Re: [PATCH kernel v4 4/6] iommu: Set PCI_BUS_FLAGS_MSI_REMAP on iommu driver initialization

[Joerg Roedel <joro@8bytes.org>]

On Wed, Jul 19, 2017 at 08:02:04PM +1000, Alexey Kardashevskiy wrote:
> On 11/07/17 05:23, Bjorn Helgaas wrote:
> >> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> >> index cf7ca7e70777..0b5881ddca09 100644
> >> --- a/drivers/iommu/iommu.c
> >> +++ b/drivers/iommu/iommu.c
> >> @@ -1063,6 +1063,14 @@ static int add_iommu_group(struct device *dev, void *data)
> >>         const struct iommu_ops *ops = cb->ops;
> >>         int ret;
> >>
> >> +       /*
> >> +        * Set PCI_BUS_FLAGS_MSI_REMAP for all PCI buses when IOMMU
> >> +        * have capability of IRQ remapping.
> >> +        */
> >> +       if (dev_is_pci(dev) && ops->capable &&
> >> +                       ops->capable(IOMMU_CAP_INTR_REMAP))
> >> +               to_pci_dev(dev)->bus->bus_flags |= PCI_BUS_FLAGS_MSI_REMAP;

We avoid bus-specific hacks in generic iommu code. This has to be done
in bus-specific iommu-group setup code.

> 1. PCI_BUS_FLAGS_MSI_REMAP on a PCI bus - MSIX isolation is not really a
> PCI bus property and it is "like a wart".

This one is at least debatable. It could be a property of the bus.

> 2. Introduce "flags" in iommu_group and define IOMMU_GROUP_MSIX_ISOLATED
> and set it when an IOMMU group is created; VFIO-PCI has ways to get to the
> group and read the flag.

That's the best option I see here.

> 3. Create IOMMU_DOMAIN_UNMANAGED IOMMU domains for PPC64/powernv IOMMU
> groups and only define capable() hook to report IOMMU_CAP_INTR_REMAP;
> others already use these IOMMU domains. VFIO-PCI's mmap() hook could then
> check the capability via iommu_capable(bus). The problems is as Robin said:
> "iommu_capable() is a fundamentally broken and unworkable interface
> anyway"; however it is still not clear to me why it is unworkable in this
> particular case of isolation checking.

That one is wrong, IRQ remapping is not a property of a domain. A domain
is an abstraction for a device address space. Attaching IRQ information
there is just wrong.



	Joerg