linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
	linux-acpi@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org, Scott Murray <scott@spiteful.org>,
	Lukas Wunner <lukas@wunner.de>,
	Keith Busch <keith.busch@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1] pci: introduce for_each_pci_bridge() helper
Date: Fri, 29 Sep 2017 22:21:23 +0300	[thread overview]
Message-ID: <20170929192123.24817-1-andriy.shevchenko@linux.intel.com> (raw)

It seems often the following pattern has been used

	list_for_each_entry(dev, &bus->devices, bus_list) {
		if (pci_is_bridge(dev)) {
			...
		}
	}

Here for_each_pci_bridge() helper is introduced to make that code better
to write and read by lowing indentation level. It also saves one or few
lines of code in each occurrence.

Convert PCI core parts here at the same time.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/pci/hotplug/acpiphp_glue.c     | 15 ++++++---------
 drivers/pci/hotplug/cpci_hotplug_pci.c |  7 ++-----
 drivers/pci/hotplug/pciehp_pci.c       |  5 ++---
 drivers/pci/hotplug/shpchp_pci.c       |  6 ++----
 drivers/pci/probe.c                    |  6 ++----
 drivers/pci/setup-bus.c                |  7 +++----
 include/linux/pci.h                    |  4 ++++
 7 files changed, 21 insertions(+), 29 deletions(-)

diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 5ed2dcaa8e27..5db6f1839dad 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -462,18 +462,15 @@ static void enable_slot(struct acpiphp_slot *slot)
 	acpiphp_rescan_slot(slot);
 	max = acpiphp_max_busnr(bus);
 	for (pass = 0; pass < 2; pass++) {
-		list_for_each_entry(dev, &bus->devices, bus_list) {
+		for_each_pci_bridge(dev, bus) {
 			if (PCI_SLOT(dev->devfn) != slot->device)
 				continue;
 
-			if (pci_is_bridge(dev)) {
-				max = pci_scan_bridge(bus, dev, max, pass);
-				if (pass && dev->subordinate) {
-					check_hotplug_bridge(slot, dev);
-					pcibios_resource_survey_bus(dev->subordinate);
-					__pci_bus_size_bridges(dev->subordinate,
-							       &add_list);
-				}
+			max = pci_scan_bridge(bus, dev, max, pass);
+			if (pass && dev->subordinate) {
+				check_hotplug_bridge(slot, dev);
+				pcibios_resource_survey_bus(dev->subordinate);
+				__pci_bus_size_bridges(dev->subordinate, &add_list);
 			}
 		}
 	}
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 80c80017197d..f616358fa938 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -286,14 +286,11 @@ int cpci_configure_slot(struct slot *slot)
 	}
 	parent = slot->dev->bus;
 
-	list_for_each_entry(dev, &parent->devices, bus_list) {
-		if (PCI_SLOT(dev->devfn) != PCI_SLOT(slot->devfn))
-			continue;
-		if (pci_is_bridge(dev))
+	for_each_pci_bridge(dev, parent) {
+		if (PCI_SLOT(dev->devfn) == PCI_SLOT(slot->devfn))
 			pci_hp_add_bridge(dev);
 	}
 
-
 	pci_assign_unassigned_bridge_resources(parent->self);
 
 	pci_bus_add_devices(parent);
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 19f30a9f461d..c3af027ee1a6 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -60,9 +60,8 @@ int pciehp_configure_device(struct slot *p_slot)
 		goto out;
 	}
 
-	list_for_each_entry(dev, &parent->devices, bus_list)
-		if (pci_is_bridge(dev))
-			pci_hp_add_bridge(dev);
+	for_each_pci_bridge(dev, parent)
+		pci_hp_add_bridge(dev);
 
 	pci_assign_unassigned_bridge_resources(bridge);
 	pcie_bus_configure_settings(parent);
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index f8cd3a27e351..ea63db58b4b1 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -61,10 +61,8 @@ int shpchp_configure_device(struct slot *p_slot)
 		goto out;
 	}
 
-	list_for_each_entry(dev, &parent->devices, bus_list) {
-		if (PCI_SLOT(dev->devfn) != p_slot->device)
-			continue;
-		if (pci_is_bridge(dev))
+	for_each_pci_bridge(dev, parent) {
+		if (PCI_SLOT(dev->devfn) == p_slot->device)
 			pci_hp_add_bridge(dev);
 	}
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ff94b69738a8..cdc2f83c11c5 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2421,10 +2421,8 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus)
 	}
 
 	for (pass = 0; pass < 2; pass++)
-		list_for_each_entry(dev, &bus->devices, bus_list) {
-			if (pci_is_bridge(dev))
-				max = pci_scan_bridge(bus, dev, max, pass);
-		}
+		for_each_pci_bridge(dev, bus)
+			max = pci_scan_bridge(bus, dev, max, pass);
 
 	/*
 	 * Make sure a hotplug bridge has at least the minimum requested
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 958da7db9033..7ca03407404c 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1921,10 +1921,9 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
 					want additional resources */
 
 	down_read(&pci_bus_sem);
-	list_for_each_entry(dev, &bus->devices, bus_list)
-		if (pci_is_bridge(dev) && pci_has_subordinate(dev))
-				__pci_bus_size_bridges(dev->subordinate,
-							 &add_list);
+	for_each_pci_bridge(dev, bus)
+		if (pci_has_subordinate(dev))
+			__pci_bus_size_bridges(dev->subordinate, &add_list);
 	up_read(&pci_bus_sem);
 	__pci_bus_assign_resources(bus, &add_list, NULL);
 	BUG_ON(!list_empty(&add_list));
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f4f8ee5a7362..3dbe947b4152 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -596,6 +596,10 @@ static inline bool pci_is_bridge(struct pci_dev *dev)
 		dev->hdr_type == PCI_HEADER_TYPE_CARDBUS;
 }
 
+#define for_each_pci_bridge(dev, bus)				\
+	list_for_each_entry(dev, &bus->devices, bus_list)	\
+		if (!pci_is_bridge(dev)) {} else
+
 static inline struct pci_dev *pci_upstream_bridge(struct pci_dev *dev)
 {
 	dev = pci_physfn(dev);
-- 
2.14.2


             reply	other threads:[~2017-09-29 19:21 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-29 19:21 Andy Shevchenko [this message]
2017-10-04 22:24 ` [PATCH v1] pci: introduce for_each_pci_bridge() helper Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170929192123.24817-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=keith.busch@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=scott@spiteful.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).