Re: [PATCH] PCI: rcar: Clean up PHY init on failure

[Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>]

On Fri, May 25, 2018 at 08:33:26PM +0200, Marek Vasut wrote:
> If the Gen3 PHY fails to power up, the code does not undo the
> initialization caused by phy_init(). Add the missing failure
> handling to the rcar_pcie_phy_init_gen3() function.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Phil Edworthy <phil.edworthy@renesas.com>
> Cc: Simon Horman <horms+renesas@verge.net.au>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Cc: linux-renesas-soc@vger.kernel.org
> Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
> ---
>  drivers/pci/host/pcie-rcar.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)

Applied to pci/controller-fixes to be tentatively merged for
-rc4, thanks.

Lorenzo

> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index 695781934f0a..477bf40cc031 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -678,7 +678,11 @@ static int rcar_pcie_phy_init_gen3(struct rcar_pcie *pcie)
>  	if (err)
>  		return err;
>  
> -	return phy_power_on(pcie->phy);
> +	err = phy_power_on(pcie->phy);
> +	if (err)
> +		phy_exit(pcie->phy);
> +
> +	return err;
>  }
>  
>  static int rcar_msi_alloc(struct rcar_msi *chip)
> -- 
> 2.16.2
>