From: Keith Busch <keith.busch@intel.com>
To: Linux PCI <linux-pci@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Sinan Kaya <okaya@codeaurora.org>,
Oza Pawandeep <poza@codeaurora.org>,
Keith Busch <keith.busch@intel.com>
Subject: [PATCH 2/7] PCI/DPC: Defer event handling to work queue
Date: Wed, 20 Jun 2018 15:38:28 -0600 [thread overview]
Message-ID: <20180620213833.25072-2-keith.busch@intel.com> (raw)
In-Reply-To: <20180620213833.25072-1-keith.busch@intel.com>
This moves all event handling to the existing work queue, which will
make passing event information simpler to the handler.
Signed-off-by: Keith Busch <keith.busch@intel.com>
---
drivers/pci/pcie/dpc.c | 44 ++++++++++++++++++++------------------------
1 file changed, 20 insertions(+), 24 deletions(-)
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 972aac892846..5f5fac279c75 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -108,14 +108,6 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
return PCI_ERS_RESULT_RECOVERED;
}
-static void dpc_work(struct work_struct *work)
-{
- struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
- struct pci_dev *pdev = dpc->dev->port;
-
- /* We configure DPC so it only triggers on ERR_FATAL */
- pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
-}
static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
{
@@ -174,33 +166,21 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
}
}
-static irqreturn_t dpc_irq(int irq, void *context)
+static void dpc_work(struct work_struct *work)
{
- struct dpc_dev *dpc = (struct dpc_dev *)context;
+ struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
struct pci_dev *pdev = dpc->dev->port;
struct device *dev = &dpc->dev->device;
u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
-
- if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
- return IRQ_NONE;
-
- if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
- pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
- PCI_EXP_DPC_STATUS_INTERRUPT);
- return IRQ_HANDLED;
- }
-
- pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID,
- &source);
+ pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
dev_info(dev, "DPC containment event, status:%#06x source:%#06x\n",
- status, source);
+ status, source);
reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN) >> 1;
ext_reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT) >> 5;
-
dev_warn(dev, "DPC %s detected, remove downstream devices\n",
(reason == 0) ? "unmasked uncorrectable error" :
(reason == 1) ? "ERR_NONFATAL" :
@@ -208,10 +188,26 @@ static irqreturn_t dpc_irq(int irq, void *context)
(ext_reason == 0) ? "RP PIO error" :
(ext_reason == 1) ? "software trigger" :
"reserved error");
+
/* show RP PIO error detail information */
if (dpc->rp_extensions && reason == 3 && ext_reason == 0)
dpc_process_rp_pio_error(dpc);
+ /* We configure DPC so it only triggers on ERR_FATAL */
+ pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
+}
+
+static irqreturn_t dpc_irq(int irq, void *context)
+{
+ struct dpc_dev *dpc = (struct dpc_dev *)context;
+ struct pci_dev *pdev = dpc->dev->port;
+ u16 cap = dpc->cap_pos, status;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+
+ if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
+ return IRQ_NONE;
+
pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
PCI_EXP_DPC_STATUS_INTERRUPT);
if (status & PCI_EXP_DPC_STATUS_TRIGGER)
--
2.14.3
next prev parent reply other threads:[~2018-06-20 21:35 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 21:38 [PATCH 1/7] PCI/DPC: Leave interrupts enabled while handling event Keith Busch
2018-06-20 21:38 ` Keith Busch [this message]
2018-06-21 7:27 ` [PATCH 2/7] PCI/DPC: Defer event handling to work queue Christoph Hellwig
2018-06-21 7:28 ` Christoph Hellwig
2018-06-21 13:58 ` Keith Busch
2018-06-20 21:38 ` [PATCH 3/7] PCI/DPC: Remove rp_pio_status from dpc struct Keith Busch
2018-06-20 21:38 ` [PATCH 4/7] PCI/AER: API for obtaining AER information Keith Busch
2018-06-20 21:38 ` [PATCH 5/7] PCI/DPC: Print AER status in DPC event handling Keith Busch
2018-06-21 9:16 ` poza
2018-06-21 14:05 ` Keith Busch
2018-06-22 5:25 ` poza
2018-06-22 10:11 ` poza
2018-06-22 14:10 ` Keith Busch
2018-06-20 21:38 ` [PATCH 6/7] PCI/DPC: Use threaded IRQ for bottom half handling Keith Busch
2018-06-21 7:29 ` Christoph Hellwig
2018-06-20 21:38 ` [PATCH 7/7] PCI/DPC: Remove indirection waiting for inactive link Keith Busch
2018-06-20 21:42 ` [PATCH 1/7] PCI/DPC: Leave interrupts enabled while handling event Sinan Kaya
2018-06-20 21:54 ` Keith Busch
2018-06-20 21:59 ` Sinan Kaya
2018-06-22 5:26 ` poza
2018-07-16 22:07 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180620213833.25072-2-keith.busch@intel.com \
--to=keith.busch@intel.com \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=okaya@codeaurora.org \
--cc=poza@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).