[PATCH v3 0/6] some fixes to the pci-hyperv driver.

[PATCH v3 0/6] some fixes to the pci-hyperv driver.

[Dexuan Cui]

Changes in v2 are:

Patch 1, 6: no change since v1.
Patch 2,4,5: I added these new patches, as suggested by Michael Kelley.
Patch 3: Removed the unnecessary drain_workqueue(), as suggested by Michael=
 Kelley.

Changes in v3 are:

Patch 5: minimized the scope of the spinlock, as suggested by Michael Kelle=
y.

Dexuan Cui (6):
  PCI: hv: fix a comment typo in _hv_pcifront_read_config()
  PCI: hv: hv_eject_device_work(): remove the bogus test
  PCI: hv: serialize the present/eject work items
  PCI: hv: remove hbus->enum_sem
  PCI: hv: hv_pci_devices_present(): only queue a new work when
    necessary
  PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

 drivers/pci/host/pci-hyperv.c | 116 ++++++++++++++++++++++++++++++++------=
----
 1 file changed, 90 insertions(+), 26 deletions(-)

--=20
2.7.4

[PATCH v3 1/6] PCI: hv: fix a comment typo in _hv_pcifront_read_config()

[Dexuan Cui]

No functional change.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: bdd74440d9e8 ("PCI: hv: Add explicit barriers to config space access=
")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/pci/host/pci-hyperv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 2faf38eab785..1233300f41c6 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -653,7 +653,7 @@ static void _hv_pcifront_read_config(struct hv_pci_dev =
*hpdev, int where,
 			break;
 		}
 		/*
-		 * Make sure the write was done before we release the spinlock
+		 * Make sure the read was done before we release the spinlock
 		 * allowing consecutive reads/writes.
 		 */
 		mb();
--=20
2.7.4

RE: [PATCH v3 1/6] PCI: hv: fix a comment typo in _hv_pcifront_read_config()

[Haiyang Zhang]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 1:22 PM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;
> Haiyang Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microsoft.com>;
> stable@vger.kernel.org
> Subject: [PATCH v3 1/6] PCI: hv: fix a comment typo in
> _hv_pcifront_read_config()
>=20
> No functional change.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Fixes: bdd74440d9e8 ("PCI: hv: Add explicit barriers to config space acce=
ss")
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> ---

Acked-by: Haiyang Zhang <haiyangz@microsoft.com>

[PATCH v3 2/6] PCI: hv: hv_eject_device_work(): remove the bogus test

[Dexuan Cui]

When we're in the function, hpdev->state must be hv_pcichild_ejecting:
see hv_pci_eject_device().

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
---
 drivers/pci/host/pci-hyperv.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 1233300f41c6..04edb24c92ee 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -1796,10 +1796,7 @@ static void hv_eject_device_work(struct work_struct =
*work)
=20
 	hpdev =3D container_of(work, struct hv_pci_dev, wrk);
=20
-	if (hpdev->state !=3D hv_pcichild_ejecting) {
-		put_pcichild(hpdev, hv_pcidev_ref_pnp);
-		return;
-	}
+	WARN_ON(hpdev->state !=3D hv_pcichild_ejecting);
=20
 	/*
 	 * Ejection can come before or after the PCI bus has been set up, so
--=20
2.7.4

RE: [PATCH v3 2/6] PCI: hv: hv_eject_device_work(): remove the bogus test

[Michael Kelley (EOSG)]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 10:22 AM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan <kys@mi=
crosoft.com>;
> Stephen Hemminger <sthemmin@microsoft.com>; olaf@aepfle.de; apw@canonical=
.com;
> jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;=
 Haiyang Zhang
> <haiyangz@microsoft.com>; vkuznets@redhat.com; marcelo.cerri@canonical.co=
m; Michael
> Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microso=
ft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 2/6] PCI: hv: hv_eject_device_work(): remove the bogus=
 test
>=20
> When we're in the function, hpdev->state must be hv_pcichild_ejecting:
> see hv_pci_eject_device().
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> ---
>  drivers/pci/host/pci-hyperv.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
>=20
> diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.=
c
> index 1233300f41c6..04edb24c92ee 100644
> --- a/drivers/pci/host/pci-hyperv.c
> +++ b/drivers/pci/host/pci-hyperv.c
> @@ -1796,10 +1796,7 @@ static void hv_eject_device_work(struct work_struc=
t *work)
>=20
>  	hpdev =3D container_of(work, struct hv_pci_dev, wrk);
>=20
> -	if (hpdev->state !=3D hv_pcichild_ejecting) {
> -		put_pcichild(hpdev, hv_pcidev_ref_pnp);
> -		return;
> -	}
> +	WARN_ON(hpdev->state !=3D hv_pcichild_ejecting);
>=20
>  	/*
>  	 * Ejection can come before or after the PCI bus has been set up, so
> --
> 2.7.4

Reviewed-by: Michael Kelley <mikelley@microsoft.com>

RE: [PATCH v3 2/6] PCI: hv: hv_eject_device_work(): remove the bogus test

[Haiyang Zhang]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 1:22 PM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;
> Haiyang Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microsoft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 2/6] PCI: hv: hv_eject_device_work(): remove the bogus=
 test
>=20
> When we're in the function, hpdev->state must be hv_pcichild_ejecting:
> see hv_pci_eject_device().
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> ---

Acked-by: Haiyang Zhang <haiyangz@microsoft.com>

[PATCH v3 3/6] PCI: hv: serialize the present/eject work items

[Dexuan Cui]

When we hot-remove the device, we first receive a PCI_EJECT message and
then receive a PCI_BUS_RELATIONS message with bus_rel->device_count =3D=3D =
0.

The first message is offloaded to hv_eject_device_work(), and the second
is offloaded to pci_devices_present_work(). Both the paths can be running
list_del(&hpdev->list_entry), causing general protection fault, because
system_wq can run them concurrently.

The patch eliminates the race condition.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
---
 drivers/pci/host/pci-hyperv.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 04edb24c92ee..aaee41faf55f 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -461,6 +461,8 @@ struct hv_pcibus_device {
 	struct retarget_msi_interrupt retarget_msi_interrupt_params;
=20
 	spinlock_t retarget_msi_interrupt_lock;
+
+	struct workqueue_struct *wq;
 };
=20
 /*
@@ -1770,7 +1772,7 @@ static void hv_pci_devices_present(struct hv_pcibus_d=
evice *hbus,
 	spin_unlock_irqrestore(&hbus->device_list_lock, flags);
=20
 	get_hvpcibus(hbus);
-	schedule_work(&dr_wrk->wrk);
+	queue_work(hbus->wq, &dr_wrk->wrk);
 }
=20
 /**
@@ -1845,7 +1847,7 @@ static void hv_pci_eject_device(struct hv_pci_dev *hp=
dev)
 	get_pcichild(hpdev, hv_pcidev_ref_pnp);
 	INIT_WORK(&hpdev->wrk, hv_eject_device_work);
 	get_hvpcibus(hpdev->hbus);
-	schedule_work(&hpdev->wrk);
+	queue_work(hpdev->hbus->wq, &hpdev->wrk);
 }
=20
 /**
@@ -2460,11 +2462,17 @@ static int hv_pci_probe(struct hv_device *hdev,
 	spin_lock_init(&hbus->retarget_msi_interrupt_lock);
 	sema_init(&hbus->enum_sem, 1);
 	init_completion(&hbus->remove_event);
+	hbus->wq =3D alloc_ordered_workqueue("hv_pci_%x", 0,
+					   hbus->sysdata.domain);
+	if (!hbus->wq) {
+		ret =3D -ENOMEM;
+		goto free_bus;
+	}
=20
 	ret =3D vmbus_open(hdev->channel, pci_ring_size, pci_ring_size, NULL, 0,
 			 hv_pci_onchannelcallback, hbus);
 	if (ret)
-		goto free_bus;
+		goto destroy_wq;
=20
 	hv_set_drvdata(hdev, hbus);
=20
@@ -2533,6 +2541,8 @@ static int hv_pci_probe(struct hv_device *hdev,
 	hv_free_config_window(hbus);
 close:
 	vmbus_close(hdev->channel);
+destroy_wq:
+	destroy_workqueue(hbus->wq);
 free_bus:
 	free_page((unsigned long)hbus);
 	return ret;
@@ -2612,6 +2622,7 @@ static int hv_pci_remove(struct hv_device *hdev)
 	irq_domain_free_fwnode(hbus->sysdata.fwnode);
 	put_hvpcibus(hbus);
 	wait_for_completion(&hbus->remove_event);
+	destroy_workqueue(hbus->wq);
 	free_page((unsigned long)hbus);
 	return 0;
 }
--=20
2.7.4

RE: [PATCH v3 3/6] PCI: hv: serialize the present/eject work items

[Michael Kelley (EOSG)]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 10:22 AM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan <kys@mi=
crosoft.com>;
> Stephen Hemminger <sthemmin@microsoft.com>; olaf@aepfle.de; apw@canonical=
.com;
> jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;=
 Haiyang Zhang
> <haiyangz@microsoft.com>; vkuznets@redhat.com; marcelo.cerri@canonical.co=
m; Michael
> Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microso=
ft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 3/6] PCI: hv: serialize the present/eject work items
>=20
> When we hot-remove the device, we first receive a PCI_EJECT message and
> then receive a PCI_BUS_RELATIONS message with bus_rel->device_count =3D=
=3D 0.
>=20
> The first message is offloaded to hv_eject_device_work(), and the second
> is offloaded to pci_devices_present_work(). Both the paths can be running
> list_del(&hpdev->list_entry), causing general protection fault, because
> system_wq can run them concurrently.
>=20
> The patch eliminates the race condition.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> Tested-by: Chris Valean <v-chvale@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> ---
>  drivers/pci/host/pci-hyperv.c | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
>=20

Reviewed-by: Michael Kelley <mikelley@microsoft.com>

RE: [PATCH v3 3/6] PCI: hv: serialize the present/eject work items

[Haiyang Zhang]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 1:22 PM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;
> Haiyang Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microsoft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 3/6] PCI: hv: serialize the present/eject work items
>=20
> When we hot-remove the device, we first receive a PCI_EJECT message and
> then receive a PCI_BUS_RELATIONS message with bus_rel->device_count =3D=
=3D 0.
>=20
> The first message is offloaded to hv_eject_device_work(), and the second =
is
> offloaded to pci_devices_present_work(). Both the paths can be running
> list_del(&hpdev->list_entry), causing general protection fault, because
> system_wq can run them concurrently.
>=20
> The patch eliminates the race condition.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> Tested-by: Chris Valean <v-chvale@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> ---

Acked-by: Haiyang Zhang <haiyangz@microsoft.com>

[PATCH v3 4/6] PCI: hv: remove hbus->enum_sem

[Dexuan Cui]

Since we serialize the present/eject work items now, we don't need the
semaphore any more.

This is suggested by Michael Kelley.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
---
 drivers/pci/host/pci-hyperv.c | 17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index aaee41faf55f..3a385212f666 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -447,7 +447,6 @@ struct hv_pcibus_device {
 	spinlock_t device_list_lock;	/* Protect lists below */
 	void __iomem *cfg_addr;
=20
-	struct semaphore enum_sem;
 	struct list_head resources_for_children;
=20
 	struct list_head children;
@@ -1592,12 +1591,8 @@ static struct hv_pci_dev *get_pcichild_wslot(struct =
hv_pcibus_device *hbus,
  * It must also treat the omission of a previously observed device as
  * notification that the device no longer exists.
  *
- * Note that this function is a work item, and it may not be
- * invoked in the order that it was queued.  Back to back
- * updates of the list of present devices may involve queuing
- * multiple work items, and this one may run before ones that
- * were sent later. As such, this function only does something
- * if is the last one in the queue.
+ * Note that this function is serialized with hv_eject_device_work(),
+ * because both are pushed to the ordered workqueue hbus->wq.
  */
 static void pci_devices_present_work(struct work_struct *work)
 {
@@ -1618,11 +1613,6 @@ static void pci_devices_present_work(struct work_str=
uct *work)
=20
 	INIT_LIST_HEAD(&removed);
=20
-	if (down_interruptible(&hbus->enum_sem)) {
-		put_hvpcibus(hbus);
-		return;
-	}
-
 	/* Pull this off the queue and process it if it was the last one. */
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 	while (!list_empty(&hbus->dr_list)) {
@@ -1639,7 +1629,6 @@ static void pci_devices_present_work(struct work_stru=
ct *work)
 	spin_unlock_irqrestore(&hbus->device_list_lock, flags);
=20
 	if (!dr) {
-		up(&hbus->enum_sem);
 		put_hvpcibus(hbus);
 		return;
 	}
@@ -1726,7 +1715,6 @@ static void pci_devices_present_work(struct work_stru=
ct *work)
 		break;
 	}
=20
-	up(&hbus->enum_sem);
 	put_hvpcibus(hbus);
 	kfree(dr);
 }
@@ -2460,7 +2448,6 @@ static int hv_pci_probe(struct hv_device *hdev,
 	spin_lock_init(&hbus->config_lock);
 	spin_lock_init(&hbus->device_list_lock);
 	spin_lock_init(&hbus->retarget_msi_interrupt_lock);
-	sema_init(&hbus->enum_sem, 1);
 	init_completion(&hbus->remove_event);
 	hbus->wq =3D alloc_ordered_workqueue("hv_pci_%x", 0,
 					   hbus->sysdata.domain);
--=20
2.7.4

RE: [PATCH v3 4/6] PCI: hv: remove hbus->enum_sem

[Michael Kelley (EOSG)]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 10:22 AM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan <kys@mi=
crosoft.com>;
> Stephen Hemminger <sthemmin@microsoft.com>; olaf@aepfle.de; apw@canonical=
.com;
> jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;=
 Haiyang Zhang
> <haiyangz@microsoft.com>; vkuznets@redhat.com; marcelo.cerri@canonical.co=
m; Michael
> Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microso=
ft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 4/6] PCI: hv: remove hbus->enum_sem
>=20
> Since we serialize the present/eject work items now, we don't need the
> semaphore any more.
>=20
> This is suggested by Michael Kelley.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> ---
>  drivers/pci/host/pci-hyperv.c | 17 ++---------------
>  1 file changed, 2 insertions(+), 15 deletions(-)
>=20

Reviewed-by: Michael Kelley <mikelley@microsoft.com>

RE: [PATCH v3 4/6] PCI: hv: remove hbus->enum_sem

[Haiyang Zhang]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 1:22 PM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;
> Haiyang Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microsoft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 4/6] PCI: hv: remove hbus->enum_sem
>=20
> Since we serialize the present/eject work items now, we don't need the
> semaphore any more.
>=20
> This is suggested by Michael Kelley.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> ---

Acked-by: Haiyang Zhang <haiyangz@microsoft.com>

[PATCH v3 5/6] PCI: hv: hv_pci_devices_present(): only queue a new work when necessary

[Dexuan Cui]

If there is a pending work, we just need to add the new dr into
the dr_list.

This is suggested by Michael Kelley.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
---
 drivers/pci/host/pci-hyperv.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 3a385212f666..265ba11e53e2 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -1733,6 +1733,7 @@ static void hv_pci_devices_present(struct hv_pcibus_d=
evice *hbus,
 	struct hv_dr_state *dr;
 	struct hv_dr_work *dr_wrk;
 	unsigned long flags;
+	bool pending_dr;
=20
 	dr_wrk =3D kzalloc(sizeof(*dr_wrk), GFP_NOWAIT);
 	if (!dr_wrk)
@@ -1756,11 +1757,21 @@ static void hv_pci_devices_present(struct hv_pcibus=
_device *hbus,
 	}
=20
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
+	/*
+	 * If pending_dr is true, we have already queued a work,
+	 * which will see the new dr. Otherwise, we need to
+	 * queue a new work.
+	 */
+	pending_dr =3D !list_empty(&hbus->dr_list);
 	list_add_tail(&dr->list_entry, &hbus->dr_list);
 	spin_unlock_irqrestore(&hbus->device_list_lock, flags);
=20
-	get_hvpcibus(hbus);
-	queue_work(hbus->wq, &dr_wrk->wrk);
+	if (pending_dr) {
+		kfree(dr_wrk);
+	} else {
+		get_hvpcibus(hbus);
+		queue_work(hbus->wq, &dr_wrk->wrk);
+	}
 }
=20
 /**
--=20
2.7.4

RE: [PATCH v3 5/6] PCI: hv: hv_pci_devices_present(): only queue a new work when necessary

[Michael Kelley (EOSG)]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 10:22 AM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan <kys@mi=
crosoft.com>;
> Stephen Hemminger <sthemmin@microsoft.com>; olaf@aepfle.de; apw@canonical=
.com;
> jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;=
 Haiyang Zhang
> <haiyangz@microsoft.com>; vkuznets@redhat.com; marcelo.cerri@canonical.co=
m; Michael
> Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microso=
ft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 5/6] PCI: hv: hv_pci_devices_present(): only queue a n=
ew work when
> necessary
>=20
> If there is a pending work, we just need to add the new dr into
> the dr_list.
>=20
> This is suggested by Michael Kelley.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> ---
>  drivers/pci/host/pci-hyperv.c | 15 +++++++++++++--
>  1 file changed, 13 insertions(+), 2 deletions(-)
>=20

Reviewed-by: Michael Kelley <mikelley@microsoft.com>

RE: [PATCH v3 5/6] PCI: hv: hv_pci_devices_present(): only queue a new work when necessary

[Haiyang Zhang]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 1:22 PM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;
> Haiyang Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microsoft.com>; Jack
> Morgenstein <jackm@mellanox.com>; stable@vger.kernel.org
> Subject: [PATCH v3 5/6] PCI: hv: hv_pci_devices_present(): only queue a n=
ew
> work when necessary
>=20
> If there is a pending work, we just need to add the new dr into the dr_li=
st.
>=20
> This is suggested by Michael Kelley.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Michael Kelley (EOSG) <Michael.H.Kelley@microsoft.com>
> ---

Acked-by: Haiyang Zhang <haiyangz@microsoft.com>

[PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Dexuan Cui]

1. With the patch "x86/vector/msi: Switch to global reservation mode"
(4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg()
by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_startup()
 -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().

Fix this by polling the channel.

2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue also happens to old kernels like
v4.14, v4.13, etc.

Fix this by polling the channel for the PCI_EJECT message and
hpdev->state, and by checking the PCI vendor ID.

Note: actually the above issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu =3D=3D smp_processor_id()" is true.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
---
 drivers/pci/host/pci-hyperv.c | 58 +++++++++++++++++++++++++++++++++++++++=
+++-
 1 file changed, 57 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 265ba11e53e2..50cdefe3f6d3 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -521,6 +521,8 @@ struct hv_pci_compl {
 	s32 completion_status;
 };
=20
+static void hv_pci_onchannelcallback(void *context);
+
 /**
  * hv_pci_generic_compl() - Invoked for a completion packet
  * @context:		Set up by the sender of the packet.
@@ -665,6 +667,31 @@ static void _hv_pcifront_read_config(struct hv_pci_dev=
 *hpdev, int where,
 	}
 }
=20
+static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
+{
+	u16 ret;
+	unsigned long flags;
+	void __iomem *addr =3D hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET +
+			     PCI_VENDOR_ID;
+
+	spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
+
+	/* Choose the function to be read. (See comment above) */
+	writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
+	/* Make sure the function was chosen before we start reading. */
+	mb();
+	/* Read from that function's config space. */
+	ret =3D readw(addr);
+	/*
+	 * mb() is not required here, because the spin_unlock_irqrestore()
+	 * is a barrier.
+	 */
+
+	spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+
+	return ret;
+}
+
 /**
  * _hv_pcifront_write_config() - Internal PCI config write
  * @hpdev:	The PCI driver's representation of the device
@@ -1107,8 +1134,37 @@ static void hv_compose_msi_msg(struct irq_data *data=
, struct msi_msg *msg)
 	 * Since this function is called with IRQ locks held, can't
 	 * do normal wait for completion; instead poll.
 	 */
-	while (!try_wait_for_completion(&comp.comp_pkt.host_event))
+	while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
+		/* 0xFFFF means an invalid PCI VENDOR ID. */
+		if (hv_pcifront_get_vendor_id(hpdev) =3D=3D 0xFFFF) {
+			dev_err_once(&hbus->hdev->device,
+				     "the device has gone\n");
+			goto free_int_desc;
+		}
+
+		/*
+		 * When the higher level interrupt code calls us with
+		 * interrupt disabled, we must poll the channel by calling
+		 * the channel callback directly when channel->target_cpu is
+		 * the current CPU. When the higher level interrupt code
+		 * calls us with interrupt enabled, let's add the
+		 * local_bh_disable()/enable() to avoid race.
+		 */
+		local_bh_disable();
+
+		if (hbus->hdev->channel->target_cpu =3D=3D smp_processor_id())
+			hv_pci_onchannelcallback(hbus);
+
+		local_bh_enable();
+
+		if (hpdev->state =3D=3D hv_pcichild_ejecting) {
+			dev_err_once(&hbus->hdev->device,
+				     "the device is being ejected\n");
+			goto free_int_desc;
+		}
+
 		udelay(100);
+	}
=20
 	if (comp.comp_pkt.completion_status < 0) {
 		dev_err(&hbus->hdev->device,
--=20
2.7.4

RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Michael Kelley (EOSG)]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 10:22 AM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan <kys@mi=
crosoft.com>;
> Stephen Hemminger <sthemmin@microsoft.com>; olaf@aepfle.de; apw@canonical=
.com;
> jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;=
 Haiyang Zhang
> <haiyangz@microsoft.com>; vkuznets@redhat.com; marcelo.cerri@canonical.co=
m; Michael
> Kelley (EOSG) <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microso=
ft.com>;
> stable@vger.kernel.org; Jack Morgenstein <jackm@mellanox.com>
> Subject: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg(=
)
>=20
> 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
> Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg(=
)
> by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_startup=
()
>  -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
> disabled in __setup_irq().
>=20
> Fix this by polling the channel.
>=20
> 2. If the host is ejecting the VF device before we reach
> hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
> forever, because at this time the host doesn't respond to the
> CREATE_INTERRUPT request. This issue also happens to old kernels like
> v4.14, v4.13, etc.
>=20
> Fix this by polling the channel for the PCI_EJECT message and
> hpdev->state, and by checking the PCI vendor ID.
>=20
> Note: actually the above issues also happen to a SMP VM, if
> "hbus->hdev->channel->target_cpu =3D=3D smp_processor_id()" is true.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> Tested-by: Chris Valean <v-chvale@microsoft.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> ---
>  drivers/pci/host/pci-hyperv.c | 58 +++++++++++++++++++++++++++++++++++++=
+++++-
>  1 file changed, 57 insertions(+), 1 deletion(-)
>=20

Reviewed-by: Michael Kelley <mikelley@microsoft.com>

Re: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Lorenzo Pieralisi]

On Tue, Mar 06, 2018 at 06:21:56PM +0000, Dexuan Cui wrote:
> 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
> Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg()
> by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_startup()
>  -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
> disabled in __setup_irq().
> 
> Fix this by polling the channel.
> 
> 2. If the host is ejecting the VF device before we reach
> hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
> forever, because at this time the host doesn't respond to the
> CREATE_INTERRUPT request. This issue also happens to old kernels like
> v4.14, v4.13, etc.

If you are fixing a problem you should report what commit you are fixing
with a Fixes: tag and add a CC: stable@vger.kernel.org to the commit log
to send it to stable kernels to which it should be applied; mentioning
kernel versions in the commit log is useless and should be omitted.

Side note: you should not have stable@vger.kernel.org in the email
addresses CC list you are sending the patches to (you mark patches for
stable by adding an appropriate CC tag in the commit log).

Here:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/stable-kernel-rules.rst?h=v4.16-rc4

Last but not least, most of the patches in this series do not justify
sending them to stable kernels at all so you should remove the
corresponding tag from the patches.

Thanks,
Lorenzo

> Fix this by polling the channel for the PCI_EJECT message and
> hpdev->state, and by checking the PCI vendor ID.
> 
> Note: actually the above issues also happen to a SMP VM, if
> "hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
> 
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> Tested-by: Chris Valean <v-chvale@microsoft.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> ---
>  drivers/pci/host/pci-hyperv.c | 58 ++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 57 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
> index 265ba11e53e2..50cdefe3f6d3 100644
> --- a/drivers/pci/host/pci-hyperv.c
> +++ b/drivers/pci/host/pci-hyperv.c
> @@ -521,6 +521,8 @@ struct hv_pci_compl {
>  	s32 completion_status;
>  };
>  
> +static void hv_pci_onchannelcallback(void *context);
> +
>  /**
>   * hv_pci_generic_compl() - Invoked for a completion packet
>   * @context:		Set up by the sender of the packet.
> @@ -665,6 +667,31 @@ static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
>  	}
>  }
>  
> +static u16 hv_pcifront_get_vendor_id(struct hv_pci_dev *hpdev)
> +{
> +	u16 ret;
> +	unsigned long flags;
> +	void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET +
> +			     PCI_VENDOR_ID;
> +
> +	spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
> +
> +	/* Choose the function to be read. (See comment above) */
> +	writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
> +	/* Make sure the function was chosen before we start reading. */
> +	mb();
> +	/* Read from that function's config space. */
> +	ret = readw(addr);
> +	/*
> +	 * mb() is not required here, because the spin_unlock_irqrestore()
> +	 * is a barrier.
> +	 */
> +
> +	spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
> +
> +	return ret;
> +}
> +
>  /**
>   * _hv_pcifront_write_config() - Internal PCI config write
>   * @hpdev:	The PCI driver's representation of the device
> @@ -1107,8 +1134,37 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
>  	 * Since this function is called with IRQ locks held, can't
>  	 * do normal wait for completion; instead poll.
>  	 */
> -	while (!try_wait_for_completion(&comp.comp_pkt.host_event))
> +	while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
> +		/* 0xFFFF means an invalid PCI VENDOR ID. */
> +		if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) {
> +			dev_err_once(&hbus->hdev->device,
> +				     "the device has gone\n");
> +			goto free_int_desc;
> +		}
> +
> +		/*
> +		 * When the higher level interrupt code calls us with
> +		 * interrupt disabled, we must poll the channel by calling
> +		 * the channel callback directly when channel->target_cpu is
> +		 * the current CPU. When the higher level interrupt code
> +		 * calls us with interrupt enabled, let's add the
> +		 * local_bh_disable()/enable() to avoid race.
> +		 */
> +		local_bh_disable();
> +
> +		if (hbus->hdev->channel->target_cpu == smp_processor_id())
> +			hv_pci_onchannelcallback(hbus);
> +
> +		local_bh_enable();
> +
> +		if (hpdev->state == hv_pcichild_ejecting) {
> +			dev_err_once(&hbus->hdev->device,
> +				     "the device is being ejected\n");
> +			goto free_int_desc;
> +		}
> +
>  		udelay(100);
> +	}
>  
>  	if (comp.comp_pkt.completion_status < 0) {
>  		dev_err(&hbus->hdev->device,
> -- 
> 2.7.4

RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Dexuan Cui]

> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Sent: Wednesday, March 7, 2018 04:35
> On Tue, Mar 06, 2018 at 06:21:56PM +0000, Dexuan Cui wrote:
> > 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> > (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
> > Hyper-V VM with SR-IOV. This is because when we reach
> hv_compose_msi_msg()
> > by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_start=
up()
> >  -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
> > msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
> > disabled in __setup_irq().
> >
> > Fix this by polling the channel.
> >
> > 2. If the host is ejecting the VF device before we reach
> > hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
> > forever, because at this time the host doesn't respond to the
> > CREATE_INTERRUPT request. This issue also happens to old kernels like
> > v4.14, v4.13, etc.
>
> If you are fixing a problem you should report what commit you are fixing
> with a Fixes: tag and add a CC: stable@vger.kernel.org to the commit log
> to send it to stable kernels to which it should be applied; mentioning
> kernel versions in the commit log is useless and should be omitted.

Hi Lorenzo,
Thanks for your comments!
This patch does have a "Cc: stable@vger.kernel.org" in the sign-off area. :=
-)

Here the patch is made to resolve 2 issues:
#1 is triggered by the x86 global reservation mode (4900be8360) patch.
4900be8360 in itself is good. It's just that drivers/pci/host/pci-hyperv.c
should be fixed.

#2 is a longstanding issue since the first day the pci-hyperv driver was
accepted into the kernel.

So IMO actually we don't really need to add a Fixes: tag, which is usually
used to specify a specific commit that introduces a bug that is being fixed=
.

> Side note: you should not have stable@vger.kernel.org in the email
> addresses CC list you are sending the patches to (you mark patches for
> stable by adding an appropriate CC tag in the commit log).

Sorry, I didn't know this, but actually I didn't add stable@vger.kernel.org
manually. Instead I used "git send-email" to send this patchset, and it tol=
d
me "The Cc list above has been expanded by additional addresses found
in the patch commit message."

I didn't find a way to disable this behavior of "git send-email" by checkin=
g
its manual and googling it. This is strange.

> Here:
>
> git.kernel.org/.../Documentation/process/stable-kernel-rules.rst
>
> Last but not least, most of the patches in this series do not justify
> sending them to stable kernels at all so you should remove the
> corresponding tag from the patches.

I hope at least these 2 patches can go into the stable kernels:
[PATCH v3 3/6] PCI: hv: serialize the present/eject work items
[PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()
Especially the second one, which fixes a real hang issue for UP virtual
machines running v4.15 and newer.
And,  IMO the patches are small enough (<100 lines) , but definitely
the maintainers make the final call.

>
> Thanks,
> Lorenzo
>
> > Fix this by polling the channel for the PCI_EJECT message and
> > hpdev->state, and by checking the PCI vendor ID.
> >
> > Note: actually the above issues also happen to a SMP VM, if
> > "hbus->hdev->channel->target_cpu =3D=3D smp_processor_id()" is true.
> >
> > Signed-off-by: Dexuan Cui <decui@microsoft.com>
> > Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> > Tested-by: Chris Valean <v-chvale@microsoft.com>
> > Cc: stable@vger.kernel.org
> > Cc: Stephen Hemminger <sthemmin@microsoft.com>
> > Cc: K. Y. Srinivasan <kys@microsoft.com>
> > Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> > Cc: Jack Morgenstein <jackm@mellanox.com>
> > ---
> >  drivers/pci/host/pci-hyperv.c | 58


Thanks,
-- Dexuan

RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Dexuan Cui]

> From: Dexuan Cui
> Sent: Wednesday, March 7, 2018 13:40
> To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com; linux-
> kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org; Haiyang
> Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; stable@vger.kernel.org; Jack
> Morgenstein <jackm@mellanox.com>
> Subject: RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_=
msg()
>=20
> > From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Sent: Wednesday, March 7, 2018 04:35
> > On Tue, Mar 06, 2018 at 06:21:56PM +0000, Dexuan Cui wrote:
> > > 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> > > (4900be8360), the recent v4.15 and newer kernels always hang for 1-vC=
PU
> > > Hyper-V VM with SR-IOV. This is because when we reach
> > hv_compose_msi_msg()
> > > by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_sta=
rtup()
> > >  -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
> > > msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
> > > disabled in __setup_irq().
> > >
> > > Fix this by polling the channel.
> > >
> > > 2. If the host is ejecting the VF device before we reach
> > > hv_compose_msi_msg(), in a UP VM, we can hang in
> hv_compose_msi_msg()
> > > forever, because at this time the host doesn't respond to the
> > > CREATE_INTERRUPT request. This issue also happens to old kernels like
> > > v4.14, v4.13, etc.
> >
> > If you are fixing a problem you should report what commit you are fixin=
g
> > with a Fixes: tag and add a CC: stable@vger.kernel.org to the commit lo=
g
> > to send it to stable kernels to which it should be applied; mentioning
> > kernel versions in the commit log is useless and should be omitted.
>=20
> Hi Lorenzo,
> Thanks for your comments!
> This patch does have a "Cc: stable@vger.kernel.org" in the sign-off area.=
 :-)
>=20
> Here the patch is made to resolve 2 issues:
> #1 is triggered by the x86 global reservation mode (4900be8360) patch.
> 4900be8360 in itself is good. It's just that drivers/pci/host/pci-hyperv.=
c
> should be fixed.
>=20
> #2 is a longstanding issue since the first day the pci-hyperv driver was
> accepted into the kernel.
>=20
> So IMO actually we don't really need to add a Fixes: tag, which is usuall=
y
> used to specify a specific commit that introduces a bug that is being fix=
ed.
>=20
> > Side note: you should not have stable@vger.kernel.org in the email
> > addresses CC list you are sending the patches to (you mark patches for
> > stable by adding an appropriate CC tag in the commit log).
>=20
> Sorry, I didn't know this, but actually I didn't add stable@vger.kernel.o=
rg
> manually. Instead I used "git send-email" to send this patchset, and it t=
old
> me "The Cc list above has been expanded by additional addresses found
> in the patch commit message."
>=20
> I didn't find a way to disable this behavior of "git send-email" by check=
ing
> its manual and googling it. This is strange.
>=20
> > Here:
> >
> > git.kernel.org/.../Documentation/process/stable-kernel-rules.rst
> >
> > Last but not least, most of the patches in this series do not justify
> > sending them to stable kernels at all so you should remove the
> > corresponding tag from the patches.
>=20
> I hope at least these 2 patches can go into the stable kernels:
> [PATCH v3 3/6] PCI: hv: serialize the present/eject work items
> [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()
> Especially the second one, which fixes a real hang issue for UP virtual
> machines running v4.15 and newer.
> And,  IMO the patches are small enough (<100 lines) , but definitely
> the maintainers make the final call.
>=20
> >
> > Thanks,
> > Lorenzo
> >
> > > Fix this by polling the channel for the PCI_EJECT message and
> > > hpdev->state, and by checking the PCI vendor ID.
> > >
> > > Note: actually the above issues also happen to a SMP VM, if
> > > "hbus->hdev->channel->target_cpu =3D=3D smp_processor_id()" is true.
> > >
> > > Signed-off-by: Dexuan Cui <decui@microsoft.com>
> > > Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> > > Tested-by: Chris Valean <v-chvale@microsoft.com>
> > > Cc: stable@vger.kernel.org
> > > Cc: Stephen Hemminger <sthemmin@microsoft.com>
> > > Cc: K. Y. Srinivasan <kys@microsoft.com>
> > > Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> > > Cc: Jack Morgenstein <jackm@mellanox.com>
> > > ---
> > >  drivers/pci/host/pci-hyperv.c | 58
>=20
>=20
> Thanks,
> -- Dexuan

Hi Lorenzo, Bjorn, and all,
Do you need more ACKs? Currently Michael and Haiyang reviewed and ack'd=20
the patchset.

Should I send a v4 that just removes the "CC: stable@vger.kernel.org" tag
for patches 1, 2, 4 and 5? I tend to avoid a v4 as I supppose it would be=20
easier if you just remove the tags if you belive it's necessary (IMHO all t=
he
6 paches are not big and it would be great if we can have all of them in=20
the old stable kernels, but I respect your decision).

Please let me know if I missed something when addressing the comments,
 and if I should send a v4.

Thanks!
-- Dexuan

Re: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Lorenzo Pieralisi]

On Tue, Mar 13, 2018 at 06:23:39PM +0000, Dexuan Cui wrote:
> > From: Dexuan Cui
> > Sent: Wednesday, March 7, 2018 13:40
> > To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Cc: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> > <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> > olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com; linux-
> > kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org; Haiyang
> > Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> > marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> > <Michael.H.Kelley@microsoft.com>; stable@vger.kernel.org; Jack
> > Morgenstein <jackm@mellanox.com>
> > Subject: RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()
> > 
> > > From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > > Sent: Wednesday, March 7, 2018 04:35
> > > On Tue, Mar 06, 2018 at 06:21:56PM +0000, Dexuan Cui wrote:
> > > > 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> > > > (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
> > > > Hyper-V VM with SR-IOV. This is because when we reach
> > > hv_compose_msi_msg()
> > > > by request_irq()  -> request_threaded_irq() -> __setup_irq()->irq_startup()
> > > >  -> __irq_startup() -> irq_domain_activate_irq() -> ... ->
> > > > msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
> > > > disabled in __setup_irq().
> > > >
> > > > Fix this by polling the channel.
> > > >
> > > > 2. If the host is ejecting the VF device before we reach
> > > > hv_compose_msi_msg(), in a UP VM, we can hang in
> > hv_compose_msi_msg()
> > > > forever, because at this time the host doesn't respond to the
> > > > CREATE_INTERRUPT request. This issue also happens to old kernels like
> > > > v4.14, v4.13, etc.
> > >
> > > If you are fixing a problem you should report what commit you are fixing
> > > with a Fixes: tag and add a CC: stable@vger.kernel.org to the commit log
> > > to send it to stable kernels to which it should be applied; mentioning
> > > kernel versions in the commit log is useless and should be omitted.
> > 
> > Hi Lorenzo,
> > Thanks for your comments!
> > This patch does have a "Cc: stable@vger.kernel.org" in the sign-off area. :-)
> > 
> > Here the patch is made to resolve 2 issues:
> > #1 is triggered by the x86 global reservation mode (4900be8360) patch.
> > 4900be8360 in itself is good. It's just that drivers/pci/host/pci-hyperv.c
> > should be fixed.
> > 
> > #2 is a longstanding issue since the first day the pci-hyperv driver was
> > accepted into the kernel.
> > 
> > So IMO actually we don't really need to add a Fixes: tag, which is usually
> > used to specify a specific commit that introduces a bug that is being fixed.
> > 
> > > Side note: you should not have stable@vger.kernel.org in the email
> > > addresses CC list you are sending the patches to (you mark patches for
> > > stable by adding an appropriate CC tag in the commit log).
> > 
> > Sorry, I didn't know this, but actually I didn't add stable@vger.kernel.org
> > manually. Instead I used "git send-email" to send this patchset, and it told
> > me "The Cc list above has been expanded by additional addresses found
> > in the patch commit message."
> > 
> > I didn't find a way to disable this behavior of "git send-email" by checking
> > its manual and googling it. This is strange.
> > 
> > > Here:
> > >
> > > git.kernel.org/.../Documentation/process/stable-kernel-rules.rst
> > >
> > > Last but not least, most of the patches in this series do not justify
> > > sending them to stable kernels at all so you should remove the
> > > corresponding tag from the patches.
> > 
> > I hope at least these 2 patches can go into the stable kernels:
> > [PATCH v3 3/6] PCI: hv: serialize the present/eject work items
> > [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()
> > Especially the second one, which fixes a real hang issue for UP virtual
> > machines running v4.15 and newer.
> > And,  IMO the patches are small enough (<100 lines) , but definitely
> > the maintainers make the final call.
> > 
> > >
> > > Thanks,
> > > Lorenzo
> > >
> > > > Fix this by polling the channel for the PCI_EJECT message and
> > > > hpdev->state, and by checking the PCI vendor ID.
> > > >
> > > > Note: actually the above issues also happen to a SMP VM, if
> > > > "hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
> > > >
> > > > Signed-off-by: Dexuan Cui <decui@microsoft.com>
> > > > Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> > > > Tested-by: Chris Valean <v-chvale@microsoft.com>
> > > > Cc: stable@vger.kernel.org
> > > > Cc: Stephen Hemminger <sthemmin@microsoft.com>
> > > > Cc: K. Y. Srinivasan <kys@microsoft.com>
> > > > Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> > > > Cc: Jack Morgenstein <jackm@mellanox.com>
> > > > ---
> > > >  drivers/pci/host/pci-hyperv.c | 58
> > 
> > 
> > Thanks,
> > -- Dexuan
> 
> Hi Lorenzo, Bjorn, and all,
> Do you need more ACKs? Currently Michael and Haiyang reviewed and ack'd 
> the patchset.
> 
> Should I send a v4 that just removes the "CC: stable@vger.kernel.org" tag
> for patches 1, 2, 4 and 5? I tend to avoid a v4 as I supppose it would be 
> easier if you just remove the tags if you belive it's necessary (IMHO all the
> 6 paches are not big and it would be great if we can have all of them in 
> the old stable kernels, but I respect your decision).
> 
> Please let me know if I missed something when addressing the comments,
>  and if I should send a v4.

I will have a look tomorrow, thank you.

Lorenzo

Re: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Lorenzo Pieralisi]

On Tue, Mar 13, 2018 at 06:23:39PM +0000, Dexuan Cui wrote:

[...]

> Hi Lorenzo, Bjorn, and all,
> Do you need more ACKs? Currently Michael and Haiyang reviewed and ack'd 
> the patchset.
> 
> Should I send a v4 that just removes the "CC: stable@vger.kernel.org" tag
> for patches 1, 2, 4 and 5? I tend to avoid a v4 as I supppose it would be 
> easier if you just remove the tags if you belive it's necessary (IMHO all the
> 6 paches are not big and it would be great if we can have all of them in 
> the old stable kernels, but I respect your decision).

I think you need a v4 since for patches that are actually fixing a bug I
want a Fixes: tag added and I want them to be applicable independently
of other patches in the series. Send them in a separate series if you
prefer - I just want to make sure they apply independently.

As for marking patches for stable kernels, I do not think it is right
to send cosmetic churn to stable kernels anyway, at least that's my
reading of the policy.

You can easily post a v4 with patches reshuffled - I will apply them
accordingly.

Before re-posting please read this to improve formatting (I can do it
for you but while at it you can do it yourself):

https://marc.info/?l=linux-pci&m=150905742808166&w=2

Thanks,
Lorenzo

RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Dexuan Cui]

> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Sent: Wednesday, March 14, 2018 04:50
> On Tue, Mar 13, 2018 at 06:23:39PM +0000, Dexuan Cui wrote:
>=20
> [...]
>=20
> > Hi Lorenzo, Bjorn, and all,
> > Do you need more ACKs? Currently Michael and Haiyang reviewed and ack'd
> > the patchset.
> >
> > Should I send a v4 that just removes the "CC: stable@vger.kernel.org" t=
ag
> > for patches 1, 2, 4 and 5? I tend to avoid a v4 as I supppose it would =
be
> > easier if you just remove the tags if you belive it's necessary (IMHO a=
ll the
> > 6 paches are not big and it would be great if we can have all of them i=
n
> > the old stable kernels, but I respect your decision).
>=20
> I think you need a v4 since for patches that are actually fixing a bug I
> want a Fixes: tag added and I want them to be applicable independently
> of other patches in the series. Send them in a separate series if you
> prefer - I just want to make sure they apply independently.

Ok, I'll send 2 series: one for
[6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()
[3/6] PCI: hv: serialize the present/eject work items
These fix real issues reported by Mellanox when they tested SR-IOV with VMs
runnning on Hyper-V. I'll add stable tags for them.

The other series will cover these 4 patces which don't need to go in stable=
:
[5/6] PCI: hv: hv_pci_devices_present(): only queue a new work when necessa=
ry
[4/6] PCI: hv: remove hbus->enum_sem
[2/6] PCI: hv: hv_eject_device_work(): remove the bogus test
[1/6] PCI: hv: fix a comment typo in _hv_pcifront_read_config()
=20
> As for marking patches for stable kernels, I do not think it is right
> to send cosmetic churn to stable kernels anyway, at least that's my
> reading of the policy.
>=20
> You can easily post a v4 with patches reshuffled - I will apply them
> accordingly.
OK.
=20
> Before re-posting please read this to improve formatting (I can do it
> for you but while at it you can do it yourself):
> https://marc.info/?l=3Dlinux-pci&m=3D150905742808166&w=3D2
Will read. Thanks!

-- Dexuan

RE: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg()

[Haiyang Zhang]

> -----Original Message-----
> From: Dexuan Cui
> Sent: Tuesday, March 6, 2018 1:22 PM
> To: bhelgaas@google.com; linux-pci@vger.kernel.org; KY Srinivasan
> <kys@microsoft.com>; Stephen Hemminger <sthemmin@microsoft.com>;
> olaf@aepfle.de; apw@canonical.com; jasowang@redhat.com
> Cc: linux-kernel@vger.kernel.org; driverdev-devel@linuxdriverproject.org;
> Haiyang Zhang <haiyangz@microsoft.com>; vkuznets@redhat.com;
> marcelo.cerri@canonical.com; Michael Kelley (EOSG)
> <Michael.H.Kelley@microsoft.com>; Dexuan Cui <decui@microsoft.com>;
> stable@vger.kernel.org; Jack Morgenstein <jackm@mellanox.com>
> Subject: [PATCH v3 6/6] PCI: hv: fix 2 hang issues in hv_compose_msi_msg(=
)
>=20
> 1. With the patch "x86/vector/msi: Switch to global reservation mode"
> (4900be8360), the recent v4.15 and newer kernels always hang for 1-vCPU
> Hyper-V VM with SR-IOV. This is because when we reach
> hv_compose_msi_msg() by request_irq()  -> request_threaded_irq() ->
> __setup_irq()->irq_startup()  -> __irq_startup() -> irq_domain_activate_i=
rq() -
> > ... ->
> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is disabl=
ed in
> __setup_irq().
>=20
> Fix this by polling the channel.
>=20
> 2. If the host is ejecting the VF device before we reach hv_compose_msi_m=
sg(),
> in a UP VM, we can hang in hv_compose_msi_msg() forever, because at this
> time the host doesn't respond to the CREATE_INTERRUPT request. This issue
> also happens to old kernels like v4.14, v4.13, etc.
>=20
> Fix this by polling the channel for the PCI_EJECT message and
> hpdev->state, and by checking the PCI vendor ID.
>=20
> Note: actually the above issues also happen to a SMP VM, if "hbus->hdev-
> >channel->target_cpu =3D=3D smp_processor_id()" is true.
>=20
> Signed-off-by: Dexuan Cui <decui@microsoft.com>
> Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
> Tested-by: Chris Valean <v-chvale@microsoft.com>
> Cc: stable@vger.kernel.org
> Cc: Stephen Hemminger <sthemmin@microsoft.com>
> Cc: K. Y. Srinivasan <kys@microsoft.com>
> Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
> Cc: Jack Morgenstein <jackm@mellanox.com>
> ---

Acked-by: Haiyang Zhang <haiyangz@microsoft.com>