From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
linux-pci@vger.kernel.org
Cc: "Nadav Haklai" <nadavh@marvell.com>,
"Russell King" <linux@arm.linux.org.uk>,
"Antoine Tenart" <antoine.tenart@bootlin.com>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Jason Gunthorpe" <jgunthorpe@obsidianresearch.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Miquèl Raynal" <miquel.raynal@bootlin.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] PCI: mvebu: Convert to use pci_host_bridge directly
Date: Fri, 29 Jun 2018 11:10:06 +0200 [thread overview]
Message-ID: <20180629091007.31069-3-thomas.petazzoni@bootlin.com> (raw)
In-Reply-To: <20180629091007.31069-1-thomas.petazzoni@bootlin.com>
Rather than using the ARM-specific pci_common_init_dev() API, use the
pci_host_bridge logic directly.
Unfortunately, we can't use devm_of_pci_get_host_bridge_resources(),
because the DT binding for describing PCIe apertures for this PCI
controller is a bit special, and we cannot retrieve them from the
'ranges' property. Therefore, we still have some special code to
handle this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/pci/controller/pci-mvebu.c | 145 ++++++++++++++++++-------------------
1 file changed, 71 insertions(+), 74 deletions(-)
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 0e729bab14c0..6e801cef2c5f 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -71,6 +71,7 @@ struct mvebu_pcie {
struct platform_device *pdev;
struct mvebu_pcie_port *ports;
struct msi_controller *msi;
+ struct list_head resources;
struct resource io;
struct resource realio;
struct resource mem;
@@ -632,7 +633,7 @@ static struct mvebu_pcie_port *mvebu_pcie_find_port(struct mvebu_pcie *pcie,
static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
- struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
+ struct mvebu_pcie *pcie = bus->sysdata;
struct mvebu_pcie_port *port;
int ret;
@@ -658,7 +659,7 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
- struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata);
+ struct mvebu_pcie *pcie = bus->sysdata;
struct mvebu_pcie_port *port;
int ret;
@@ -689,36 +690,6 @@ static struct pci_ops mvebu_pcie_ops = {
.write = mvebu_pcie_wr_conf,
};
-static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct mvebu_pcie *pcie = sys_to_pcie(sys);
- int err, i;
-
- pcie->mem.name = "PCI MEM";
- pcie->realio.name = "PCI I/O";
-
- if (resource_size(&pcie->realio) != 0)
- pci_add_resource_offset(&sys->resources, &pcie->realio,
- sys->io_offset);
-
- pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
- pci_add_resource(&sys->resources, &pcie->busn);
-
- err = devm_request_pci_bus_resources(&pcie->pdev->dev, &sys->resources);
- if (err)
- return 0;
-
- for (i = 0; i < pcie->nports; i++) {
- struct mvebu_pcie_port *port = &pcie->ports[i];
-
- if (!port->base)
- continue;
- mvebu_pcie_setup_hw(port);
- }
-
- return 1;
-}
-
static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
const struct resource *res,
resource_size_t start,
@@ -749,26 +720,6 @@ static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
return start;
}
-static void mvebu_pcie_enable(struct mvebu_pcie *pcie)
-{
- struct hw_pci hw;
-
- memset(&hw, 0, sizeof(hw));
-
-#ifdef CONFIG_PCI_MSI
- hw.msi_ctrl = pcie->msi;
-#endif
-
- hw.nr_controllers = 1;
- hw.private_data = (void **)&pcie;
- hw.setup = mvebu_pcie_setup;
- hw.map_irq = of_irq_parse_and_map_pci;
- hw.ops = &mvebu_pcie_ops;
- hw.align_resource = mvebu_pcie_align_resource;
-
- pci_common_init_dev(&pcie->pdev->dev, &hw);
-}
-
/*
* Looks up the list of register addresses encoded into the reg =
* <...> property for one that matches the given port/lane. Once
@@ -1022,28 +973,38 @@ static void mvebu_pcie_powerdown(struct mvebu_pcie_port *port)
clk_disable_unprepare(port->clk);
}
-static int mvebu_pcie_probe(struct platform_device *pdev)
+/*
+ * We can't use devm_of_pci_get_host_bridge_resources() because we
+ * need to parse our special DT properties encoding the MEM and IO
+ * apertures.
+ */
+static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
{
- struct device *dev = &pdev->dev;
- struct mvebu_pcie *pcie;
+ struct device *dev = &pcie->pdev->dev;
struct device_node *np = dev->of_node;
- struct device_node *child;
- int num, i, ret;
+ int ret;
- pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
+ INIT_LIST_HEAD(&pcie->resources);
- pcie->pdev = pdev;
- platform_set_drvdata(pdev, pcie);
+ /* Get the bus range */
+ ret = of_pci_parse_bus_range(np, &pcie->busn);
+ if (ret) {
+ dev_err(dev, "failed to parse bus-range property: %d\n", ret);
+ return ret;
+ }
+ pci_add_resource(&pcie->resources, &pcie->busn);
- /* Get the PCIe memory and I/O aperture */
+ /* Get the PCIe memory aperture */
mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
if (resource_size(&pcie->mem) == 0) {
dev_err(dev, "invalid memory aperture size\n");
return -EINVAL;
}
+ pcie->mem.name = "PCI MEM";
+ pci_add_resource_offset(&pcie->resources, &pcie->mem, 0);
+
+ /* Get the PCIe IO aperture */
mvebu_mbus_get_pcie_io_aperture(&pcie->io);
if (resource_size(&pcie->io) != 0) {
@@ -1055,12 +1016,42 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
} else
pcie->realio = pcie->io;
- /* Get the bus range */
- ret = of_pci_parse_bus_range(np, &pcie->busn);
- if (ret) {
- dev_err(dev, "failed to parse bus-range property: %d\n", ret);
+ pcie->realio.name = "PCI I/O";
+
+ if (resource_size(&pcie->realio) != 0)
+ pci_add_resource_offset(&pcie->resources, &pcie->realio, 0);
+
+ ret = devm_request_pci_bus_resources(dev, &pcie->resources);
+ if (ret)
+ return 0;
+
+ ret = pci_remap_iospace(&pcie->realio, pcie->realio.start);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mvebu_pcie_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mvebu_pcie *pcie;
+ struct pci_host_bridge *bridge;
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ int num, i, ret;
+
+ bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct mvebu_pcie));
+ if (!bridge)
+ return -ENOMEM;
+
+ pcie = pci_host_bridge_priv(bridge);
+ pcie->pdev = pdev;
+ platform_set_drvdata(pdev, pcie);
+
+ ret = mvebu_pcie_parse_request_resources(pcie);
+ if (ret)
return ret;
- }
num = of_get_available_child_count(np);
@@ -1104,18 +1095,24 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
continue;
}
+ mvebu_pcie_setup_hw(port);
mvebu_pcie_set_local_dev_nr(port, 1);
mvebu_pci_sw_bridge_init(port);
}
pcie->nports = i;
- for (i = 0; i < (IO_SPACE_LIMIT - SZ_64K); i += SZ_64K)
- pci_ioremap_io(i, pcie->io.start + i);
-
- mvebu_pcie_enable(pcie);
-
- return 0;
+ list_splice_init(&pcie->resources, &bridge->windows);
+ bridge->dev.parent = dev;
+ bridge->sysdata = pcie;
+ bridge->busnr = 0;
+ bridge->ops = &mvebu_pcie_ops;
+ bridge->map_irq = of_irq_parse_and_map_pci;
+ bridge->swizzle_irq = pci_common_swizzle;
+ bridge->align_resource = mvebu_pcie_align_resource;
+ bridge->msi = pcie->msi;
+
+ return pci_host_probe(bridge);
}
static const struct of_device_id mvebu_pcie_of_match_table[] = {
--
2.14.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-06-29 9:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-29 9:10 [PATCH 0/3] PCI: mvebu: cleanup and improvements Thomas Petazzoni
2018-06-29 9:10 ` [PATCH 1/3] PCI: mvebu: Remove redundant platform_set_drvdata() call Thomas Petazzoni
2018-06-29 9:10 ` Thomas Petazzoni [this message]
2018-07-05 16:23 ` [PATCH 2/3] PCI: mvebu: Convert to use pci_host_bridge directly Lorenzo Pieralisi
2018-07-06 7:13 ` Thomas Petazzoni
2018-06-29 9:10 ` [PATCH 3/3] PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() Thomas Petazzoni
2018-07-13 15:27 ` [PATCH 0/3] PCI: mvebu: cleanup and improvements Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180629091007.31069-3-thomas.petazzoni@bootlin.com \
--to=thomas.petazzoni@bootlin.com \
--cc=antoine.tenart@bootlin.com \
--cc=bhelgaas@google.com \
--cc=gregory.clement@bootlin.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@bootlin.com \
--cc=nadavh@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).