From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
linux-pci@vger.kernel.org, "Jan Kundrát" <jan.kundrat@cesnet.cz>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Gregory Clement <gregory.clement@bootlin.com>,
linux-arm-kernel@lists.infradead.org,
Russell King <linux@arm.linux.org.uk>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH] PCI: mvebu: Fix PCI I/O mapping creation sequence
Date: Mon, 1 Oct 2018 14:49:34 +0200 [thread overview]
Message-ID: <20181001124934.7222-1-thomas.petazzoni@bootlin.com> (raw)
Commit ee1604381a371 ("PCI: mvebu: Only remap I/O space if
configured") had the side effect that the PCI I/O mapping was created
much earlier than before, at a point where the probe() of the driver
could still fail. This is for example a problem if one gets an
-EPROBE_DEFER at some point during probe(), after pci_ioremap_io() has
been called.
Indeed, there is currently no function to undo what pci_ioremap_io()
did, and switching to pci_remap_iospace() is not an option in
pci-mvebu due to the need for special memory attributes on Armada 38x.
Reverting ee1604381a371 ("PCI: mvebu: Only remap I/O space if
configured") would be a possibility, but it would require also
reverting 42342073e38b5 ("PCI: mvebu: Convert to use pci_host_bridge
directly"). So instead, we use an open-coded version of
pci_host_probe() that creates the PCI I/O mapping at a point where we
are guaranteed not to fail anymore.
Reported-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Fixes: ee1604381a371 ("PCI: mvebu: Only remap I/O space if configured")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
drivers/pci/controller/pci-mvebu.c | 52 +++++++++++++++++++++++++++++++++++---
1 file changed, 48 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 50eb0729385b..a41d79b8d46a 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -1145,7 +1145,6 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
{
struct device *dev = &pcie->pdev->dev;
struct device_node *np = dev->of_node;
- unsigned int i;
int ret;
INIT_LIST_HEAD(&pcie->resources);
@@ -1179,13 +1178,58 @@ static int mvebu_pcie_parse_request_resources(struct mvebu_pcie *pcie)
resource_size(&pcie->io) - 1);
pcie->realio.name = "PCI I/O";
+ pci_add_resource(&pcie->resources, &pcie->realio);
+ }
+
+ return devm_request_pci_bus_resources(dev, &pcie->resources);
+}
+
+/*
+ * This is a copy of pci_host_probe(), except that it does the I/O
+ * remap as the last step, once we are sure we won't fail.
+ *
+ * It should be removed once the I/O remap error handling issue has
+ * been sorted out.
+ */
+static int mvebu_pci_host_probe(struct pci_host_bridge *bridge)
+{
+ struct mvebu_pcie *pcie;
+ struct pci_bus *bus, *child;
+ int ret;
+
+ ret = pci_scan_root_bus_bridge(bridge);
+ if (ret < 0) {
+ dev_err(bridge->dev.parent, "Scanning root bridge failed");
+ return ret;
+ }
+
+ pcie = pci_host_bridge_priv(bridge);
+ if (resource_size(&pcie->io) != 0) {
+ unsigned int i;
+
for (i = 0; i < resource_size(&pcie->realio); i += SZ_64K)
pci_ioremap_io(i, pcie->io.start + i);
+ }
- pci_add_resource(&pcie->resources, &pcie->realio);
+ bus = bridge->bus;
+
+ /*
+ * We insert PCI resources into the iomem_resource and
+ * ioport_resource trees in either pci_bus_claim_resources()
+ * or pci_bus_assign_resources().
+ */
+ if (pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_claim_resources(bus);
+ } else {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
}
- return devm_request_pci_bus_resources(dev, &pcie->resources);
+ pci_bus_add_devices(bus);
+ return 0;
}
static int mvebu_pcie_probe(struct platform_device *pdev)
@@ -1268,7 +1312,7 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
bridge->align_resource = mvebu_pcie_align_resource;
bridge->msi = pcie->msi;
- return pci_host_probe(bridge);
+ return mvebu_pci_host_probe(bridge);
}
static const struct of_device_id mvebu_pcie_of_match_table[] = {
--
2.14.4
next reply other threads:[~2018-10-01 12:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-01 12:49 Thomas Petazzoni [this message]
2018-10-01 14:01 ` [PATCH] PCI: mvebu: Fix PCI I/O mapping creation sequence Lorenzo Pieralisi
2018-10-01 14:44 ` Jan Kundrát
2018-10-01 19:25 ` Jan Kundrát
2018-10-01 20:44 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181001124934.7222-1-thomas.petazzoni@bootlin.com \
--to=thomas.petazzoni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=bhelgaas@google.com \
--cc=gregory.clement@bootlin.com \
--cc=jan.kundrat@cesnet.cz \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox