --
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index da201a2..56dc1a3 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -484,6 +484,9 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
break;
}
+ bridge->map_irq = pcibios_map_irq;
+ bridge->swizzle_irq = pcibios_swizzle;
+
if (hw->scan)
ret = hw->scan(nr, bridge);
else {
@@ -494,8 +497,6 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
bridge->busnr = sys->busnr;
bridge->ops = hw->ops;
bridge->msi = hw->msi_ctrl;
- bridge->map_irq = pcibios_map_irq;
- bridge->swizzle_irq = pcibios_swizzle;
bridge->align_resource =
hw->align_resource;
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 8d54a67..dfb62f3 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -152,14 +152,6 @@ static void rc_pci_fixup(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- struct pci_sys_data *sys = dev->sysdata;
- struct pcie_port *pp = sys->private_data;
-
- return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
-}
-
static int __init
dove_pcie_scan_bus(int nr, struct pci_host_bridge *bridge)
{
@@ -175,12 +167,18 @@ dove_pcie_scan_bus(int nr, struct pci_host_bridge *bridge)
bridge->sysdata = sys;
bridge->busnr = sys->busnr;
bridge->ops = &pcie_ops;
- bridge->map_irq = dove_pcie_map_irq;
- bridge->swizzle_irq = pci_common_swizzle;
return pci_scan_root_bus_bridge(bridge);
}
+static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pci_sys_data *sys = dev->sysdata;
+ struct pcie_port *pp = sys->private_data;
+
+ return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
static struct hw_pci dove_pci __initdata = {
.nr_controllers = 2,
.setup = dove_pcie_setup,
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 3c51a9b..070d92a 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -532,7 +532,6 @@ int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge)
bridge->dev.parent = NULL;
bridge->sysdata = sys;
bridge->busnr = sys->busnr;
- bridge->swizzle_irq = pci_common_swizzle;
switch (which_atu) {
case IOP13XX_INIT_ATU_ATUX:
@@ -548,7 +547,6 @@ int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge)
break;
case IOP13XX_INIT_ATU_ATUE:
bridge->ops = &iop13xx_atue_ops;
- bridge->map_irq = iop13xx_pcie_map_irq;
ret = pci_scan_root_bus_bridge(bridge);
if (!ret)
pci_bus_atue = bridge->bus;
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 0f1c343..76951bf 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -555,19 +555,6 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
return 0;
}
-int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int bus = dev->bus->number;
-
- /*
- * PCIe endpoint?
- */
- if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
- return IRQ_ORION5X_PCIE0_INT;
-
- return -1;
-}
-
int __init orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge)
{
struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
@@ -576,8 +563,6 @@ int __init orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge)
bridge->dev.parent = NULL;
bridge->sysdata = sys;
bridge->busnr = sys->busnr;
- bridge->map_irq = orion5x_pci_map_irq;
- bridge->swizzle_irq = pci_common_swizzle;
if (nr == 0) {
bridge->ops = &pcie_ops;
@@ -592,3 +577,16 @@ int __init orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge)
BUG();
return -ENODEV;
}
+
+int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int bus = dev->bus->number;
+
+ /*
+ * PCIe endpoint?
+ */
+ if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
+ return IRQ_ORION5X_PCIE0_INT;
+
+ return -1;
+}
--
2.10.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-07-01 14:06 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-08 14:13 [RFT PATCH v2 00/42] PCI: ARM/ARM64: remove pci_fixup_irqs() usage Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 01/42] PCI: xilinx-nwl: Remove nwl_pcie_enable_msi() unused bus parameter Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 02/42] drivers: pci: host: iproc: Convert link check to raw PCI config accessors Lorenzo Pieralisi
[not found] ` <0eb77019-9945-592c-375d-e2de742b3237@broadcom.com>
2017-06-08 16:36 ` Lorenzo Pieralisi
2017-06-11 4:12 ` Oza Oza
2017-06-12 16:13 ` Lorenzo Pieralisi
[not found] ` <CAMSpPPc0uwV0JZYkegrCaemuoJ-wfWwkSXd7TMtFwENoLRXdBQ@mail.gmail.com>
[not found] ` <403daa9b-c0f6-971d-9312-ef103460d738@broadcom.com>
[not found] ` <CAMSpPPdDLjRURZowWAzSvagmmhmojwYFYoHVu3xYcH6i-guviQ@mail.gmail.com>
[not found] ` <3d90daa1-7090-337a-b5c1-967b7eaeb2d9@broadcom.com>
2017-06-14 13:39 ` Lorenzo Pieralisi
2017-06-21 14:39 ` Oza Oza
[not found] ` <CAMSpPPdzmQBOvhz2Cx+TnnNoX-N-0cr92O07GTzWwp1TKidPcw@mail.gmail.com>
2017-07-19 17:48 ` Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 03/42] drivers: pci: host: ftpci100: convert IRQ masking " Lorenzo Pieralisi
2017-06-16 9:05 ` Linus Walleij
2017-06-08 14:13 ` [RFT PATCH v2 04/42] PCI: Initialize bridge release function at bridge allocation Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 05/42] PCI: Add pci_free_host_bridge interface Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 06/42] PCI: Add devm_pci_alloc_host_bridge() interface Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 07/42] drivers: pci: host: ftpci100: Fix host bridge memory leakage Lorenzo Pieralisi
2017-06-16 9:02 ` Linus Walleij
2017-06-08 14:13 ` [RFT PATCH v2 08/42] drivers: pci: host: tegra: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 09/42] PCI: Introduce pci_scan_root_bus_bridge() Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 10/42] PCI: Make pci_register_host_bridge() PCI core internal Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 11/42] ARM: PCI: bios32: Convert PCI scan API to pci_scan_root_bus_bridge() Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 12/42] PCI: designware: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 13/42] PCI: aardvark: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 14/42] PCI: rcar: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 15/42] PCI: iproc: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 16/42] PCI: versatile: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 17/42] PCI: altera: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 18/42] PCI: xilinx: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 19/42] PCI: xgene: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 20/42] PCI: host-common: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 21/42] PCI: rockchip: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 22/42] PCI: xilinx-nwl: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 23/42] PCI: Remove pci_scan_root_bus_msi() Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 24/42] PCI: Build setup-irq.o on all arches Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 25/42] PCI: Add IRQ mapping function pointers to pci_host_bridge struct Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 26/42] PCI: Add pci_assign_irq() function and have pci_fixup_irqs() use it Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 27/42] OF/PCI: Update of_irq_parse_and_map_pci() comment Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 28/42] PCI: Add a call to pci_assign_irq() in pci_device_probe() Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 29/42] ARM: PCI: Remove pci_fixup_irqs() call for bios32 host controllers Lorenzo Pieralisi
2017-07-01 14:06 ` Lorenzo Pieralisi [this message]
2017-07-02 21:19 ` Bjorn Helgaas
2017-07-03 10:26 ` Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 30/42] PCI: tegra: Drop pci_fixup_irqs() Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 31/42] PCI: xilinx: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 32/42] PCI: rcar: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 33/42] PCI: iproc: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 34/42] PCI: designware-host: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 35/42] PCI: ftpci100: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 36/42] PCI: host-common: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 37/42] PCI: versatile: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 38/42] PCI: altera: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 39/42] PCI: xgene: Move to struct pci_host_bridge IRQ mapping functions Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 40/42] PCI: rockchip: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 41/42] PCI: xilinx-nwl: " Lorenzo Pieralisi
2017-06-08 14:13 ` [RFT PATCH v2 42/42] ARM64: PCI: Drop DT IRQ allocation from pcibios_alloc_irq() Lorenzo Pieralisi
2017-06-12 15:45 ` [RFT PATCH v2 00/42] PCI: ARM/ARM64: remove pci_fixup_irqs() usage Will Deacon
2017-06-12 16:20 ` Lorenzo Pieralisi
2017-06-19 23:12 ` Bjorn Helgaas
2017-06-20 14:44 ` Lorenzo Pieralisi
2017-06-21 8:39 ` Linus Walleij
2017-06-21 9:50 ` Lorenzo Pieralisi
2017-06-21 10:30 ` Lorenzo Pieralisi
2017-06-21 10:45 ` Lorenzo Pieralisi
2017-06-21 14:51 ` Linus Walleij
2017-06-21 15:14 ` Linus Walleij
2017-06-21 15:41 ` Lorenzo Pieralisi
2017-06-21 16:28 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170701140629.GC8977@red-moon \
--to=lorenzo.pieralisi@arm.com \
--cc=Joao.Pinto@synopsys.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=bharat.kumar.gogada@xilinx.com \
--cc=bhelgaas@google.com \
--cc=gabriele.paoloni@huawei.com \
--cc=horms@verge.net.au \
--cc=jason@lakedaemon.net \
--cc=jingoohan1@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m-karicheri2@ti.com \
--cc=matt@masarand.com \
--cc=michal.simek@xilinx.com \
--cc=minghuan.Lian@freescale.com \
--cc=mingkai.hu@freescale.com \
--cc=pratyush.anand@gmail.com \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=svarbanov@mm-sol.com \
--cc=thierry.reding@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=tie-fei.zang@freescale.com \
--cc=tinamdar@apm.com \
--cc=wangzhou1@hisilicon.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).