linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>, Keith Busch <keith.busch@intel.com>,
	Lukas Wunner <lukas@wunner.de>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: [PATCH v2] PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS
Date: Tue, 27 Mar 2018 13:48:35 +0300	[thread overview]
Message-ID: <20180327104835.19664-1-mika.westerberg@linux.intel.com> (raw)

Commit eed85ff4c0da ("PCI/DPC: Enable DPC only if AER is available")
made DPC control dependent whether AER is enabled in the OS. However, it
does not take into account situations where BIOS has not given OS
control of AER:

  acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  acpi PNP0A08:00: _OSC: platform does not support [AER]
  acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]

I think here it is better not to enable DPC even if the capability is
available because then it would be against what "Determination of DPC
Control" note in PCIe 4.0 sec 6.1.10 recommends.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
Changes from v1:

  * Rebased on top of pci.git/pci/portdrv
  * Dropped the other patch that disables interrupt generation during
    suspend because there is development on-going to get rid of separate
    PCIe portdrv and move everything to the PCI core instead.

 drivers/pci/pcie/portdrv_acpi.c | 4 ++--
 drivers/pci/pcie/portdrv_core.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/pcie/portdrv_acpi.c b/drivers/pci/pcie/portdrv_acpi.c
index 9d12650dc2ae..8ab5d434b9c6 100644
--- a/drivers/pci/pcie/portdrv_acpi.c
+++ b/drivers/pci/pcie/portdrv_acpi.c
@@ -47,11 +47,11 @@ void pcie_port_acpi_setup(struct pci_dev *port, int *srv_mask)
 
 	flags = root->osc_control_set;
 
-	*srv_mask = PCIE_PORT_SERVICE_DPC;
+	*srv_mask = 0;
 	if (flags & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)
 		*srv_mask |= PCIE_PORT_SERVICE_HP;
 	if (flags & OSC_PCI_EXPRESS_PME_CONTROL)
 		*srv_mask |= PCIE_PORT_SERVICE_PME;
 	if (flags & OSC_PCI_EXPRESS_AER_CONTROL)
-		*srv_mask |= PCIE_PORT_SERVICE_AER;
+		*srv_mask |= PCIE_PORT_SERVICE_AER | PCIE_PORT_SERVICE_DPC;
 }
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index a1f838f2646a..eb463966094e 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -236,7 +236,7 @@ static int get_port_device_capability(struct pci_dev *dev)
 	}
 
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
-	    pci_aer_available())
+	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	return services;
-- 
2.16.2


             reply	other threads:[~2018-03-27 10:48 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-27 10:48 Mika Westerberg [this message]
2018-03-30 22:34 ` [PATCH v2] PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180327104835.19664-1-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=keith.busch@intel.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).