From: Keith Busch <keith.busch@intel.com>
To: linux-pci@vger.kernel.org, Bjorn Helgaas <helgaas@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Subject: [PATCHv2 3/4] PCI/AER: Refactor error injection fallbacks
Date: Thu, 11 Oct 2018 12:34:12 -0600 [thread overview]
Message-ID: <20181011183413.13183-4-keith.busch@intel.com> (raw)
In-Reply-To: <20181011183413.13183-1-keith.busch@intel.com>
This patch just moves the bus ops fallback into separate functions. No
functional change here.
Signed-off-by: Keith Busch <keith.busch@intel.com>
---
drivers/pci/pcie/aer_inject.c | 66 +++++++++++++++++++++++++------------------
1 file changed, 38 insertions(+), 28 deletions(-)
diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c
index 726987f8d53c..95d4759664b3 100644
--- a/drivers/pci/pcie/aer_inject.c
+++ b/drivers/pci/pcie/aer_inject.c
@@ -176,14 +176,48 @@ static u32 *find_pci_config_dword(struct aer_error *err, int where,
return target;
}
+static int aer_inj_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ struct pci_ops *ops, *my_ops;
+ int rv;
+
+ ops = __find_pci_bus_ops(bus);
+ if (!ops)
+ return -1;
+
+ my_ops = bus->ops;
+ bus->ops = ops;
+ rv = ops->read(bus, devfn, where, size, val);
+ bus->ops = my_ops;
+
+ return rv;
+}
+
+static int aer_inj_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ struct pci_ops *ops, *my_ops;
+ int rv;
+
+ ops = __find_pci_bus_ops(bus);
+ if (!ops)
+ return -1;
+
+ my_ops = bus->ops;
+ bus->ops = ops;
+ rv = ops->write(bus, devfn, where, size, val);
+ bus->ops = my_ops;
+
+ return rv;
+}
+
static int aer_inj_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
u32 *sim;
struct aer_error *err;
unsigned long flags;
- struct pci_ops *ops;
- struct pci_ops *my_ops;
int domain;
int rv;
@@ -204,18 +238,7 @@ static int aer_inj_read_config(struct pci_bus *bus, unsigned int devfn,
return 0;
}
out:
- ops = __find_pci_bus_ops(bus);
- /*
- * pci_lock must already be held, so we can directly
- * manipulate bus->ops. Many config access functions,
- * including pci_generic_config_read() require the original
- * bus->ops be installed to function, so temporarily put them
- * back.
- */
- my_ops = bus->ops;
- bus->ops = ops;
- rv = ops->read(bus, devfn, where, size, val);
- bus->ops = my_ops;
+ rv = aer_inj_read(bus, devfn, where, size, val);
spin_unlock_irqrestore(&inject_lock, flags);
return rv;
}
@@ -227,8 +250,6 @@ static int aer_inj_write_config(struct pci_bus *bus, unsigned int devfn,
struct aer_error *err;
unsigned long flags;
int rw1cs;
- struct pci_ops *ops;
- struct pci_ops *my_ops;
int domain;
int rv;
@@ -252,18 +273,7 @@ static int aer_inj_write_config(struct pci_bus *bus, unsigned int devfn,
return 0;
}
out:
- ops = __find_pci_bus_ops(bus);
- /*
- * pci_lock must already be held, so we can directly
- * manipulate bus->ops. Many config access functions,
- * including pci_generic_config_write() require the original
- * bus->ops be installed to function, so temporarily put them
- * back.
- */
- my_ops = bus->ops;
- bus->ops = ops;
- rv = ops->write(bus, devfn, where, size, val);
- bus->ops = my_ops;
+ rv = aer_inj_write(bus, devfn, where, size, val);
spin_unlock_irqrestore(&inject_lock, flags);
return rv;
}
--
2.14.4
next prev parent reply other threads:[~2018-10-11 18:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-11 18:34 [PATCHv2 0/4] aer inject updates Keith Busch
2018-10-11 18:34 ` [PATCHv2 1/4] PCI/AER: Reuse existing pcie_port_find_device() interface Keith Busch
2018-10-11 18:34 ` [PATCHv2 2/4] PCI/AER: Abstract AER interrupt handling Keith Busch
2018-10-11 18:34 ` Keith Busch [this message]
2018-10-11 18:34 ` [PATCHv2 4/4] PCI/AER: Covertly inject errors with ftrace hooks Keith Busch
2018-10-11 19:41 ` Bjorn Helgaas
2018-10-11 19:42 ` Keith Busch
2018-10-11 19:02 ` [PATCHv2 0/4] aer inject updates Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011183413.13183-4-keith.busch@intel.com \
--to=keith.busch@intel.com \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).