From: Marek Vasut <marek.vasut@gmail.com>
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Phil Edworthy <phil.edworthy@renesas.com>,
Simon Horman <horms+renesas@verge.net.au>,
Wolfram Sang <wsa@the-dreams.de>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v4 5/6] PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi failpath
Date: Thu, 24 May 2018 16:36:23 +0200 [thread overview]
Message-ID: <20180524143624.26718-6-marek.vasut+renesas@gmail.com> (raw)
In-Reply-To: <20180524143624.26718-1-marek.vasut+renesas@gmail.com>
The rcar_pcie_enable_msi() creates IRQ mappings using irq_create_mapping()
before requesting the IRQs using devm_request_irq(). If devm_request_irq()
fails for some reason, rcar_pcie_enable_msi() does not remove the mapping.
Pull out the code for disposing IRQ mappings from rcar_pcie_teardown_msi()
into a separate function and call it from both rcar_pcie_teardown_msi()
and rcar_pcie_enable_msi() failpath to remove the mappings correctly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
---
V2: No change
V3: No change
V4: Rebase on top of Lorenzo's pci/rcar, fix up the rebase breakage
induced by patches therein
---
drivers/pci/host/pcie-rcar.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4843a4dc6059..636c3c5095d2 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -866,6 +866,20 @@ static const struct irq_domain_ops msi_domain_ops = {
.map = rcar_msi_map,
};
+static void rcar_pcie_unmap_msi(struct rcar_pcie *pcie)
+{
+ struct rcar_msi *msi = &pcie->msi;
+ int i, irq;
+
+ for (i = 0; i < INT_PCI_MSI_NR; i++) {
+ irq = irq_find_mapping(msi->domain, i);
+ if (irq > 0)
+ irq_dispose_mapping(irq);
+ }
+
+ irq_domain_remove(msi->domain);
+}
+
static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
{
struct device *dev = pcie->dev;
@@ -920,14 +934,13 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
return 0;
err:
- irq_domain_remove(msi->domain);
+ rcar_pcie_unmap_msi(pcie);
return err;
}
static void rcar_pcie_teardown_msi(struct rcar_pcie *pcie)
{
struct rcar_msi *msi = &pcie->msi;
- int irq, i;
/* Disable all MSI interrupts */
rcar_pci_write_reg(pcie, 0, PCIEMSIIER);
@@ -937,13 +950,7 @@ static void rcar_pcie_teardown_msi(struct rcar_pcie *pcie)
free_pages(msi->pages, 0);
- for (i = 0; i < INT_PCI_MSI_NR; i++) {
- irq = irq_find_mapping(msi->domain, i);
- if (irq > 0)
- irq_dispose_mapping(irq);
- }
-
- irq_domain_remove(msi->domain);
+ rcar_pcie_unmap_msi(pcie);
}
static int rcar_pcie_get_resources(struct rcar_pcie *pcie)
--
2.16.2
next prev parent reply other threads:[~2018-05-24 14:36 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-24 14:36 [PATCH v4 0/6] PCI: rcar: Failpath fixes Marek Vasut
2018-05-24 14:36 ` [PATCH v4 1/6] PCI: rcar: Pull bus clock enable/disable from rcar_pcie_get_resources() Marek Vasut
2018-05-28 8:51 ` Simon Horman
2018-05-24 14:36 ` [PATCH v4 2/6] PCI: rcar: Add missing irq_dispose_mapping() into failpath Marek Vasut
2018-05-28 8:51 ` Simon Horman
2018-05-24 14:36 ` [PATCH v4 3/6] PCI: rcar: Teardown MSI setup if rcar_pcie_enable() fails Marek Vasut
2018-05-28 8:52 ` Simon Horman
2018-05-24 14:36 ` [PATCH v4 4/6] PCI: rcar: Poll more often in rcar_pcie_wait_for_dl() Marek Vasut
2018-05-28 8:53 ` Simon Horman
2018-05-24 14:36 ` Marek Vasut [this message]
2018-05-28 8:53 ` [PATCH v4 5/6] PCI: rcar: Remove IRQ mappings in rcar_pcie_enable_msi failpath Simon Horman
2018-05-24 14:36 ` [PATCH v4 6/6] PCI: rcar: Shut the PHY down in failpath Marek Vasut
2018-05-25 10:09 ` Geert Uytterhoeven
2018-05-25 18:34 ` Marek Vasut
2018-05-28 8:48 ` Simon Horman
2018-06-01 23:30 ` Marek Vasut
2018-06-29 13:38 ` Lorenzo Pieralisi
2018-05-25 9:35 ` [PATCH v4 0/6] PCI: rcar: Failpath fixes Lorenzo Pieralisi
2018-05-25 9:39 ` Geert Uytterhoeven
2018-05-25 9:56 ` Lorenzo Pieralisi
2018-05-25 10:01 ` Geert Uytterhoeven
2018-05-25 16:43 ` Lorenzo Pieralisi
2018-05-25 17:10 ` Marek Vasut
2018-05-28 8:54 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180524143624.26718-6-marek.vasut+renesas@gmail.com \
--to=marek.vasut@gmail.com \
--cc=geert+renesas@glider.be \
--cc=horms+renesas@verge.net.au \
--cc=linux-pci@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marek.vasut+renesas@gmail.com \
--cc=phil.edworthy@renesas.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).