linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	Wolfram Sang <wsa@the-dreams.de>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH v4 2/6] PCI: rcar: Add missing irq_dispose_mapping() into failpath
Date: Thu, 24 May 2018 16:36:20 +0200	[thread overview]
Message-ID: <20180524143624.26718-3-marek.vasut+renesas@gmail.com> (raw)
In-Reply-To: <20180524143624.26718-1-marek.vasut+renesas@gmail.com>

The rcar_pcie_get_resources() is another misnomer with a side effect.
The function does not only get resources, but also maps MSI IRQs via
irq_of_parse_and_map(). In case anything fails afterward, the IRQ
mapping must be disposed through irq_dispose_mapping() which is not
done.

This patch handles irq_of_parse_and_map() failures in by disposing
of the mapping in rcar_pcie_get_resources() as well as in probe.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: No change
V3: No change
V4: Rebase on top of Lorenzo's pci/rcar, fix up the rebase breakage
    induced by patches therein
---
 drivers/pci/host/pcie-rcar.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 0879880f7975..6bb1cdec26be 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -950,18 +950,25 @@ static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
 	i = irq_of_parse_and_map(dev->of_node, 0);
 	if (!i) {
 		dev_err(dev, "cannot get platform resources for msi interrupt\n");
-		return -ENOENT;
+		err = -ENOENT;
+		goto err_irq1;
 	}
 	pcie->msi.irq1 = i;
 
 	i = irq_of_parse_and_map(dev->of_node, 1);
 	if (!i) {
 		dev_err(dev, "cannot get platform resources for msi interrupt\n");
-		return -ENOENT;
+		err = -ENOENT;
+		goto err_irq2;
 	}
 	pcie->msi.irq2 = i;
 
 	return 0;
+
+err_irq2:
+	irq_dispose_mapping(pcie->msi.irq1);
+err_irq1:
+	return err;
 }
 
 static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie,
@@ -1108,7 +1115,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 	err = clk_prepare_enable(pcie->bus_clk);
 	if (err) {
 		dev_err(dev, "failed to enable bus clock: %d\n", err);
-		goto err_pm_put;
+		goto err_unmap_msi_irqs;
 	}
 
 	err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node);
@@ -1151,6 +1158,10 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 err_clk_disable:
 	clk_disable_unprepare(pcie->bus_clk);
 
+err_unmap_msi_irqs:
+	irq_dispose_mapping(pcie->msi.irq2);
+	irq_dispose_mapping(pcie->msi.irq1);
+
 err_pm_put:
 	pm_runtime_put(dev);
 
-- 
2.16.2

  parent reply	other threads:[~2018-05-24 14:36 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-24 14:36 [PATCH v4 0/6] PCI: rcar: Failpath fixes Marek Vasut
2018-05-24 14:36 ` [PATCH v4 1/6] PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources() Marek Vasut
2018-05-28  8:51   ` Simon Horman
2018-05-24 14:36 ` Marek Vasut [this message]
2018-05-28  8:51   ` [PATCH v4 2/6] PCI: rcar: Add missing irq_dispose_mapping() into failpath Simon Horman
2018-05-24 14:36 ` [PATCH v4 3/6] PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails Marek Vasut
2018-05-28  8:52   ` Simon Horman
2018-05-24 14:36 ` [PATCH v4 4/6] PCI: rcar: Poll more often in rcar_pcie_wait_for_dl() Marek Vasut
2018-05-28  8:53   ` Simon Horman
2018-05-24 14:36 ` [PATCH v4 5/6] PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi failpath Marek Vasut
2018-05-28  8:53   ` Simon Horman
2018-05-24 14:36 ` [PATCH v4 6/6] PCI: rcar: Shut the PHY down in failpath Marek Vasut
2018-05-25 10:09   ` Geert Uytterhoeven
2018-05-25 18:34     ` Marek Vasut
2018-05-28  8:48   ` Simon Horman
2018-06-01 23:30     ` Marek Vasut
2018-06-29 13:38   ` Lorenzo Pieralisi
2018-05-25  9:35 ` [PATCH v4 0/6] PCI: rcar: Failpath fixes Lorenzo Pieralisi
2018-05-25  9:39   ` Geert Uytterhoeven
2018-05-25  9:56     ` Lorenzo Pieralisi
2018-05-25 10:01       ` Geert Uytterhoeven
2018-05-25 16:43 ` Lorenzo Pieralisi
2018-05-25 17:10   ` Marek Vasut
2018-05-28  8:54   ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180524143624.26718-3-marek.vasut+renesas@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=phil.edworthy@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).