From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: "Baruch Siach" <baruch@tkos.co.il>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Jason Cooper" <jason@lakedaemon.net>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Jan Kundrát" <jan.kundrat@cesnet.cz>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [BISECTED] Regression: Solidrun Clearfog Base won't boot since "PCI: mvebu: Only remap I/O space if configured"
Date: Thu, 13 Sep 2018 09:45:15 +0200 [thread overview]
Message-ID: <20180913094515.351967bb@windsurf> (raw)
In-Reply-To: <20180912231050.GX30658@n2100.armlinux.org.uk>
Russell, Baruch, Jan,
On Thu, 13 Sep 2018 00:10:51 +0100, Russell King - ARM Linux wrote:
> It's probably the latter - the region is probably already mapped, that
> being the PCI IO region.
>
> The original driver was setup to call pci_ioremap_io() as the very
> last thing - and as the driver is non-removable, we were guaranteed
> to never tear down this mapping (which is sensible, it's published
> to userspace.)
>
> However, the current code calls pci_ioremap_io() much earlier, in
> a path where probe failures can occur. This breaks pci_ioremap_io()'s
> requirements - it must not be called more than once. So:
>
> ee1604381a37 ("PCI: mvebu: Only remap I/O space if configured")
>
> is basically incorrect - pci_ioremap_io() needs to move back to a
> place where it is only called in a path which will never fail.
> However, looking at the generic host bits, I'm not sure such a place
> exists in the new effort to make stuff more generic.
What about something like the below. I tested it, including the error
case by forcing an -EPROBE_DEFER. The new pci_unmap_io() is modeled
after pci_unmap_iospace(). Actually, I would prefer to use
pci_remap_iospace() and pci_unmap_iospace() but for now this API
doesn't allow overloading the memory type used for the mapping.
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 2cfbc531f63b..cee0e2be5ac7 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -185,6 +185,7 @@ static inline void pci_ioremap_set_mem_type(int mem_type) {}
#endif
extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+extern void pci_unmap_io(unsigned int offset);
/*
* PCI configuration space mapping function.
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index fc91205ff46c..f3a4df44bb27 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -482,6 +482,14 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
}
EXPORT_SYMBOL_GPL(pci_ioremap_io);
+void pci_unmap_io(unsigned int offset)
+{
+ BUG_ON(offset + SZ_64K > IO_SPACE_LIMIT);
+
+ unmap_kernel_range(PCI_IO_VIRT_BASE + offset, SZ_64K);
+}
+EXPORT_SYMBOL_GPL(pci_unmap_io);
+
void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size)
{
return arch_ioremap_caller(res_cookie, size, MT_UNCACHED,
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 50eb0729385b..772cff19c2ce 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -1145,7 +1145,6 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
{
struct device *dev = &pcie->pdev->dev;
struct device_node *np = dev->of_node;
- unsigned int i;
int ret;
INIT_LIST_HEAD(&pcie->resources);
@@ -1179,15 +1178,34 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
resource_size(&pcie->io) - 1);
pcie->realio.name = "PCI I/O";
- for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
- pci_ioremap_io(i, pcie->io.start + i);
-
pci_add_resource(&pcie->resources, &pcie->realio);
}
return devm_request_pci_bus_resources(dev, &pcie->resources);
}
+static void mvebu_pcie_map_io(struct mvebu_pcie *pcie)
+{
+ int i;
+
+ if (resource_size(&pcie->io) == 0)
+ return;
+
+ for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
+ pci_ioremap_io(i, pcie->io.start + i);
+}
+
+static void mvebu_pcie_unmap_io(struct mvebu_pcie *pcie)
+{
+ int i;
+
+ if (resource_size(&pcie->io) == 0)
+ return;
+
+ for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
+ pci_unmap_io(i);
+}
+
static int mvebu_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1258,6 +1276,8 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
pcie->nports = i;
+ mvebu_pcie_map_io(pcie);
+
list_splice_init(&pcie->resources, &bridge->windows);
bridge->dev.parent = dev;
bridge->sysdata = pcie;
@@ -1268,7 +1288,13 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
bridge->align_resource = mvebu_pcie_align_resource;
bridge->msi = pcie->msi;
- return pci_host_probe(bridge);
+ ret = pci_host_probe(bridge);
+ if (ret) {
+ mvebu_pcie_unmap_io(pcie);
+ return ret;
+ }
+
+ return 0;
}
static const struct of_device_id mvebu_pcie_of_match_table[] = {
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-09-13 7:45 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 16:11 [BISECTED] Regression: Solidrun Clearfog Base won't boot since "PCI: mvebu: Only remap I/O space if configured" Jan Kundrát
2018-09-12 18:49 ` Baruch Siach
2018-09-12 18:50 ` Thomas Petazzoni
2018-09-12 19:00 ` Jan Kundrát
2018-09-12 23:10 ` Russell King - ARM Linux
2018-09-13 3:19 ` Baruch Siach
2018-09-13 7:45 ` Thomas Petazzoni [this message]
2018-09-13 8:20 ` Jan Kundrát
2018-09-13 8:42 ` Thomas Petazzoni
2018-09-24 10:02 ` Jan Kundrát
2018-09-24 10:10 ` Thomas Petazzoni
2018-09-24 10:12 ` Russell King - ARM Linux
2018-09-24 10:26 ` Thomas Petazzoni
2018-09-24 11:13 ` Russell King - ARM Linux
2018-09-24 12:12 ` Thomas Petazzoni
2018-09-24 12:46 ` Lorenzo Pieralisi
2018-09-24 13:10 ` Thomas Petazzoni
2018-09-24 14:15 ` Lorenzo Pieralisi
2018-09-24 14:52 ` Thomas Petazzoni
2018-09-24 16:42 ` Lorenzo Pieralisi
2018-10-01 10:56 ` Jan Kundrát
2018-10-01 12:51 ` Thomas Petazzoni
2018-10-01 21:01 ` Bjorn Helgaas
2018-09-25 8:18 ` Andrew Murray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180913094515.351967bb@windsurf \
--to=thomas.petazzoni@bootlin.com \
--cc=baruch@tkos.co.il \
--cc=bhelgaas@google.com \
--cc=jan.kundrat@cesnet.cz \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).