From: Christoph Hellwig <hch@lst.de>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
iommu@lists.linux-foundation.org
Cc: x86@kernel.org, linux-block@vger.kernel.org,
linux-pci@vger.kernel.org, linux-mm@kvack.org,
linux-mips@linux-mips.org, sparclinux@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/12] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig
Date: Mon, 23 Apr 2018 19:04:15 +0200 [thread overview]
Message-ID: <20180423170419.20330-9-hch@lst.de> (raw)
In-Reply-To: <20180423170419.20330-1-hch@lst.de>
Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set. This covers 95% of the old arch magic. We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/alpha/Kconfig | 3 ---
arch/arc/Kconfig | 3 ---
arch/arm/mach-axxia/Kconfig | 1 -
arch/arm/mach-bcm/Kconfig | 1 -
arch/arm/mach-exynos/Kconfig | 1 -
arch/arm/mach-highbank/Kconfig | 1 -
arch/arm/mach-rockchip/Kconfig | 1 -
arch/arm/mach-shmobile/Kconfig | 1 -
arch/arm/mach-tegra/Kconfig | 1 -
arch/arm/mm/Kconfig | 3 ---
arch/arm64/Kconfig | 3 ---
arch/ia64/Kconfig | 3 ---
arch/mips/Kconfig | 3 ---
arch/powerpc/Kconfig | 3 ---
arch/riscv/Kconfig | 3 ---
arch/s390/Kconfig | 3 ---
arch/sparc/Kconfig | 4 ----
arch/x86/Kconfig | 4 ----
lib/Kconfig | 3 +++
19 files changed, 3 insertions(+), 42 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 1fd9645b0c67..aa7df1a36fd0 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -66,9 +66,6 @@ config ZONE_DMA
bool
default y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index f94c61da682a..7498aca4b887 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -458,9 +458,6 @@ config ARC_HAS_PAE40
Enable access to physical memory beyond 4G, only supported on
ARC cores with 40 bit Physical Addressing support
-config ARCH_DMA_ADDR_T_64BIT
- bool
-
config ARC_KVADDR_SIZE
int "Kernel Virtual Address Space size (MB)"
range 0 512
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index bb2ce1c63fd9..d3eae6037913 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -2,7 +2,6 @@
config ARCH_AXXIA
bool "LSI Axxia platforms"
depends on ARCH_MULTI_V7 && ARM_LPAE
- select ARCH_DMA_ADDR_T_64BIT
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index c2f3b0d216a4..c46a728df44e 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -211,7 +211,6 @@ config ARCH_BRCMSTB
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 647c319f9f5f..2ca405816846 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -112,7 +112,6 @@ config SOC_EXYNOS5440
bool "SAMSUNG EXYNOS5440"
default y
depends on ARCH_EXYNOS5
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
select PINCTRL_EXYNOS5440
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 81110ec34226..5552968f07f8 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,7 +1,6 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
depends on ARCH_MULTI_V7
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index a4065966881a..fafd3d7f9f8c 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -3,7 +3,6 @@ config ARCH_ROCKCHIP
depends on ARCH_MULTI_V7
select PINCTRL
select PINCTRL_ROCKCHIP
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_RESET_CONTROLLER
select ARM_AMBA
select ARM_GIC
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 280e7312a9e1..fe60cd09a5ca 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -29,7 +29,6 @@ config ARCH_RMOBILE
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7 && MMU
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_SHMOBILE
select ARM_GIC
select GPIOLIB
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 1e0aeb47bac6..7f3b83e0d324 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -15,6 +15,5 @@ menuconfig ARCH_TEGRA
select RESET_CONTROLLER
select SOC_BUS
select ZONE_DMA if ARM_LPAE
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
help
This enables support for NVIDIA Tegra based systems.
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 2f77c6344ef1..5a016bc80e26 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -674,9 +674,6 @@ config ARM_PV_FIXUP
def_bool y
depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE
-config ARCH_DMA_ADDR_T_64BIT
- bool
-
config ARM_THUMB
bool "Support Thumb user binaries" if !CPU_THUMBONLY && EXPERT
depends on CPU_THUMB_CAPABLE
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index b6aa33e642cc..4d924eb32e7f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -236,9 +236,6 @@ config ZONE_DMA32
config HAVE_GENERIC_GUP
def_bool y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config SMP
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 0e42731adaf1..685d557eea48 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -80,9 +80,6 @@ config MMU
bool
default y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config SWIOTLB
bool
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 985388078872..e10cc5c7be69 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1101,9 +1101,6 @@ config GPIO_TXX9
config FW_CFE
bool
-config ARCH_DMA_ADDR_T_64BIT
- def_bool (HIGHMEM && PHYS_ADDR_T_64BIT) || 64BIT
-
config ARCH_SUPPORTS_UPROBES
bool
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b3d091d65e05..a4b2ac7c3d2e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -13,9 +13,6 @@ config 64BIT
bool
default y if PPC64
-config ARCH_DMA_ADDR_T_64BIT
- def_bool PHYS_ADDR_T_64BIT
-
config MMU
bool
default y
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index f52f86f43a4b..17212ba54ee3 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -44,9 +44,6 @@ config ZONE_DMA32
bool
default y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config PAGE_OFFSET
hex
default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 89a007672f70..b794a2ab6d15 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -35,9 +35,6 @@ config GENERIC_BUG
config GENERIC_BUG_RELATIVE_POINTERS
def_bool y
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
-
config GENERIC_LOCKBREAK
def_bool y if SMP && PREEMPT
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index be770b511ddd..c1cfc17eb504 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -105,10 +105,6 @@ config ARCH_ATU
bool
default y if SPARC64
-config ARCH_DMA_ADDR_T_64BIT
- bool
- default y if ARCH_ATU
-
config STACKTRACE_SUPPORT
bool
default y if SPARC64
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 8fccdaf02bb0..07b031f99eb1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1476,10 +1476,6 @@ config X86_5LEVEL
Say N if unsure.
-config ARCH_DMA_ADDR_T_64BIT
- def_bool y
- depends on X86_64 || HIGHMEM64G
-
config X86_DIRECT_GBPAGES
def_bool y
depends on X86_64 && !DEBUG_PAGEALLOC
diff --git a/lib/Kconfig b/lib/Kconfig
index ce9fa962d59b..1f12faf03819 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -435,6 +435,9 @@ config NEED_SG_DMA_LENGTH
config NEED_DMA_MAP_STATE
bool
+config ARCH_DMA_ADDR_T_64BIT
+ def_bool 64BIT || PHYS_ADDR_T_64BIT
+
config IOMMU_HELPER
bool
--
2.17.0
next prev parent reply other threads:[~2018-04-23 17:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-23 17:04 centralize SWIOTLB config symbol and misc other cleanups V2 Christoph Hellwig
2018-04-23 17:04 ` [PATCH 01/12] iommu-common: move to arch/sparc Christoph Hellwig
2018-04-23 17:04 ` [PATCH 02/12] iommu-helper: unexport iommu_area_alloc Christoph Hellwig
2018-04-23 17:04 ` [PATCH 03/12] iommu-helper: mark iommu_is_span_boundary as inline Christoph Hellwig
2018-04-23 17:04 ` [PATCH 04/12] iommu-helper: move the IOMMU_HELPER config symbol to lib/ Christoph Hellwig
2018-04-23 17:04 ` [PATCH 05/12] scatterlist: move the NEED_SG_DMA_LENGTH config symbol to lib/Kconfig Christoph Hellwig
2018-04-23 17:04 ` [PATCH 06/12] dma-mapping: move the NEED_DMA_MAP_STATE " Christoph Hellwig
2018-04-23 17:04 ` [PATCH 07/12] arch: remove the ARCH_PHYS_ADDR_T_64BIT config symbol Christoph Hellwig
2018-04-23 17:04 ` Christoph Hellwig [this message]
2018-04-23 17:04 ` [PATCH 09/12] PCI: remove CONFIG_PCI_BUS_ADDR_T_64BIT Christoph Hellwig
2018-04-23 17:04 ` [PATCH 10/12] arm: don't build swiotlb by default Christoph Hellwig
2018-04-23 20:09 ` Konrad Rzeszutek Wilk
2018-04-23 17:04 ` [PATCH 11/12] swiotlb: move the SWIOTLB config symbol to lib/Kconfig Christoph Hellwig
2018-04-23 20:11 ` Konrad Rzeszutek Wilk
2018-04-23 23:52 ` Russell King - ARM Linux
2018-04-24 6:55 ` Christoph Hellwig
2018-04-24 7:47 ` Russell King - ARM Linux
2018-04-24 7:56 ` Christoph Hellwig
2018-04-23 17:04 ` [PATCH 12/12] swiotlb: remove the CONFIG_DMA_DIRECT_OPS ifdefs Christoph Hellwig
-- strict thread matches above, loose matches on Subject: below --
2018-04-15 14:59 centralize SWIOTLB config symbol and misc other cleanups Christoph Hellwig
2018-04-15 14:59 ` [PATCH 08/12] arch: define the ARCH_DMA_ADDR_T_64BIT config symbol in lib/Kconfig Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180423170419.20330-9-hch@lst.de \
--to=hch@lst.de \
--cc=iommu@lists.linux-foundation.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-mm@kvack.org \
--cc=linux-pci@vger.kernel.org \
--cc=sparclinux@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).