From: Marek Vasut <marek.vasut@gmail.com>
To: linux-pci@vger.kernel.org
Cc: Dien Pham <dien.pham.ry@rvc.renesas.com>,
Hien Dang <hien.dang.eb@renesas.com>,
Marek Vasut <marek.vasut+renesas@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Simon Horman <horms+renesas@verge.net.au>,
Wolfram Sang <wsa@the-dreams.de>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH] PCI: rcar: Use runtime PM to control controller clock
Date: Wed, 8 Nov 2017 10:19:56 +0100 [thread overview]
Message-ID: <20171108091956.8537-1-marek.vasut+renesas@gmail.com> (raw)
From: Dien Pham <dien.pham.ry@rvc.renesas.com>
The controller clock can be switched off during suspend/resume,
let runtime PM take care of that.
Signed-off-by: Dien Pham <dien.pham.ry@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
drivers/pci/host/pcie-rcar.c | 25 +++++++------------------
1 file changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 8b51208875fc..889603783f01 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -145,7 +145,6 @@ struct rcar_pcie {
void __iomem *base;
struct list_head resources;
int root_bus_nr;
- struct clk *clk;
struct clk *bus_clk;
struct rcar_msi msi;
};
@@ -917,15 +916,6 @@ static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
if (IS_ERR(pcie->base))
return PTR_ERR(pcie->base);
- pcie->clk = devm_clk_get(dev, "pcie");
- if (IS_ERR(pcie->clk)) {
- dev_err(dev, "cannot get platform clock\n");
- return PTR_ERR(pcie->clk);
- }
- err = clk_prepare_enable(pcie->clk);
- if (err)
- return err;
-
pcie->bus_clk = devm_clk_get(dev, "pcie_bus");
if (IS_ERR(pcie->bus_clk)) {
dev_err(dev, "cannot get pcie bus clock\n");
@@ -957,7 +947,6 @@ static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
err_map_reg:
clk_disable_unprepare(pcie->bus_clk);
fail_clk:
- clk_disable_unprepare(pcie->clk);
return err;
}
@@ -1126,6 +1115,13 @@ static int rcar_pcie_probe(struct platform_device *pdev)
rcar_pcie_parse_request_of_pci_ranges(pcie);
+ pm_runtime_enable(pcie->dev);
+ err = pm_runtime_get_sync(pcie->dev);
+ if (err < 0) {
+ dev_err(pcie->dev, "pm_runtime_get_sync failed\n");
+ goto err_pm_disable;
+ }
+
err = rcar_pcie_get_resources(pcie);
if (err < 0) {
dev_err(dev, "failed to request resources: %d\n", err);
@@ -1136,13 +1132,6 @@ static int rcar_pcie_probe(struct platform_device *pdev)
if (err)
goto err_free_bridge;
- pm_runtime_enable(dev);
- err = pm_runtime_get_sync(dev);
- if (err < 0) {
- dev_err(dev, "pm_runtime_get_sync failed\n");
- goto err_pm_disable;
- }
-
/* Failure to get a link might just be that no cards are inserted */
hw_init_fn = of_device_get_match_data(dev);
err = hw_init_fn(pcie);
--
2.11.0
next reply other threads:[~2017-11-08 9:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-08 9:19 Marek Vasut [this message]
2017-11-08 9:36 ` [PATCH] PCI: rcar: Use runtime PM to control controller clock Geert Uytterhoeven
2017-11-08 9:55 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171108091956.8537-1-marek.vasut+renesas@gmail.com \
--to=marek.vasut@gmail.com \
--cc=dien.pham.ry@rvc.renesas.com \
--cc=geert+renesas@glider.be \
--cc=hien.dang.eb@renesas.com \
--cc=horms+renesas@verge.net.au \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=marek.vasut+renesas@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).